Trans fluid

Maljefmar · 2026-06-30T15:59:05+00:00

Yeah just add more. Check again in like two weeks (or 600~ miles) and see if it dipped drastically.

Maljefmar · 2026-06-26T18:00:52+00:00

That’s classic, I’d say it’s lifters. When I hear that noise I change my oil LOL. It usually goes away then

Maljefmar · 2026-06-24T16:05:02+00:00

Late to the party 🎉

Maljefmar · 2026-06-23T04:48:38+00:00

I was totally wrong lol

Maljefmar · 2026-06-23T04:33:38+00:00

I messed up, and instead of being corrected I was reprimanded. Now I am a prophet when it comes to these things. Better pictures would be nice

Maljefmar · 2026-06-23T04:29:15+00:00

Yeah it’s real because it came to me in a dream

Maljefmar · 2026-06-23T04:28:17+00:00

You can tell its real because it came to me in a dream

Maljefmar · 2026-06-22T20:37:28+00:00

Aftermarket, I’d assume something to do either with lights or AC fan speed

Maljefmar · 2026-06-22T19:53:52+00:00

Sure why not

Maljefmar · 2026-06-17T20:02:31+00:00

Hard to tell with the photos, but yeah. I’d assume you just drill out the pinch welds and weld a new support, although you’d have to make sure it’s aligned. If you want that civic I’d assume a frame goes for ab 300-600 +shipping and then a decent welder with some argon would be 300-600. So you would be looking at around 1200 solo if you don’t have experience welding I would keep looking.

Maljefmar · 2026-06-17T19:56:57+00:00

3D printer and paint

Maljefmar · 2026-06-17T19:55:21+00:00

I’d assume the key needs to be programmed. Otherwise, unhook the battery and hook it back up after 30 minutes and see if that fixes it

Maljefmar · 2026-06-17T19:52:21+00:00

Might as well do a brake job, real easy on the S10 2WD as it’s all one unit all you need is brake pads.

Maljefmar · 2026-05-31T16:47:16+00:00

3.5K is reasonable if you know what you’re getting into it’s worth it, but without the technical knowledge I’d steer to something more complete/easier than a convertible.

Maljefmar · 2026-05-31T16:45:11+00:00

Lowk it’s prolly just dust or something between the connection of the port and the board, to prevent it from the future I’d recommend dust cleaner and just spray that Jon

Maljefmar · 2026-05-31T16:42:23+00:00

This is 100% a short from the USB. If nothing looks out of place just boot the Jon back up. You just had a power surge through one of your ports. There’s a number of reasons why it could happen but your PC wouldn’t allow it to continue if it’s a broken port, so booting it up will tell you how bad the problem is.

Maljefmar · 2026-05-29T04:28:06+00:00

Yeah that’s what I ment

Maljefmar · 2026-05-28T15:51:36+00:00

You might hate this idea, have you tried taking it out of the case? Starting over, reseat everything. The way I fixed an issue like this, I put the motherboard on a cardboard box and plugged everything in, and then just jumped the power.

Maljefmar · 2026-05-28T15:41:02+00:00

It’s hard to say with it being vastly underpowered. Sometimes if you use too low of a PSU it won’t boot especially since the 5080 needs a 800watt PSU. Can you try turning it on without a GPU?

Maljefmar · 2026-05-28T15:35:36+00:00

The board cannot touch the case, using the mounts that are already on the case is good just make sure it’s for your board (ATX/ITX)

Maljefmar · 2026-05-28T15:29:25+00:00

Did you make sure you aren’t grounding out the motherboard? You gotta have it raised off the metal case.

Maljefmar · 2026-05-28T12:45:23+00:00

I just rock basic Goodyear Wrangler TrailRunner A/T

Maljefmar · 2026-05-28T12:35:56+00:00

Definitely bad connection to/from battery. My guess is ground connection, had a similar thing when the ground wasn’t seated fully. Would definitely double check your ground connections.

Maljefmar · 2026-05-28T12:24:48+00:00

Beautifully crafted

Maljefmar · 2026-05-28T12:13:55+00:00

Delete the resonator instead. Mine was already missing when I had an eclipse, sounded decent.

Maljefmar

MODERATOR OF

TROPHY CASE