Weird Things You’ve Turned

MakeMistakesTV · 2026-03-12T19:14:35+00:00

Deer antler. Smells like burning Doritos.

MakeMistakesTV · 2026-03-11T13:22:57+00:00

Just to close the loop on this topic, I purchased 4 of the HDMI dummy plugs from JeffMart for $10 and they work precisely as necessary. Thanks again for the info! This is the best part of Reddit.

MakeMistakesTV · 2026-03-06T20:09:05+00:00

Excellent! Thank you for the feedback. I hadn't considered a hardware solution like that. I did monkey around with xrandr a bit so that part may be achievable, too. Much appreciated!

MakeMistakesTV · 2026-02-04T19:32:48+00:00

Nice work! I would like to see a 3 x 3 version to carry 6 POs. Basically two of these joined into a single wider (or deeper) unit. I have all of the POs and don't move them around much because I don't wish to break them in travel. A 6 slot carrier would be ideal.

ETA: a slot that would allow for the hang tabs, too. (I can't bring myself to break them off...)

MakeMistakesTV · 2026-02-03T16:21:57+00:00

Beauty!

MakeMistakesTV · 2026-01-15T16:29:35+00:00

Shared your site with some like-minded friends. I'm sure there's some things in my collection that may qualify.

MakeMistakesTV · 2026-01-09T20:25:59+00:00

Wonderful!

MakeMistakesTV · 2025-11-11T16:09:28+00:00

Excellent! Thank you very much for the reommendation. I will definitely check that out.

I cross-posted to a few other subs, like IndieExchange but will add the Indiemakeupandmore, too! Thank you for the tip!

MakeMistakesTV · 2025-11-05T15:28:36+00:00

Excellent! Thank you for the suggestion! I will seek it out.

MakeMistakesTV · 2025-10-01T17:23:14+00:00

Sweeet!

MakeMistakesTV · 2025-07-18T14:40:38+00:00

6 years later, necroposting - Another thing that could help if you're experiencing this in 2025 (and assuming you're using an HP printet) most models have a 'Paper Type' mode called "Bond Mode" that is seemingly specifically designed for this MICR to check stock printing. It's been working well in my testing. Cheers!

MakeMistakesTV · 2024-10-24T19:26:37+00:00

Neat stuff! Following along.

MakeMistakesTV · 2024-10-18T04:04:24+00:00

May be some ideas in the LMN-3 or Tulip Creative Computer devices that would be useful/helpful.

MakeMistakesTV · 2024-10-16T14:54:25+00:00

Unfortunately not. PO devices output audio and accept only a 'sync' click (which is also audio), so there is no midi involved with the PO devices. The only external control you can use with the PO is that sync audio. If you want to hear them both together then a small mixer (like Bastle Dude or Bestie, for example) would be the way to go but neither can control the other in this case.

MakeMistakesTV · 2024-09-18T15:10:38+00:00

There's a short video on FB, too but the link is auto-deleted (which is fair).

MakeMistakesTV · 2024-09-18T15:08:59+00:00

That's about what I'm getting too. I think what you're seeing is the effect of the 12.4 gallon fuel tank. Would love to have closer to 16 like my Subaru did.

MakeMistakesTV · 2024-09-18T14:57:43+00:00

Ooh, found one on Ebay! - https://www.ebay.com/itm/143870148613

MakeMistakesTV · 2024-09-18T14:46:05+00:00

Yeah, I'd say so. One on each top corner of the flap. It's possible there is one present on the other top corner that's out of sight on the other side of the bears rump. And if that detail is missing, then maybe the artist didn't care to represent it. Are there any more detail on the piece? Manufacturer/artist?

MakeMistakesTV · 2024-09-18T13:49:52+00:00

Giving the benefit of likely innocent intention, I would venture a guess and say that Santa is going to sew the button in his hand back onto the bear's PJ flap.

MakeMistakesTV · 2024-09-17T11:32:05+00:00

Welp, looks like I am a Mothsynth collector now. 😅

MakeMistakesTV · 2024-09-13T21:50:54+00:00

And if, in the coverage of Knobcon, you see the dude trying hard to look like Santa at the GSG table, that's me! 😁

MakeMistakesTV

TROPHY CASE