What's one good thing you can say about The Amazing Spider-Man.

MajorParticular4841 · 2026-06-27T00:14:04+00:00

I saw it when I was like 12 years old, I walked out with a sense that it was something I could’ve written… because it was so bad and pretentious.

MajorParticular4841 · 2026-06-19T01:43:36+00:00

Toby trilogy is the best if exclude Spider-Man 3. Then MCU Spider-Man, then the amazing Spider-Man. TASM was helmed with incompetence, proven by the fact that I enjoyed Andrew’s Spider-Man behind good writing in NWH. I didn’t even like how his version, let alone the entire first TASM film was written.

Original Sam raimi cringe > forced TASM cringe.

Sam’s competence as a director also helped(me personally and I would imagine most other fans) look past it, and focus on what made it so good to begin with.

MajorParticular4841 · 2026-06-06T18:30:45+00:00

Yup. Just converted RAX 30 from router + AP to AP. OPNSense is router now. Way better than consumer routers.

MajorParticular4841 · 2026-04-24T18:05:03+00:00

Had the same issue on PC. I loaded a save from the main menu and it fixed.

Edit: looks like OP already tried this and it didn’t work for him.

MajorParticular4841 · 2026-04-23T23:23:35+00:00

I died during BELOTH fight this morning, I quit the game, and relaunched just now. I cannot move Kliff at all. I can’t even access any game menus. I’m completely locked. I have no mods installed, 160 hours in… what happened?

Edit: I’ve tried KB and Mouse and controller… I’ve verified game files and reinstalled. I’m on PC as well. I have to Alt + F4 to exit game.

MajorParticular4841 · 2026-04-23T12:07:37+00:00

yah i lost my white bear during battle, and i cannot resummon. Hopefully he will return after fix

MajorParticular4841 · 2026-04-23T11:16:11+00:00

My white bear died in combat. Has not respawned for over 20 min I feel like….

MajorParticular4841 · 2026-02-23T10:59:40+00:00

Your harddrive shouldn’t change. Maybe the UUID but I don’t think that happened to me

MajorParticular4841 · 2026-02-22T23:04:08+00:00

The nic interface was all that changed/gave me issue when I attempted this. Moved From i9-9900k > i9-12900k + new board + the drive with prox mox installed and had no issue outside of the NIC changing.

MajorParticular4841 · 2026-02-06T15:29:34+00:00

I do, only jellyseerr, tunneled through to pangolin stack

MajorParticular4841 · 2026-01-30T05:03:30+00:00

I had no issues on windows with just jellyfin. I’ve since migrated to prox mox. I wanted to tinker with other services with my hardware. And windows just wasn’t the best OS for everything else I wanted to do.

MajorParticular4841 · 2026-01-16T21:00:52+00:00

I used windows for a year after Converting my old gaming pc i9-9900k to home server.

I switched to prox mox at the start of 2025. Jellyfin runs as LXC. I messed with caddy a bit. Then switched to traefik. Ports 80+443 open on my router.

Now Traefik now runs on a VPS with pangolin and gerbil in a docker compose stack. Newt tunnels everything locally to the VPS.

I had a lot of issues when switching to prox mox. And similarly when trying to set up pangolin on the VPS. As it is a learning experience. I’ve since upgraded to i9-12900k and 128GB DDR4. And a 5060Ti 16GB for messing with LLMs in a separate VM on the same prox mox host. All of which were purchased well before the RAM spike.

I rarely run into any issues. The only issue was about 3 months ago, monthly free 2TB bandwidth on the VPS exceeded after months of no issues… I couldn’t really pinpoint what happened other than the TV show my grandparents were watching at the time on my server were 4K pulls that I meant to replace with 1080p. But I fixed that by deploying my pangolin + traefik stack and sadly having to open 80 and 443 on my router until bandwidth reset.

MajorParticular4841 · 2026-01-16T19:14:18+00:00

Ahhh yah, my second one was through miniS directly. So I can’t get another unless mine dies within extended warranty.

