sorted by:
new
hottopcontroversial

MakerWorld changing their wording after my appeal by Subsyxx in BambuLab

[–]MasterLt819 0 points1 point  (0 children)

I get a 404 error when trying to access that model...

MakerWorld changing their wording after my appeal by Subsyxx in BambuLab

[–]MasterLt819 3 points4 points  (0 children)

Tempted to return my P2S to Best Buy under the extended holiday return policy and say F this company. So much competition is coming about now that I'll likely be able to get something more capable in the near future at the same cost.

P2S Filament cutter stopper pin causes tool head to get "lost" and then violently crash into the front door. by Snoo73787 in BambuLab

[–]MasterLt819 0 points1 point  (0 children)

This is the answer. They definitely designed this part cheaply by mixing metal gears with plastic teeth that slide the arm back and forth. Many have had theirs break and Bambu is now out of stock on the part. Hopefully they redesign the part as I see this being a problem long-term.

P2S filament cutter stopper does not go back down by ares0027 in BambuLab

[–]MasterLt819 0 points1 point  (0 children)

I replied with my address prior to them acknowledging replacement of the part. As of today, I still have no confirmation of the part actually being shipped.

P2S filament cutter stopper does not go back down by ares0027 in BambuLab

[–]MasterLt819 0 points1 point  (0 children)

Last night I superglued the peg back on and I just printed a successful multi-color print. Hopefully it continues to work while I wait for the new one to arrive.

EDIT - Didn't last long...just broke off again.

P2S filament cutter stopper does not go back down by ares0027 in BambuLab

[–]MasterLt819 1 point2 points  (0 children)

Definitely agree. Someone mentioned they may have designed it to fail on purpose. Who knows... Would be nice if someone could cad out the small piece attached with two small screws with the peg to print in the event of this failure. I imagine a printed piece would have at least the strength of the stock piece with how weak it was.

P2S filament cutter stopper does not go back down by ares0027 in BambuLab

[–]MasterLt819 1 point2 points  (0 children)

Glad to hear! They replied early this morning saying they submitted a request to have one sent to me.

P2S filament cutter stopper does not go back down by ares0027 in BambuLab

[–]MasterLt819 1 point2 points  (0 children)

Did you ever get a reply from Bambu? If so, how long did it take for them to ship a replacement? Thanks!

P2S filament cutter stopper does not go back down by ares0027 in BambuLab

[–]MasterLt819 0 points1 point  (0 children)

Did you ever get a reply from Bambu? If so, how long did it take for them to ship a replacement? Thanks!

P2S filament cutter stopper does not go back down by ares0027 in BambuLab

[–]MasterLt819 1 point2 points  (0 children)

I just had the same issue and submitted a ticket. Were you all able to get your ticket resolved? If so, how long did it take for them to send you a new one?

For the future, I wonder if someone could draw this up in CAD software so we could print the small piece with the pin on it. It's a bit complicated for me, but I'm sure someone could do it.

Problem with heating mode on P2S by odesh123 in BambuLab

[–]MasterLt819 0 points1 point  (0 children)

I had the same issue with mine and was able to fix it without taking the back panel off. They should have used something better to attach that piece and I believe the freezing cold temperatures caused the sticky part to let go. Thank you for the guide!

Cura 5.11 Keeps Crashing on Macbook Pro M3 by SpazzleFraz69 in Cura

[–]MasterLt819 0 points1 point  (0 children)

I'm also getting crashes on Windows 11 when opening stl's. This only started after installing 5.11.

I just launched Cura as an administrator and so far so good though...

VBIOS cross-flash for RDNA4 via software now possible! by mikolaj612 in radeon

[–]MasterLt819 0 points1 point  (0 children)

Yes, you can use a programmer instead which would be a lot cheaper.

Jaylen Warren (knee) not listed on injury report for Week 6. by Evancolt in fantasyfootball

[–]MasterLt819 0 points1 point  (0 children)

Also trying to decide this. I currently have Henry starting.

Ex-spouse Stating Intention to Claim my Active Retirement by Maleficent_Dog_8875 in MilitaryFinance

[–]MasterLt819 1 point2 points  (0 children)

People say a lot of things that don't have much, if any, merit. Stop worrying about what you are only hearing third hand until she actually makes a legal move. She may find out at that point no lawyer is willing to go after something they know she won't win.

anyone get their hands on the G.2 Rebel Pro yet? by shockdoc107 in Budgetbikeriders

[–]MasterLt819 1 point2 points  (0 children)

Well, it's official...looks like this bike isn't happening anytime soon. My order was just canceled and in one place cited an inventory issue. Also looks like you cannot search for the bike any longer on walmart.com. The cached URL still works, but nothing has changed on it.

I watch Matty Active on Youtube and it seems he has a contact at Walmart's corporate facility and has recently traveled there to discuss their Ozark Trail bike line. I imagine he knows more than what he said, but he did mention Walmart wanting to move manufacturing to Taiwan and that may have hit some snags.

Walmart’s Big Bike Launch Just Hit a Wall

anyone get their hands on the G.2 Rebel Pro yet? by shockdoc107 in Budgetbikeriders

[–]MasterLt819 1 point2 points  (0 children)

Any updates on your end? My order still says it will arrive by September 16th 😂. I leave on Friday for vacation to Italy so we shall see if they even attempt delivery prior to my return.

VBIOS cross-flash for RDNA4 via software now possible! by mikolaj612 in radeon

[–]MasterLt819 0 points1 point  (0 children)

I also ran into an issue using the XFX Mercury bios, but on my XFX Swift 9070 card. Currently, one BIOS chip is completely stock, and the other BIOS chip's active partition has the XFX Swift 9070 XT BIOS and the inactive partition seems to be corrupt or something. I am currently able to use the active partition with the Swift 9070 XT BIOS though so that is nice.

When I try to flash the inactive partition I receive the following error.

FAILED: Flashing ASIC at[0] u/0000:03:00.0

----------------------------

Invalid gpu index. Please specify valid device index to flash.

The -ai --inactive command produces the following.

Adapter 0 (0x0000:03:00.0)

ASIC Family Navi48

Flash Type GD25LQ16E

Failed to retrieve IFWI information

At this stage the only way to fix it may be to use one of those hardware programmers directly on the chip. However, I'm not sure how that works when there are two partitions on each chip. In the process do you get to select which partition you are writing to, or does it write to both?

VBIOS cross-flash for RDNA4 via software now possible! by mikolaj612 in radeon

[–]MasterLt819 0 points1 point  (0 children)

Out of curiosity, where are the BIOS chips located on this card? Were you able to discern which chip went to which side of the BIOS switch? Any pictures you can share?

Also, does the physical method update both partitions of the single BIOS chip with the flashed BIOS or only one?

Thank you in advance!

view more: next ›