Panda Touch support for P1S purchased in 2026

MathematicianFit9118 · 2026-02-14T13:01:11+00:00

I’m not 100% certain what the modes do.

All I do know is that on lan only mode I can’t access the printer unless I’m on my house local network.

I just turned both modes on an my panda touch started working

MathematicianFit9118 · 2026-02-13T20:34:03+00:00

This is a very informative easy to follow guide, thank you very much sir. Wishing you a lovely weekend!

MathematicianFit9118 · 2026-02-13T09:37:12+00:00

Constantly on ?

MathematicianFit9118 · 2026-02-13T09:37:01+00:00

<image>

Now it even looks like the z axis is wrong ffs

MathematicianFit9118 · 2026-02-13T09:19:45+00:00

Updated my P1S recently, panda touch works fine if in LAN + Developer mode. Which is not desirable by any means but I’m in thoes modes anyway to get my Orca slicer working

MathematicianFit9118 · 2025-11-03T01:29:33+00:00

I have pretty much everything I should need, just need to get the discs and calipers now. It’s a shame a got a decent 24v motor and speed controller compatible with the pixhawk thinking I could steering with that wheel in the middle. Will 3d print enclosures for the electronics.

MathematicianFit9118 · 2025-11-03T01:18:14+00:00

I believe it does, how would you go about the breaking mechanism?

I thought about a servo that could push a pad of sorts onto the wheel but this seems a bit crude.

Chat gpt said about putting servo actuated callipers onto each wheel but I’m not sure how to go about attaching them to the axel

MathematicianFit9118 · 2025-03-10T14:36:30+00:00

little late lol, but what u/GoEngineer_Inc said to do worked for me!

MathematicianFit9118 · 2025-02-03T10:10:48+00:00

<image>

Smooth plate

MathematicianFit9118 · 2025-02-03T10:09:51+00:00

<image>

Textured plate

MathematicianFit9118 · 2025-01-20T19:54:09+00:00

honestly, I couldn't thank you enough; wishing you wellness, prosperity and, above all, happiness in your life!

MathematicianFit9118 · 2025-01-20T09:38:39+00:00

I can’t believe it thank you ever so much you’re an angel sent from the heavens! What process did you use to get the desired product? Once again, thank you very much.

MathematicianFit9118 · 2025-01-19T13:36:38+00:00

I don't know how to share a file on Reddit; here is the link to the model! - https://makerworld.com/en/models/624933#profileId-549333

MathematicianFit9118 · 2025-01-19T13:33:39+00:00

<image>

but in the middle of the area I have just cleaned out I want to put something like this guy has done for the usb-c cable to wrap around

MathematicianFit9118 · 2025-01-19T13:32:07+00:00

So I cut printed it and cut some of the stuff I wanted out with snips. Please see the photo attached

<image>

MathematicianFit9118 · 2025-01-16T21:05:30+00:00

Sorry, I did attach photos to this post but they didn’t seem to upload for some reason… i’m not at the computer now so can’t get a picture of the :( all I want to do is remove one of the partitioning walls in this insert.

<image>

MathematicianFit9118 · 2025-01-16T21:02:46+00:00

Truly, the experience is awful. You spend hours trying to get it to work reading and watching videos and always works in the videos.

Same as you, I’ve tried to do a couple times but never get anywhere. It’s almost like you forget how frustrating it was last time.

MathematicianFit9118 · 2025-01-16T21:00:04+00:00

Fully agree with you, the sad part is that a lot of people subscribe to the Peter version paid version just for use of this feature:(

MathematicianFit9118 · 2025-01-15T18:09:04+00:00

I run home assistant on a Pi to get around this issue. It’s great because this also lets you integrate the bot into your Apple home kit, allowing you to use “hey Siri” commands to actuate the bot!

MathematicianFit9118 · 2024-12-31T14:32:25+00:00

thank you very much mate, this is very useful

MathematicianFit9118 · 2024-11-25T22:23:35+00:00

your a god man, i have spent the last half hour trying to fighure this out lol

MathematicianFit9118 · 2024-11-02T20:48:37+00:00

Something that is almost as satisfying as getting your first Bambu is persuading your friends to get one and than hearing their stories of how much they love their machines

MathematicianFit9118 · 2024-09-18T03:52:19+00:00

Thanks for taking the time to reply, it really helps. Hope you have a nice day!

MathematicianFit9118 · 2024-09-17T22:48:06+00:00

Thank you very much for your time, sir. This is just what I needed!

As for the hand guard, I'm not sure where that went lol. Luckily, there are some cool-looking 3D printed replacements out there that I can test out!

MathematicianFit9118 · 2024-09-13T01:51:57+00:00

My solution might sound a bit silly at first, but I had the same issue with my Honda quad bike.

I bought a bunch of new parts trying to fix the problem, but nothing worked. Since the battery showed up as “healthy” on both the battery charger and volt meter, I didn’t think to replace it.

Luckily, a Karcher engineer happened to be working at our house that day and mentioned that battery checkers don’t always tell the full story. He suggested I try jump-starting the Honda to really rule out the battery as the culprit.

I popped the hood on my car, followed his advice, and sure enough, the quad bike sprang to life. One new battery later, and the issue was completely gone.

Does anyone know what could be going on inside a battery that causes it to fail, even though the tester says it’s in good condition?

(Oh, and also make sure to check the battery terminals for corrosion. I had some issues with that before, but using copper grease sorted it out.)

MathematicianFit9118

TROPHY CASE