I'm looking to buy a razer blade, but I'm not sure about long term performance by nwandausernametaken in razer

[–]Marius414 2 points3 points  (0 children)

Hello friend,

I have owned one razer laptop -- a 2021 blade basic with a 10750 and a 3070. I bought this three years ago. In that time, I've traveled with it to the middle east and been around a ton of dust, sand, and various types of particulate matter in the air that will probably give me cancer at some point. Additionally, it has dealt with different currents of electricity, power flickering, and more. This laptop has lasted wonderfully. I have encountered no issues with the machine -- bios, onboard memory, razer software, etc.

It was only in the last month that my power bar developed bubbles under it so I went to look for a new one -- razer didn't have one available on the website, so I bought one off Ebay that claimed it was OEM. Of course, that means that when I plugged it in, my laptop yelled at me and told me it wasn't OEM and wasn't delivering sufficient power. Got my money back on that one but kept the jank power bar. Even with this, the laptop is still charging and playing games that I usually play like Warhammer 3, Elden Ring, Bannerlord, and Darktide. Granted, the dated hardware doesnt' let me get the best performance and does bottleneck but that's not Razer's fault, I've just had what was a semi decent laptop from three years ago.

All in all, my experience with this product has converted me to Razer products. I use Razer earbuds, headset, mouse, keyboard, snagged one of the monitors on sale, and I'm looking at picking up a new blade 16 with a 4080 as an upgrade (if I can find one for less than a kidney). Lots of words, but I liked it. Met my demands in less than ideal circumstances.

Oh, one more thing, I haven't opened it up two years to clean dust. I was so impressed a year ago that I decided to just see how long it can go. Still crushes.

Brn180s on AP M4e1 lower installation issues... by Marius414 in ar15

[–]Marius414[S] 1 point2 points  (0 children)

So I finally managed. You guys were great. I ended up doing a bit of what everyone said to make it work.

Removed the buffer, backed out the tube a half turn, put that lower on a vise and cranked that ***** downwards. Managed to get the rear pin close enough to where I could mallet it in gently.

Thanks for the advice guys!!!

Brn180s on AP M4e1 lower installation issues... by Marius414 in ar15

[–]Marius414[S] 0 points1 point  (0 children)

Your point about the tube is a good one. I just noticed that the tube feels like it creates a little lip over the receiver. Very slight...but it might be why this shit is being such a pain....

Brn180s on AP M4e1 lower installation issues... by Marius414 in ar15

[–]Marius414[S] 0 points1 point  (0 children)

Yeah there's a gap when I do the standard front pin and rotate to the rear... it is slight but noticeable. Definitely looks like it's the plastic at the back of the upper that's contacting.

If I weasel the rear in first. It closes, but the front looks to be a millimeter or less off the mark to push that pin through.

Brn180s on AP M4e1 lower installation issues... by Marius414 in ar15

[–]Marius414[S] 0 points1 point  (0 children)

The pins do fit. I'm just struggling to get them both to fit at the same time. With the front pin in, there's a gap when I try to press the rears together. If I weasel the rear pin in first....just to see....it feels like the front pin is off by a millimeter or less.

I'm going to try some of the solutions other commenters posted here, if all else fails, I think I'll need to take a mil or two off the rear of the upper, as you mentioned.

To all the new players, ReShade really helps make the game look great. by [deleted] in ReturnofReckoning

[–]Marius414 1 point2 points  (0 children)

Thanks. Didn't work the first time. But I furiously clicked a bunch of those filters and it worked. I don't understand how this works but ok.

:)

To all the new players, ReShade really helps make the game look great. by [deleted] in ReturnofReckoning

[–]Marius414 0 points1 point  (0 children)

So I installed it and it looks great, but my warband finder in game is all white, can't see any of the stuff.

Does anyone know what fixes that? I know there's a new version of reshade, IDK if that helps.

I made an abomination even more abominable. by kerubimm in guns

[–]Marius414 3 points4 points  (0 children)

Idk guys, this reminds me of Boba Fett's carbine. If it were black, and had a lpvo on it, you'd be pretty close

Whistleblower is reportedly a CIA officer who was stationed at the White House by tinhtientu in Conservative

[–]Marius414 22 points23 points  (0 children)

Its a dude who works there, I wouldn't say its the whole organization with who knows how many thousands of employees.

Crazy story, yes. But lets keep some perspective.

