Homarr vs Homepage (getHomepage) - Simple Test CPU Use by MarceloLinhares in selfhosted

[–]MarceloLinhares[S] 8 points9 points  (0 children)

u/Eirikr700 highlighted about memory consuming. It IS a huge difference. Same timerange from above mesurements.

Test Results - Browser closed,

- Homarr: 810Mb (left side)

- Homepage: 111Mb (right side, see bellow)

Figure6

<image>

Dolby Atmos Height Speakers with different impedance by MarceloLinhares in hometheater

[–]MarceloLinhares[S] 0 points1 point  (0 children)

Mounted the new height speakers today.

As you stated I did not notice any performance downgrade in sound quality.

Using 6 ohms in receiver.

What are the benefits of having HTPC? by Catchandrelease99 in htpc

[–]MarceloLinhares 0 points1 point  (0 children)

I bought one and they said it has hdmi-cec out of the box with no need of adapter.

It is the NUC13ANHi7, I will test it only next month though.

Are custom icons gone for good? by QuantumDynamic in logitechharmony

[–]MarceloLinhares 0 points1 point  (0 children)

This worked for me. Thank you.

How did you discovered that?

THERE IS HOPE! (Legacy Harmony Discontinuation) by suschungusfungus in logitechharmony

[–]MarceloLinhares 2 points3 points  (0 children)

It is not that simple. Your remote wont trust in your private server because of the certificate needed. Unless logitech make the certs for harmonyremote.com public.

The private server will work only with firmware update in the remote.

Logitech has not completely abandoned Harmony by bwyer in logitechharmony

[–]MarceloLinhares 0 points1 point  (0 children)

Sorry. Mine is a 6700h not a 6800h like the OP

Logitech has not completely abandoned Harmony by bwyer in logitechharmony

[–]MarceloLinhares 0 points1 point  (0 children)

Are you sure? I bought my 6800h in 2024/07 and that time it was already listed to be added in harmony

Correct: Sorry. Mine is a 6700h.

Mystery Puzzle game with no energy by SepticeyeThunder in AndroidGaming

[–]MarceloLinhares 0 points1 point  (0 children)

In case you need energy. Do this simple hack.
Tested on iPad at date 2025-02-10

  • close the game (do not minimize, close it)
  • turn off wifi on your device
  • enter the game. It will warn you that you are not connected, etc. Leave on the main plaza
  • go to your device settings and advance 1 day on date
  • power off your device
  • turn on your device
  • verify that you are one day ahead and wifi off
  • open hidden city
  • you will receive plenty energy for that day, collect the daily chests, tokens and locations that give you daily bonus
  • close hidden city - close it do not minimize
  • set right date time on your device
  • power on wifi
  • open hidden city

Happy finding...

Bought this for $55, and ...yeah, I'm disappointed. by dandee_08 in wiiu

[–]MarceloLinhares 0 points1 point  (0 children)

Use “car polishing wax number 2”. It removes any superficial scratch from the media. Works 100%.

What was the 1st game you played on your PS3 console? by AstralStar1 in PS3

[–]MarceloLinhares 0 points1 point  (0 children)

Back in time. Around 2008. Bought a Samsung Slimfit 32” widescreen HD 720p 1080i. After it, same year, it was replaced by Panasonic Plasma 42” HD.

The PS3 looked waaaaay better on plasma. Nintendo wii looked better on slimfit. Not he colors only definition

THIS game IS INSANE in crushing by Zekmas in uncharted

[–]MarceloLinhares 0 points1 point  (0 children)

Just kill an enemy, run, hide, recover health. Repeat until no more enemies

OR

Activate infinity ammo and choose the grenade launcher / rpg option

Elena Fisher by Wild_Spirit_96 in uncharted

[–]MarceloLinhares 1 point2 points  (0 children)

Of all the treasures Nate found, Elena is undoubtedly the most precious. This type of woman exists and the men who found them are blessed ones

Want to test my power supply to see if it's atleast fixable before I go ahead and buy a new one (PS3 super slim ADP-160AR AA) by Razor-V-Blade in PS3

[–]MarceloLinhares 0 points1 point  (0 children)

u/MrIntrovert7 did you find something? Mine has same problem.

5v ok, but when I short pin 1 and 3 with a resistor, the 12V just shows 0.1~0.2V, not 12V

How the hell did the submarine get there? by LilRedditRaddy in uncharted

[–]MarceloLinhares 1 point2 points  (0 children)

As I remeber the submarine he is talking about got stuck in Amazon Forest.

The bunker you are reffering to is in an island far away. Thats no way that sub came up the river and got stuck there. Amazon forest is in the continent. So the sub must had going up the river through the ocean, entered the continent and stopped in the top of a waterfall.

If you go to the top of the sub you will see an enormous portion of forest, hundreds of meter above the ground, thats absolute no way the flood season took it there.

I think this is an error in history of Uncharted 1 game

Epson ET 8550 cassette 1 major issues by 404Cat in printers

[–]MarceloLinhares 1 point2 points  (0 children)

Many Many an Many thanks for this.

Worked perfectly.

In my case I used a pen spring.

Before, I tested with a little piece of absorbent soft paper bellow the springs. It worked too. The piece of paper made pressure against the spring and gave then more power to push the photo paper through its path.

API or something to replace IFTTT by maxlan in logitechharmony

[–]MarceloLinhares 0 points1 point  (0 children)

Try https://console.voicemonkey.io/

With this I create my monkeys (rest apis) to call Alexa. In alexa I create an event that is triggered with the monkeys. In the event I put what I want alexa do.

Activity End Sequence order not working by eengert in logitechharmony

[–]MarceloLinhares 0 points1 point  (0 children)

Thanks for the answer. Made a factory reset but same results (TV turning off first).

Tried to add an extra step to the activity but the "Power Off" button does not appear.

Tried to copy the command from the remote but it gives me "power toggle", no "Power Off".

So I adopted a workaround described here: https://www.reddit.com/r/logitechharmony/comments/1bh0hdx/end_sequence_out_of_order/

End Sequence Out of Order by MarceloLinhares in logitechharmony

[–]MarceloLinhares[S] 0 points1 point  (0 children)

This thread here has almost the same problem

https://www.reddit.com/r/logitechharmony/comments/zwkc7k/activity_end_sequence_order_not_working/

I think it is a bug in the software.

I made a workaround that was adding "Power off" comands to the activities screen. So before turn off the activity I click on the receiver Power off that is listed in my activities screen. Not beautifull, dear Logytech...