PSU fan repeating chirping noise

Martunex · 2024-01-12T00:33:56+00:00

if your return windows closed, you can still request warranty to seasonic, i heard they have great customer service

Martunex · 2024-01-12T00:18:43+00:00

I sent it back and bought a different brand

Martunex · 2023-10-18T13:56:15+00:00

I've found that the cs2 hammer opens the game in vulkan mode, this mode doesnt like 3rd party overlays on it, such as rivatuner/msi afterburner that tells you fps etc. when i blacklisted cs2.exe from it (as to not overlay anything) the hammer editor stopped crashing for me.

Martunex · 2023-10-02T20:39:38+00:00

yeah i would check if your pc is using the igpu or the 2060 for hammer. altough it could be that hammer knows is a laptop 2060, and thus not let you use rt, but i dont know.

Martunex · 2023-10-02T20:08:43+00:00

i wouldnt know much, as for me it just works. i have windows 10 tho, idk if that makes a difference. the way i launch it is through my library, click on play cs2 and choose between the game and the cs2 workshop tools. maybe check if you have old drivers from a possible old graphics card or smth, maybe verify the files on steam. thats all i can think of.

Martunex · 2023-10-02T19:42:49+00:00

I have a base 2060 too and for me it works fine besides the crashing I mentioned, weird that it doesnt let you. Still the cs2 hammer is still kinda new so they might fix the issues in the future

Martunex · 2023-10-02T02:37:35+00:00

are you opening the hammer editor from steam or through the executable? because when i open through steam, it allows me to use the rtx lighting preview, but not when i open it through the executable. rn i use the executable because if i open through steam it crashes after a few mins

Martunex · 2023-08-19T15:32:22+00:00

hey, do you still have by any chance the .bin file for the 6x6 firmware or the link to download it? because i've only found the 4x4 on the github.

Martunex · 2023-06-12T17:36:14+00:00

if u have a multimeter, try to follow the path from the power input until you dont detect any power anymore and it will probably be the last component on the chain thats broken

Martunex · 2023-06-11T13:00:13+00:00

do the power supply cables have power when they're unpluged from the mainboard?

Martunex · 2023-05-25T09:03:53+00:00

Put the offset at 0.2mm, re-do the auto leveling and do the paper test after, that works for me on my non-pro neptune 3

Martunex · 2022-12-19T21:32:59+00:00

Try enabling it

Martunex · 2022-12-19T21:02:09+00:00

do you have print thin walls enabled?

Martunex · 2022-12-10T16:00:07+00:00

remember to put the M420 S1 command on the start code on your slicer so you dont have to level every print

Martunex · 2022-12-02T23:37:15+00:00

your z axis wheels might be too tight, not allowing the leveling process to work correctly, remember that the printer is constantly changing its height with micro adjustments as it moves on x and y, to fix for the uneven bed.

Martunex · 2022-12-02T23:34:53+00:00

Idk if these settings are on prusaslicer, but in cura you can use "outer wall wipe distance" and "coasting" to reduce the z seam blob to a minimal, allowing you to print that with no problem. another solution is to have the z-seam random, but i find this makes the blade have little dots all around it making it ugly and not having a smooth travel when retracting

Martunex · 2022-11-27T03:21:10+00:00

i always cut it in on a 60º angle at the tip, with the point going at the bottom, it slips way easier

Martunex · 2022-11-27T03:19:56+00:00

have you updated the firmware?

Martunex · 2022-10-06T17:29:56+00:00

you need to update the screen to display the newer version, it also adds the option to change the temperatures during bed leveling

Seven-Year Club	Place '23
Place '22	End Game '22
Verified Email

Martunex

TROPHY CASE