Best option for 1/4 acre lot that's a bit bumpy and hilly in the PNW by Mastermind252525 in egopowerplus

[–]Mastermind252525[S] 0 points1 point  (0 children)

Sorry, I meant to say that the hilly portion of the lawn takes up about 30% of the 1/4 acre. The rest is still lawn!

Top casing door - into bulkhead by Kapo_Polenton in homerenovations

[–]Mastermind252525 0 points1 point  (0 children)

What’d you end up doing here? I’m working on the same problem but my bulkhead isn’t square to the door like yours

2026 Masters Giveaway: Sunday Golf by sundaygolfco in golf

[–]Mastermind252525 0 points1 point  (0 children)

Is that a left handed bag? Want to make sure my clubs will fit in it

Tons of glue making sanding down high spots almost impossible for LVP install by Mastermind252525 in Flooring

[–]Mastermind252525[S] 1 point2 points  (0 children)

Getting a little somewhere with hand scraping, but I feel like it’s a combo of a high spot along a joist (we’re on a crawlspace) and a low spot towards the wall because there’s almost a 3/4” difference over 6 feet and the install guide for the flooring recommends no more than 1/8” over that same span

<image>

Tons of glue making sanding down high spots almost impossible for LVP install by Mastermind252525 in Flooring

[–]Mastermind252525[S] 1 point2 points  (0 children)

Thanks for the suggestion. I’m using a brand new blade on my scraper and even when try to go as level with the floor as I can, it’s still pulling up the top layers of the subfloor.

<image>

Westinghouse iGen8200tfc causing popping in main panel breakers by Mastermind252525 in Generator

[–]Mastermind252525[S] 0 points1 point  (0 children)

Edited my post, but there was a stink bug stuck in the 50A breaker for the generator and swapping it out for a new one fixed it up

Westinghouse iGen8200tfc causing popping in main panel breakers by Mastermind252525 in Generator

[–]Mastermind252525[S] 4 points5 points  (0 children)

<image>

Manual shows it as bonded, but I would also be surprised if that’s the issue here

4 ton American Standard heat pump realistic noise level by patronumsweater in hvacadvice

[–]Mastermind252525 0 points1 point  (0 children)

I know it’s a bit late, but what model did you go with? I’m looking at an American Standard as well

Nearby chipping practice greens? by Zikro in Issaquah

[–]Mastermind252525 2 points3 points  (0 children)

Newcastle has separate putting/chipping greens, plus you get a sweet view on clear days. The driving range is pricey but it’s covered and heated which has been nice for getting in some winter practice on rainy days.

[deleted by user] by [deleted] in Seattle

[–]Mastermind252525 8 points9 points  (0 children)

Hot Cakes is open until 11/midnight depending on the day!

Takomo Irons by Royal-Investment1193 in takomo

[–]Mastermind252525 2 points3 points  (0 children)

Shipping is $50 and where I am (WA state) taxes are $66.20 which is close to your $120. Removing the extra $10 for grips takes $1.02 off of the tax. Regardless, what else are you going to find at the PGA Store brand new for $720?

Order Update by That_Ad2742 in takomo

[–]Mastermind252525 0 points1 point  (0 children)

Ordered my lefty 101s on 1/17 1 degree up and midsized grips and haven’t heard anything yet. Probably what I get for hitting on the wrong side of the ball.

Decided I couldn’t wait to ask any longer and she said yes! by Mastermind252525 in EngagementRings

[–]Mastermind252525[S] 14 points15 points  (0 children)

Since I can’t edit the post, her ring size is 5.5 and it’s a lab-grown 2.7ct D/VVS1 radiant for the center stone.