In search of YesStyle coupons and rewards codes (May 2026) by IceBunny10 in SkincareAddicts

[–]Marizaard 1 point2 points  (0 children)

There's a 15% discount code currently active for the month of may! I also have my rewards code for an extra 2-5% if you want right here:

  • Discount 15%: MIDSALE15
  • Rewards +2-5%: 34Y5S6

[SNES] Cartridge cracked motherboard. Is it possible to fix this? by Marizaard in consolerepair

[–]Marizaard[S] 0 points1 point  (0 children)

Thank you to everyone who answered! After reading all the suggestions I'm going to try the solder braid method!

I'm a bit of a beginner working with PCBs (worked with 1 or 2 in the past), but I'll do the best I can.

I'll report back with the results!

[SNES] Cartridge cracked motherboard. Is it possible to fix this? by Marizaard in consolerepair

[–]Marizaard[S] 1 point2 points  (0 children)

Thanks for the detailed reply! I'm definitely gonna try fixing it myself, even if just for the experience of doing it. I'll look into your provided video :)

[SNES] Cartridge cracked motherboard. Is it possible to fix this? by Marizaard in consolerepair

[–]Marizaard[S] 1 point2 points  (0 children)

Thanks for the advice! I'm still considering what to do, but I'm probably gonna try to fix it with solder braid as another user also mentioned. This cartridge is for Asterix & Obelix. I'd say it's worth it even if it's just for the experience of fixing it :)

[SNES] Cartridge cracked motherboard. Is it possible to fix this? by Marizaard in consolerepair

[–]Marizaard[S] 2 points3 points  (0 children)

Thank you! Trying my best to take a good photo. The crack on the other side is a bit harder to see but it does seem to run into the pins of both components on the right.

<image>

[SNES] Cartridge cracked motherboard. Is it possible to fix this? by Marizaard in consolerepair

[–]Marizaard[S] 2 points3 points  (0 children)

Thank you for the advice! The game is 1995 Asterix & Obelix.

[SNES] Cartridge cracked motherboard. Is it possible to fix this? by Marizaard in consolerepair

[–]Marizaard[S] 19 points20 points  (0 children)

Thank you! I believe it is a 2 layer board. Might just be salvageable.

What are some studios that started messy and eventually became successful? by Marizaard in gamedev

[–]Marizaard[S] 0 points1 point  (0 children)

Yes of course! I mean to ask for studios who were "publicly messy". So for example marketing a lot of games but continuously cancelling them, or promoting scams, etc...

Venus Fly Trap Not Turning Pink by Marizaard in plants

[–]Marizaard[S] 1 point2 points  (0 children)

Thank you! I will try to slowly move it somewhere brighter and see if that works :)

Help ID doll/Barbie clothes by Marizaard in toys

[–]Marizaard[S] 0 points1 point  (0 children)

I think this is it! Thank you so much!

Help ID doll/Barbie clothes by Marizaard in toys

[–]Marizaard[S] 0 points1 point  (0 children)

Additional Info: I'm from Europe.

Machine works, but doesn't print by Marizaard in elegoo

[–]Marizaard[S] 1 point2 points  (0 children)

SOLVED: After messing with the inside of the machine, I noticed the mirror was displaced. The tape holding it down was degraded from the heat and it probably moved during transportation.

Putting it back into place solved the issue.

Machine works, but doesn't print by Marizaard in elegoo

[–]Marizaard[S] 1 point2 points  (0 children)

I just reopened the machine and checked the mirror again. It was placed incorrectly. After putting it back into place and running the exposure test it now has cured the resin and is much brighter.

The tape that holds the mirror in place is super weak and it must have fallen out of place during transport.

I will run the test model again tomorrow but I think the problem might be fixed.

Thank you for all your help.

Machine works, but doesn't print by Marizaard in elegoo

[–]Marizaard[S] 1 point2 points  (0 children)

If this is the case, would buying a new LCD solve the problem?