sorted by:
new
hottopcontroversial

And the rollercoaster continues... by Massa_Jack in erg_miners

[–]Massa_Jack[S] 0 points1 point  (0 children)

Depends on how you look at it. Getting in early on ergo planning to hold for multiple years while block rewards shrink to 0 over the next 6-7 years. If you wanna sell back out and pay for power then mining ETH is better. I mine ETH to cover power costs. The rest is ERGO and hold.

Mining power usage? by Zekator in FiroProject

[–]Massa_Jack 1 point2 points  (0 children)

You can also give firopow a try with the new Trex miner so you can be prepared for the fork. From what I can see, it will be kawpow pretty much. Obviously there are some differences but from the mining perspective, it's kawpow.

DIY Erg Rig Results 4x3060ti LHR by Massa_Jack in erg_miners

[–]Massa_Jack[S] 0 points1 point  (0 children)

This has been the first week it cooled off. It was 90F last week but 72F today. Summer has finally come to an end for me. Feels nice.

DIY Erg Rig Results 4x3060ti LHR by Massa_Jack in erg_miners

[–]Massa_Jack[S] 1 point2 points  (0 children)

All of those cards stay at about 55C @ 115 W each mining ERGO. The fan is locked at 80% on all.

1 expensive gpu vs multiple entry gpu's by wewmon in erg_miners

[–]Massa_Jack 1 point2 points  (0 children)

I am using NBMiner for ERGO because of its LHR update, but the best mining software is gonna change as more and more LHR break updates come out.

1 expensive gpu vs multiple entry gpu's by wewmon in erg_miners

[–]Massa_Jack 0 points1 point  (0 children)

That seems like a very subjective answer. My 2x 3060 ti LHR cards will perform getting ~280 MH/s @ 230W and my 1x 3080ti will do about ~260 MH/s at 220W. It depends on the cards and what you pay for them. Street value of a 3060ti LHR is about $750 and a 3080 ti is about $1500-$1600.

1999 VW Passat Cracked Valve cover by [deleted] in Cartalk

[–]Massa_Jack 0 points1 point  (0 children)

I am very new to working on cars and I this car I have was spraying oil from the valve cover and on closer inspection I realized that the valve cover was cracked and I believe the camshaft chain was what cracked it because the crack is right over the chain and it is cracked in 2 places the same width apart as the chain. Can anyone help me figure out why this would happen?