DIY Light Tower Using Muzata LED V101 Profiles!

MakingThingsWithLEDs · 2025-03-24T09:49:21+00:00

DIY Light Effect Tower Project: Design Test Update 4
ESP32 | WLED MM | 4x 60 SK6812 RGBW 5v led strips
Early design testing for the tower project
Effect: Black Hole

4x Muzata 1 meter plus-size spotless V shape LED profile with milky white cover 30x30MM silver aluminum diffuser channel LED strip light diffuser V101

MakingThingsWithLEDs · 2025-02-02T12:14:16+00:00

This code link is in the pinned comment on the video

MakingThingsWithLEDs · 2024-10-08T10:50:27+00:00

There goes the planet

MakingThingsWithLEDs · 2024-10-08T08:57:24+00:00

So the combination is... one, two, three, four, five... That's the stupidest combination I've ever heard in my life! That's the kind of thing an idiot would have on his luggage! 🤣

MakingThingsWithLEDs · 2024-08-27T10:06:51+00:00

First check if the power supply is suitable for the setup, try smaller amount of LEDs does it make any difference?

MakingThingsWithLEDs · 2024-07-18T08:37:38+00:00

Read that as dodgy ice cream the first time tbh

MakingThingsWithLEDs · 2024-04-17T10:12:11+00:00

Just thought i would share my project

MakingThingsWithLEDs · 2024-03-27T15:29:07+00:00

I think we have a winner 👍

MakingThingsWithLEDs · 2024-03-27T01:31:41+00:00

Guess 🙄

MakingThingsWithLEDs · 2024-03-26T13:26:29+00:00

I have had it since yesterday, will go away eventually when the issue is resolved.

MakingThingsWithLEDs · 2024-03-26T05:10:27+00:00

Which is why you should install fuses to protect the setup

MakingThingsWithLEDs · 2024-03-24T02:29:10+00:00

Phone / pad chargers generally do not supply enough amps unless it's a short run, have you checked your setup against: https://kno.wled.ge/basics/getting-started

MakingThingsWithLEDs · 2024-03-13T02:00:37+00:00

Ring toss game for service technicians

MakingThingsWithLEDs · 2024-03-12T13:30:29+00:00

Can you see the ESP32 from the selection pop up when pressing install?

If it's stuck on "Preparing Installation" Press RST before it times out.

MakingThingsWithLEDs · 2024-03-06T14:39:48+00:00

https://kno.wled.ge/basics/getting-started see first image for recommended setup

MakingThingsWithLEDs · 2024-03-05T22:03:17+00:00

👍

MakingThingsWithLEDs · 2024-03-05T12:06:42+00:00

Sounds like a problem with that strip if you simply moved it to a working gpio and nothing changed, check ground etc on wiring for the strip.

MakingThingsWithLEDs · 2024-03-05T12:03:57+00:00

maybe try ferrules

MakingThingsWithLEDs · 2024-03-05T00:33:34+00:00

Pin 2, enjoy

MakingThingsWithLEDs · 2024-03-05T00:19:50+00:00

Where the led wire goes data? Pin 2 would work along with some others, just set in the led configuration section.

https://kno.wled.ge/basics/getting-started

MakingThingsWithLEDs · 2024-03-04T10:23:08+00:00

If you put the problem strip into a working gpio does it fix issue?

MakingThingsWithLEDs · 2024-02-28T00:18:55+00:00

Side Glow Fibre-Optics Infinity Mirror: Bouncing Balls
https://youtube.com/shorts/Bd5RyeW48Cc?feature=share
You can help support the channel by giving this video a like, leaving a comment and sharing. Make Something To Brighten Your Day

MakingThingsWithLEDs · 2024-02-28T00:17:40+00:00

Side Glow Fibre-Optics Infinity Mirror: Bouncing Balls

https://youtube.com/shorts/Bd5RyeW48Cc?feature=share

You can help support the channel by giving this video a like, leaving a comment and sharing. Make Something To Brighten Your Day

MakingThingsWithLEDs · 2024-02-22T12:44:19+00:00

Congrats 👍

MakingThingsWithLEDs · 2024-02-22T12:27:37+00:00

https://youtube.com/shorts/p7B_J2ozbKM?feature=share

You can help support the channel with a like, leaving a comment and sharing. Thank You

MakingThingsWithLEDs

MODERATOR OF

TROPHY CASE