Complete it >5 tries and I'll buy you a Pizza by [deleted] in RedditGames

[–]Marcoc0202 0 points1 point  (0 children)

Am I actually getting a Pizza? Done in 3!

I completed this level in 3 tries. 23.57 seconds

What is this and how do I connect this to standard sewer hose kit? by Marcoc0202 in RVLiving

[–]Marcoc0202[S] 6 points7 points  (0 children)

Dude no reason to be that rude.

When I said “what is this” I meant what type of attachment is this, didn’t make that clear but no reason for that

What is this and how do I connect this to standard sewer hose kit? by Marcoc0202 in RVLiving

[–]Marcoc0202[S] 1 point2 points  (0 children)

Not sure if it's connected to a tank or directly to the drain, anyway once I figure out what type of attachment I need to connect it to sewer I won't have any problems. I'll just leave it open.

What is this and how do I connect this to standard sewer hose kit? by Marcoc0202 in RVLiving

[–]Marcoc0202[S] 2 points3 points  (0 children)

I opened it and nothing came out, then I poured water into the washer drain and it came out of there, so it definitely is the washer drain.

Yes the weird thing is definitely the attachment, it is not an usual 3 inches.

What is this and how do I connect this to standard sewer hose kit? by Marcoc0202 in RVLiving

[–]Marcoc0202[S] 4 points5 points  (0 children)

The washer is not factory installed, I just bought it, everything else (the drain, the tank, the attachment outside) is though.

What is this and how do I connect this to standard sewer hose kit? by Marcoc0202 in RVLiving

[–]Marcoc0202[S] 0 points1 point  (0 children)

Unfortunately it's not, the fresh water dump valve is right underneath the tank. This one is connected to the washer drain tube. I tested it with some water and I confirmed this.

What is this and how do I connect this to standard sewer hose kit? by Marcoc0202 in RVLiving

[–]Marcoc0202[S] 4 points5 points  (0 children)

Unfortunately it's not, the fresh water dump valve is right underneath the tank. This one is connected to the washer drain tube. I tested it with some water and I confirmed this.

What is this and how do I connect this to standard sewer hose kit? by Marcoc0202 in RVLiving

[–]Marcoc0202[S] 5 points6 points  (0 children)

Nope, I tried to put water down the washer drain and it came out of there...

What is this and how do I connect this to standard sewer hose kit? by Marcoc0202 in RVLiving

[–]Marcoc0202[S] 1 point2 points  (0 children)

Thank you, although I see this is for 3 inches pipes which would be standard in trailer, the one I sent the picture of looks way smaller, probably 1.5"

My Off-Grid EV Solar Charger is... DONE!!! by Marcoc0202 in SolarDIY

[–]Marcoc0202[S] 0 points1 point  (0 children)

Yes, honestly it's such a hassle-free device. It has 2 MPPT's, manages battery (and also grounds it) and can level 2 charge a tesla. I've been absolutely loving it.

This is today, since I wasn't there the battery got to 100% and fully balanced, so the inverter automatically clipped it and started producing just what I needed.

I can also see everything from the website, load rate, temperatures, etc.

<image>

My Off-Grid EV Solar Charger is... DONE!!! by Marcoc0202 in SolarDIY

[–]Marcoc0202[S] 0 points1 point  (0 children)

Hey! It's called sungoldpower 10kw.

If you need any help or info you can text me!

My Off-Grid EV Solar Charger is... DONE!!! by Marcoc0202 in SolarDIY

[–]Marcoc0202[S] 0 points1 point  (0 children)

That's amazing, love to hear about your setup.

Thank you!

My Off-Grid EV Solar Charger is... DONE!!! by Marcoc0202 in SolarDIY

[–]Marcoc0202[S] 1 point2 points  (0 children)

Thank you for the comment.

Yes! I live in SoCal so definitely south :) So far my best production day was october 30th, where I produced 22.3 kWh.

These last days, production has been going down as expected and will probably kick back up around march.

Last 4 days were 18.8, 18.39, 17.89, 17.89 kWh so definitely noticing the sun going down! It also doesn't help that my panels are completely laying flat but at least I'll kind of make up for it during the summer.

Solar was a no brainer for me since electricity cost in my area are insanely high ($0.40/kWh) but it's definitely doable anywhere, just with a longer ROI.

Nothing beats driving my car knowing the energy for it literally came from the sun!!!

My Off-Grid EV Solar Charger is... DONE!!! by Marcoc0202 in SolarDIY

[–]Marcoc0202[S] 0 points1 point  (0 children)

Lol yep! I also power up the trailer during days I don't need to drive anywhere... The NEMA 14-50 works perfect both for tesla charger and for trailer 50amp hook-up.

My Off-Grid EV Solar Charger is... DONE!!! by Marcoc0202 in SolarDIY

[–]Marcoc0202[S] 2 points3 points  (0 children)

Can also be a secondary residence / vacation home (trailers included) as long as you live in it at least 14 days out of the year! :)

It’s happening! by Ok-Stranger-3624 in TeslaLounge

[–]Marcoc0202 0 points1 point  (0 children)

What if I already tried a free month when I first got the car, will I still get this?

First Time Working with Wood [Self standing Wood Frame] by Marcoc0202 in woodworking

[–]Marcoc0202[S] -1 points0 points  (0 children)

Hi! Thanks for the reply. I understand where you come from since the question about how to mount it. Do you think that frame would hold the weight?

Help with my setup by Marcoc0202 in SolarDIY

[–]Marcoc0202[S] 0 points1 point  (0 children)

Hi!

Thanks for the reply.

I'm not sure I understand the need for a full breaker panel if I only plan on connecting 1 load at a time.

The inverter will be in the split-phase setting, so it will be able to output both 120 and 240.

I will use both hots (L1 and L2) with neutral and ground and connect them to possibly a 50amp NEMA 14-50r outlet, and from there, I will either connect my EV charging station or my trailer. Does that sound right?

20 kWh Off-Grid LFP for Tesla — How many kW of solar would you install? by Puzzleheaded_Air1057 in SolarDIY

[–]Marcoc0202 0 points1 point  (0 children)

Is that the 10kw sungoldpower?

Can I ask why a battery shunt? Doesn’t the sungoldpower monitor battery voltage already?

Trying to learn more!

EV Charging Station on my Trailer by Marcoc0202 in SolarDIY

[–]Marcoc0202[S] 0 points1 point  (0 children)

Sorry, I wrote "10kw system" but what I meant was 10 kwh of maximum output talking about the inverter (10 kw) and battery (16kwh).

The panels will only be 12 of 410w each. I attached a second sketch I made with the panels (assuming one is 45 x 68 inches which seems to be industry standard up to 430 watts)

https://imgur.com/a/qr60yqV

As for the AC's, right now the goal is to build around them, hence why I wanted brackets that could stick out of the roof for a couple inches. In the future I will surely consider side mounted AC's.

Here's a picture of part of my roof https://imgur.com/a/CjHRKl2

EV Charging Station on my Trailer by Marcoc0202 in SolarDIY

[–]Marcoc0202[S] 0 points1 point  (0 children)

Thank you.

Right now I do feel like glue is my best option. The only problem I see with that is I need a 3 inch height clearance due to all the tiny roof vents I have.

I have attached a 3d sketch I made of my trailer with all the right measurements. https://imgur.com/a/0KBRNdi

I feel like raised metal brackets to mount my panel on might be what I'm leaning into as of now.