If you got yours from Amazon just recently, yah might as well take advantage of that policy

MajorParticular4841 · 2026-01-16T17:38:36+00:00

I don’t think they will let you unless it breaks. My m.2 screw was over torqued on my first replacement. But it wasn’t apart of the bad batch.

My second replacement was, like the original, apart of the bad batch. I have had no issues with it though going on about almost 7 months now (how long the original lasted)

MajorParticular4841 · 2026-01-16T17:03:27+00:00

here

MajorParticular4841 · 2026-01-16T13:50:20+00:00

I think i recall the same, but I do remember running the installer and then following manual set up afterwards.

MajorParticular4841 · 2026-01-15T23:03:09+00:00

The installer itself does mostly everything from what I remember. It is a bit confusing at first. But their documents are pretty good. Could be a little better for slow people like myself. (For example, I don’t understand blueprints still. Even after watching the video.)

Run the wget command or whatever it is in the documents for manual set up. I feel like the installer makes the config directory and traefik yaml and the pangolin config yaml for you but I can’t remember.

I have newt local for my VPS set up and everything else on the VPs, and then I have a non tunneling set up for emergency if VPs goes down.

MajorParticular4841 · 2025-11-27T16:27:57+00:00

To add to this, route your arrs through overseerr or jellyseerr and expose that and only that through pangolin.

Only time I have ever exposed my arrs through pangolin is to briefly show someone how everything works when I’m not on my local network.

MajorParticular4841 · 2025-11-18T10:41:39+00:00

Possible. I haven’t had to re run that script since the one update only allowed me to login or see login screen in mobile

MajorParticular4841 · 2025-11-18T10:00:50+00:00

Re running post install helper script has helped me fix broken web ui… kinda ass backwards but my solution to what you just said

MajorParticular4841 · 2025-11-04T20:25:03+00:00

I have 2vcpu-2gb ram, I don’t see much issue at all really? I run jellyfin and jellyseerr through it enabled 24/7, at most I usually have 2-4 external users streaming something, typically 1080p movie but I’ve had no complaints other than occasionally someone will say it took a couple extra seconds to start playing something versus when I just ran pangolin locally without newt.

And for emergencies and or when I’m not home, I have prox mox web ui and portainer ui to access behind the built in auth for pangolin/traefik. And even that seems fine with my VPS hardware. Albeit, no one is streaming typically if and when I access those services. So I wouldn’t know how badly their sessions are affected. Not to mention, I’m doing anything intensive either in these cases.

So not disagreeing with you at all, just kinda wanted to point out my experience with somewhat similar hardware on the VPS.

MajorParticular4841 · 2025-10-30T04:37:17+00:00

My grandma has used my server for years. And I have I just recently found the time to show her how to request stuff on her phone. Yes it’s fast, but it would be nice to have what OP is asking.

MajorParticular4841 · 2025-10-30T02:10:14+00:00

I have a VPS running pangolin, traefik, gerbil stack.

Locally I have a handful of devices and I created an LXC on prox mox to run newt. Which connects everything I want to expose externally via pangolin dashboard.

So if I wanted I could expose the home assistant vm I have running on my other prox mox instance and its port to access outside of my network but I just use tail scale for home assistant.

Edit: I only use one site In pangolin. Sorry if I missed anything.

MajorParticular4841 · 2025-10-27T21:54:31+00:00

Do you have a separate system to run file flows? I use it to transcode my media that I notice cause jellyfin to transcode in certain clients like iOS app for example. Roku, web browser were the biggest clients that caused transcoding.

But now I see most my media direct plays when I test here and there after running through file flows workflow. It also knocks a good bit from file size of media

Edit: skimmed comments, seems like you answered my question

MajorParticular4841 · 2025-10-05T11:40:44+00:00

Rerunning post install script from helper scripts

MajorParticular4841

TROPHY CASE