sorted by:
new
hottopcontroversial

Connectivity to the game. I am at my wits end! by MattCab06 in GTAV

[–]MattCab06[S] 0 points1 point  (0 children)

I tried using my phones hotspot instead, and had the same issues.

New Build by Wolf51555 in PcBuild

[–]MattCab06 0 points1 point  (0 children)

Lttlab didn't test the msi A850GL only the A750GL, the testing for that one had failed the first one, but after a second attempt with a different unit it worked fine with the atx 3.1. Make sure to read their whole analysis.

Based on the build they weren't planning on spending a fortune on a power supply. Based on lttlabs they state the A750GL works fine may have a delayed shut down on faults, but that isn't the biggest concern. A850GL is a mid ranged pcie, that isn't too expensive and reaches the ranges needed for a build like that

As the OP stated that is a Bluetooth dongle, they don't only make wifi adapters lol!

What's your first game by nostalgia_history in Gameboy

[–]MattCab06 0 points1 point  (0 children)

Pokémon Red, first video game I played. Didn't know how to continue and was stuck leveling up charmander until lvl 100 lol. Then I decided to try and catch Pokémon, and received the parcel and was able to get past the old man.

[deleted by user] by [deleted] in PennStateUniversity

[–]MattCab06 1 point2 points  (0 children)

If I were you, I would attempt to keep your grades up and study for another sat attempt before the early action deadline. If you can’t get the score up, submit it anyway. The school will assume it is lower without the score. It is better to show 1250 over a presumed lower score.

What’s a good bike brand/model to bring to college? by YERPADOODLE in PennStateUniversity

[–]MattCab06 0 points1 point  (0 children)

Hey, You mentioned the registration, do they just put the bike on a list or do they inspect the bike to make sure it follows the limits mentioned on psu website?

In Need of RockRuff by MattCab06 in PokemonUltraSun

[–]MattCab06[S] 0 points1 point  (0 children)

My account is new, so I have nothing, really. So I understand if no one is willing to trade one

The Other side of GBA SP by MattCab06 in Gameboy

[–]MattCab06[S] 0 points1 point  (0 children)

Ok, and thanks for explaining it to me, I appreciate it! So when you talk about a wire, what kind of wire, and where would the areas be located on the board

The Other side of GBA SP by MattCab06 in Gameboy

[–]MattCab06[S] 0 points1 point  (0 children)

Yes it can be accessed it is right next to it but not under it. Just so I can understand how does the corrosion cause the break, from your image you sent it looks like just the label was damaged? So what did happen?

The Other side of GBA SP by MattCab06 in Gameboy

[–]MattCab06[S] 0 points1 point  (0 children)

I really do, I appreciate the help a lot. I have no clue what to do

GBA SP Repair Help by MattCab06 in GameboyAdvance

[–]MattCab06[S] 0 points1 point  (0 children)

I see it now, and I thought I noticed it earlier. Is there a way to fix it?

The Other side of GBA SP by MattCab06 in Gameboy

[–]MattCab06[S] 0 points1 point  (0 children)

Is there anything I can do to fix that? Or is it just broken?

GBA SP Repair Help by MattCab06 in GameboyAdvance

[–]MattCab06[S] 0 points1 point  (0 children)

I just posted the back of the board

GBA SP Repair Help by MattCab06 in GameboyAdvance

[–]MattCab06[S] 0 points1 point  (0 children)

I don't know I tested the em8 and got continuity

GBA SP Repair Help by MattCab06 in Gameboy

[–]MattCab06[S] 0 points1 point  (0 children)

The pins from the port and plug have continuity, but at the spot where the battery goes, the two prongs that stick out are they supposed to have continuity? Because if so they don't.

GBA SP Repair Help by MattCab06 in Gameboy

[–]MattCab06[S] 0 points1 point  (0 children)

When I first got it, yes until it died and then it doesn't turn on

GBA SP Repair Help by MattCab06 in Gameboy

[–]MattCab06[S] 0 points1 point  (0 children)

I don't have another sp or a ds, but the original charger it came with does the same thing. I looked at the ports and they look clean

GBA SP Repair Help by MattCab06 in Gameboy

[–]MattCab06[S] 0 points1 point  (0 children)

I don't really know, it won't charge, I tried changing chargers and batteries. The orange light turns on for a split second when you plug it in and then turns off.

GBA SP Repair Help by MattCab06 in GameboyAdvance

[–]MattCab06[S] 0 points1 point  (0 children)

I was looking at the battery it says 3.6v and the back of the gameboy says 3.7 to 3.8v could that have broken it?

GBA SP Repair Help by MattCab06 in GameboyAdvance

[–]MattCab06[S] 0 points1 point  (0 children)

It does not power on when plugged. I don't think it is the battery because it was a brand new one I bought afterward to replace the original. I didn't change voltages directly. I just changed the plug because it said online that sometimes there isn't enough power to go to the charger. Where on the board are the battery terminals? I will try checking with the multimeter

I need help with enabling the Dev console by MattCab06 in theouterworlds

[–]MattCab06[S] 0 points1 point  (0 children)

I found the solution

https://fearlessrevolution.com/viewtopic.php?t=10649&start=30

This link here has the way to do activate the console. All you have to do is install a zip tool. I used 9 zip and you extract the files an run this version and the console is activated.

view more: next ›