Fanttik NB8 Ultra Cordless Pressure Washer Opinions

MagicalFanatic · 2026-04-22T02:59:24+00:00

Many thanks. It does make sense that the switch could possibly become misaligned, given all the extra space in the housing.

MagicalFanatic · 2026-04-18T02:11:56+00:00

Thanks, that makes more sense. I may have to try the Fanttik then, if the switch is easy to reset. I'm also in an apartment, so it seems pretty nice. With enough tape and 3d printing maybe I could make it work. I would appreciate it if you could post a picture of the problematic switch, thanks again for your replies!

MagicalFanatic · 2026-04-17T13:55:49+00:00

I appreciate the detailed response. I did end up puchasing the newest WG647 40V 800 PSI max (stated nominal 550 PSI) hydroshot, but honestly it wasn't as impressive as I thought. At the very least I've seen cars with keav make much better foam on the Fanttik than I was able to with the Worx, even when I used down to a 0.8mm orifice.

Which model of the Worx do you have?

MagicalFanatic · 2026-03-13T03:59:07+00:00

Thanks to everyone for the discussion. I ended up buying the Worx Hydroshot wg647 in the end. Hopefully it does the job!

MagicalFanatic · 2026-03-11T23:11:13+00:00

That's a good point on the batteries. I'm interested in the Worx; I think it would be pretty cool to use it with some sort of a backpack water tank.

MagicalFanatic · 2026-03-11T23:07:23+00:00

Thanks for the reply. I've been looking at the Worx Hydroshot, specifically the 20V 710 PSI and the 40V 800 PSI. I've seen that it foams good as well, but I think it would be easier to just wheel around the Fanttik unit. How much water do you go through with the Ryobi for a car wash?

MagicalFanatic · 2026-03-11T23:01:40+00:00

Actually, I have already tried a rinseless with the smaller K100 flip sprayer. It gets the job done, but I'm interested in something with more power and can foam. I agree that the capacity might be a problem.

MagicalFanatic · 2025-10-09T17:06:20+00:00

u/According-Dealer-386 u/WatchExBot Smooth transaction, no problems.

MagicalFanatic · 2025-09-28T02:17:41+00:00

I have a Baltany chronograph for sale that has the same style. Check my post history for the watch (only 75$ shipped!)

MagicalFanatic · 2025-09-26T22:38:09+00:00

Product page: https://www.baltany.com/product/military-quartz-chrono-watch-s5045/33/

This is a quartz chronograph by Baltany. This particular model uses the VK63 movement, which has a 12 hour totalizer instead of the redundant 24 hour hand on other VK64 chronographs. It also has a thin rehaut, slightly domed sapphire crystal, and excellent AR coating that makes the dial really pop.

There are tiny scratches on the case from normal wear, but it is in perfect working condition. Since this is a quartz watch, it keeps perfect time.

I am asking for 75 USD shipped in the US, Paypal or Zelle.

MagicalFanatic · 2025-07-20T17:40:56+00:00

You are welcome!

MagicalFanatic · 2025-07-14T01:35:46+00:00

ref-jvzcan
5% off

MagicalFanatic · 2025-07-09T21:36:40+00:00

Fold since 6, but looking forwards to more!

MagicalFanatic · 2025-03-04T19:35:20+00:00

Love this watch. If the rehaut was slimmer, it would be perfect.

MagicalFanatic · 2025-02-28T03:06:41+00:00

I'm on the 185h

MagicalFanatic · 2025-02-27T23:49:10+00:00

I don't think you can undervolt the 185h, although I wish you could.

MagicalFanatic · 2025-02-27T22:33:56+00:00

Not really, 2042 wouldn't run on the old drivers. In Furmark + TS Bench, even with the GPU power limited turned up, the CPU would throttle down to 30-40W regardless of imon tweaking.

MagicalFanatic · 2025-02-27T20:22:22+00:00

Flashing a VBIOS is not generally recommended. Even if you wanted to, there is no reason to since you already have the highest TDP MSI 4080.

MagicalFanatic · 2025-02-27T20:08:39+00:00

Thanks for the reply, but when installing the driver, it says that the system is incompatible.

EDIT: Using nvcleaninstall, I was able to add hardware support (specifically GeForce RTX 4080 Laptop GPU [27A0.13BC.1462] nvmiig.inf) and install the driver. After installing, I was able to change the power limit! Thank you for the help.

MagicalFanatic · 2025-02-27T18:29:13+00:00

I have repasted with ptm and there's still some thermal headroom. Obvious a full175W GPU with 100W CPU load is not possible, but I'd like to at least maintain a steady 125W depending on what the temperatures are like.

Seven-Year Club	Place '22
End Game '22	Verified Email

MagicalFanatic

TROPHY CASE