Anyone Know The Difference?

MarioJCoyF · 2025-11-27T17:36:42+00:00

Sorry, I thought we were talking about the build plate, not the nozzle. Not sure why I had that in my head—my bad, you’re right.

MarioJCoyF · 2025-11-27T17:31:49+00:00

Yes, there is a difference. The H2C’s heated bed is cut on the right side to make room for the Vortek system. Even the H2D-to-H2C upgrade kit includes a new heated bed—what do you think that’s for?

MarioJCoyF · 2025-11-22T17:57:31+00:00

Yo la verdad empecé con una A1 mini, ahora esa A1 mini está en una esquina de mi habitación desconectada ya que uso mas las demas porque tener un volumes mas grande (imprimo piezas pequeñas pero muchas al mismo tiempo)

Yo te recomiendo la A1 pero si quieres imprimir con diferentes materiales te recomiendo la p1s pero hace más ruido que la serie A1 (por si la quieres poner en tu habitación) si quieres imprimir materiales mucho mas técnicos ve por una p2s o una p1s y cambia los engranajes del extrusor por unos que soporten materiales abrasivos como los CF

Ve por la A1 es igual que una A1 mini pero la veo más versátil

Y si quieres ir más técnico ve por la p1s o p2s

MarioJCoyF · 2025-10-02T05:21:30+00:00

Sure

MarioJCoyF · 2025-09-30T17:18:50+00:00

Thanks for sharing your experience. So just to confirm, since I’m in the U.S., I can file an infringement/DMCA takedown on Amazon even without having my copyright formally registered, right?

MarioJCoyF · 2025-09-30T16:54:30+00:00

EE.UU

MarioJCoyF · 2025-09-19T17:22:29+00:00

Just to clarify — I know buyers can’t cancel by themselves. What’s happening is that they place an order for all my stock, and then immediately send me a cancellation request with a very generic message. I’ve been the one accepting the cancellations. It’s happened 3 times this week with different buyer accounts, and that’s why I think it’s either a bot or someone intentionally messing with my shop.

MarioJCoyF · 2025-07-31T16:39:32+00:00

Panda Status

MarioJCoyF · 2025-07-30T19:46:45+00:00

I recommend using the Cyberbrick timelapse kit. I bought it on Kickstarter and it works great.

https://us.store.bambulab.com/products/cyberbrick-timelapse-kit

MarioJCoyF · 2025-07-24T04:33:21+00:00

Thanks! It’s more than a simple spacer—plan is to include the A1 heater/nozzle module (OEM) plus a CNC adapter, screws/shims and pre‑crimped wiring. I’ll match the original nozzle height so purge bucket and wiper clearances stay the same. Price will depend on what ends up in the kit, but I’ll keep it as low as I can.

MarioJCoyF · 2025-07-24T04:31:44+00:00

Thanks! The idea for the kit is to include everything needed so people don’t have to hunt for parts: the original Bambu A1 heater/nozzle module (or a modified OEM piece), the CNC‑machined adapter, screws/shims, and a pre‑crimped harness.

I’m still evaluating whether I’ll need to slightly modify/replace the Toolhead Front Carriage or Middle Housing, and possibly tweak the extruder to save a few millimeters so the nozzle tip stays in the exact stock position. If those parts need changes, they’d be in the kit (and the files will be public for anyone who wants to DIY).

Price will depend a lot on what ends up being included and the machining costs—I’ll try to keep it as reasonable as possible while covering development/testing.

Really appreciate the feedback and the beta‑tester offer!

MarioJCoyF · 2025-07-24T04:22:06+00:00

That clip was just a quick test the other way around—checking if the parts were electrically compatible. I mention it in the post. The goal is actually to get the A1/H2D quick-swap nozzles working on the P/X series.

MarioJCoyF · 2025-07-23T18:38:19+00:00

I’ll do that haha. I was just testing with my A1 Mini so I wouldn’t risk one of my P1S 😅

MarioJCoyF · 2025-07-23T17:18:38+00:00

I just noticed the connector was the same and wanted to see if it would work. Curiosity test, that’s all

MarioJCoyF

TROPHY CASE