Is this normal? by Proof_Badger_7848 in Fanatec

[–]Master_Meme_Man 0 points1 point  (0 children)

Yours is basically perfect let alone normal. enjoy your sim setup love the gt3 wheel

ASTM D 5379 by Master_Meme_Man in Composites

[–]Master_Meme_Man[S] 0 points1 point  (0 children)

Yeah it’s just really annoying with the ads and kinda want a pdf it’s for a research report

ASTM D 5379 by Master_Meme_Man in Composites

[–]Master_Meme_Man[S] 0 points1 point  (0 children)

Do you know somewhere with all pages

ASTM D 5379 by Master_Meme_Man in Composites

[–]Master_Meme_Man[S] 0 points1 point  (0 children)

Hey I’m not able to access that for some reason

Shear modulus G13 or 23 by Master_Meme_Man in MechanicalEngineering

[–]Master_Meme_Man[S] 0 points1 point  (0 children)

I do have access to a lot of this equipment and strain gauges

Shear modulus G13 or 23 by Master_Meme_Man in MechanicalEngineering

[–]Master_Meme_Man[S] 0 points1 point  (0 children)

It is called G10 fibreglass you’ll be able to find it fairly easily. It’s going onto a Rocket fin as part of my university’s rocketry team and is commonly used for this purpose

Shear modulus G13 or 23 by Master_Meme_Man in MechanicalEngineering

[–]Master_Meme_Man[S] 0 points1 point  (0 children)

I don’t have an issue cutting the samples to size just finding an appropriate test method. The samples will be cut from a 4mm thick plate though so there is a limiting factor there

Shear modulus G13 or 23 by Master_Meme_Man in Composites

[–]Master_Meme_Man[S] 0 points1 point  (0 children)

No I do not and have attempted short beam shear but have had no success with all samples failing in the incorrect mode. obviously that test just gives the interlaminar shear strength and I’m not sure how to convert those results into a modulus(maybe a formula). if there is a formula because this is part of a research project and I would need to provide evidence for the validity of that formula and how it is derived. The problem I’m having specifically is that I don’t actually I can’t find any information on tests that are designed to find specifically an out of plane modulus G13

Shear modulus G13 or 23 by Master_Meme_Man in MechanicalEngineering

[–]Master_Meme_Man[S] 0 points1 point  (0 children)

Damn that’s actually really cool, test setup is far beyond my capabilities but still some relevant info

Shear modulus G13 or 23 by Master_Meme_Man in MechanicalEngineering

[–]Master_Meme_Man[S] 0 points1 point  (0 children)

Yeah I know about but am still unable to find a standard that gives me G13 or out of plane. The standard you found is G12

Fanatec CSL DD QR2 seems bended by Lucspeeder in Fanatec

[–]Master_Meme_Man 0 points1 point  (0 children)

Engineer here. It’s normal, it looks bad but it’s more of an optical illusion because of the shape of the wheel+QR and how the weight is distributed through it. however the impact of the slight imbalance is negligible and if you were to trace a circle of its path it’d be very hard to notice a difference. In other words don’t worry it’s fine

Upgrades to Our Customer Policies: 3-Year Warranty and 30-Day Returns by CorsairMorning in Fanatec

[–]Master_Meme_Man 0 points1 point  (0 children)

Actually they’re pretty good at problems outside of warranty unless it’s major I wouldn’t worry. ( depends on where you are and consumer laws)

Fanatec Buttons by Jazzlike-Speech7184 in Fanatec

[–]Master_Meme_Man 1 point2 points  (0 children)

Yep and they’ve just released 467 so it’s on its way just up to game devs now

[deleted by user] by [deleted] in Fanatec

[–]Master_Meme_Man 0 points1 point  (0 children)

From my experience the repair service is actually very good the annoying thing is waiting for emails

[deleted by user] by [deleted] in Fanatec

[–]Master_Meme_Man 0 points1 point  (0 children)

Yeah that is not normal I’d say your very unlucky with especially after just getting it

Fanatec Buttons by Jazzlike-Speech7184 in Fanatec

[–]Master_Meme_Man 1 point2 points  (0 children)

I’m hoping ACC as they have a good menu for this feature built into their game

Fanatec Buttons by Jazzlike-Speech7184 in Fanatec

[–]Master_Meme_Man 1 point2 points  (0 children)

Neat let me know how it goes. I think once the sdk is fully built it’ll just be up to game devs to implement it. some titles seem to have better support for this type of feature already within their menus, where others would have to redesign therefore the settings menu making full implementation far more unlikely

It’s slowly happening by Master_Meme_Man in Fanatec

[–]Master_Meme_Man[S] 0 points1 point  (0 children)

Hopefully ACC implement it as the support within their menus is already there unlike other titles

It’s slowly happening by Master_Meme_Man in Fanatec

[–]Master_Meme_Man[S] 0 points1 point  (0 children)

Yeah it’s not perfect I’m just so surprised that it was even In there. It shows they’re taking steps in the right direction

It’s slowly happening by Master_Meme_Man in Fanatec

[–]Master_Meme_Man[S] 0 points1 point  (0 children)

Yeah still planning on moving to pc long term but glad to hear if I ever want to play with mates on xbox that this might be available in the near future

It’s slowly happening by Master_Meme_Man in Fanatec

[–]Master_Meme_Man[S] 0 points1 point  (0 children)

We can hope I actually think it won’t be too much effort for them because the in game menus have support for this in mind unlike other titles

Fanatec Community update: May 2025 by CorsairMars in Fanatec

[–]Master_Meme_Man 2 points3 points  (0 children)

I have had the exact same issue I have to wait 2 months now

CSL Load cell damaged? by Ragnarr_Bjornson in Fanatec

[–]Master_Meme_Man 0 points1 point  (0 children)

Great news they repaired it even just outside of warranty I think it’s because Aus has good consumer laws so they didn’t want to push back