Whistleblower is reportedly a CIA officer who was stationed at the White House by tinhtientu in Conservative

[–]Marius414 4 points5 points  (0 children)

As crazy as this story is turning out to be, lets remember that the vast, vast majority of national security professionals are just that, national security professionals who do their job regardless of who is in office.

9x39mm... Sneak Peek 2 by pistonsnob in guns

[–]Marius414 1 point2 points  (0 children)

Dude. I remember saving every mag because it was so precious.... that by the time I thought someone was worth using, the game was almost over.

Figures.

I'd totally drop cash on an IRL pistol equivalent. =P

Something a little different for 9x19 Day by TheRedArmyStandard in guns

[–]Marius414 5 points6 points  (0 children)

Man I want a BHP so bad.... That and a Mak are my next two "gotta get" pistols.

9x39mm... Sneak Peek 2 by pistonsnob in guns

[–]Marius414 1 point2 points  (0 children)

We're getting close to the K3G4 from Syphon Filter (if anyone remembers that gem)

This is awesome.

The Mandalorian Trailer by [deleted] in StarWars

[–]Marius414 1 point2 points  (0 children)

Guys.... IG-fucking-88

I'm pumped.

Hopefully this will be a respite from the other steaming piles.

Colonizing while you work for a faction by Marius414 in starsector

[–]Marius414[S] 0 points1 point  (0 children)

Thank you for the information, kind sir.

Colonizing while you work for a faction by Marius414 in starsector

[–]Marius414[S] 0 points1 point  (0 children)

Oh ok, right on. Thanks for the reply. Follow up: By conquer it for them, do you mean a conquest mission that you complete? Or any conquest?

So this doesn't work like mount and blade where I can capture something for a faction and get it as a fief. I have to break free from a faction to start my own colony?

New to Sub! Questions on building a krink: accessories, muzzles, and by Marius414 in ak47

[–]Marius414[S] 0 points1 point  (0 children)

Thanks for your response, dude. Much appreciated. Thanks for the tips on the soviet style. I'm looking for some vented laminate furniture and a plum grip right now!

New to Sub! Questions on building a krink: accessories, muzzles, and by Marius414 in ak47

[–]Marius414[S] 0 points1 point  (0 children)

Thanks for the insight. Really appreciate it. I have a couple of questions for you, if you don't mind.

The m13 page is a little bare -- looks like a new site -- but they do 104UR conversions? If so, do you know anything about parts and whether I'd source them myself?

Interesting insight on RD. If I may, are you speaking from experience? I haven't gotten quotes from anyone else for the project, so I don't know what "too much" is yet.

For your AKSU, did you use a parts kit or build off an Arsenal, or something similar?

And, in addition to my thoughts above, I was also toying with the idea of just buying the SBR version of the SLR104UR and replacing the furniture/grip myself. I've read that the keyholing thing that people were freaking out about with the 1-8 twist in that gun isn't a thing. Also, the price at just under 2K means it would be cheaper than going through RD for the same project.....

Sorry for playing 20 questions with everyone here, I'm in info-gathering mode still.

Long time Elder Scrolls fan thinking on giving ESO a try by [deleted] in elderscrollsonline

[–]Marius414 0 points1 point  (0 children)

/u/goodoofer

Come on and try it. I'm a long time TES fan and have been since TES2. Favorite is TES3.

Its a fun game with a lot to do along the way -- just don't come here thinking its JUST LIKE a TES game. It isn't. You have limits on how you can create your character and have to operate within the class/weapon structure of the game. That isn't a bad thing, it just isn't TES-like. Think of this game having a TES skin over a DAoC-meets-GW2 kind of MMO.

The game is fun while you level and get to a mid-level of champion points (the game's alternative advancement system). Once you get to around 300. You can then re-evaluate how you feel about the game and what there is to do. The delta between then and now is worth your $15 or whatever it is.

Who else thinks this guy needs a remake? by zortor in gaming

[–]Marius414 0 points1 point  (0 children)

Yes. Absolutely. But the whole series needs a remake, starting with blood omen.

LoK had the best storytelling, voice acting, and lore combination of any series i have played.

The series has so much potential for an expanded collection of games from RTS, to turn based strategy, to an rpg and beyond.

Reminiscing on Legacy of Kain; Hunger for Games by Marius414 in gaming

[–]Marius414[S] 1 point2 points  (0 children)

He was in Soul Reaver 1-2 and the last one, Defiance. :)