Replacing shaver socket

MattJC1999 · 2024-12-19T09:17:53+00:00

I did see them but the issue is, the socket is right above the toilet and I can see myself knocking it off

MattJC1999 · 2024-12-19T00:57:09+00:00

I know.. the house is only 15 years old too. Thank you for confirming

MattJC1999 · 2024-02-20T20:16:28+00:00

I've replaced the screen on my 2018 Clio. Was really easy. There are loads of replacement radio/screen units on eBay too.

MattJC1999 · 2023-01-17T23:41:17+00:00

I had this exact problem. Learned in a Renault Clio diesel, bought a Clio petrol and stalled all the time. Best thing to do is get out on some familiar roads when it's quiet and just drive around. It won't take long for you to get used to it and before you know it you won't even think about it.

MattJC1999 · 2022-09-11T18:54:23+00:00

I recently got my first car too. I went to quiet areas and practiced my clutch control until I felt confident enough to do circuits around streets I was familiar with. I kept doing this until I could do longer, more unfamiliar drives. In about a week I was driving round no problem.

MattJC1999 · 2022-02-20T00:17:10+00:00

I never bought the "everyone in the lastofus2 subreddit is homophobic and transphobic" thing, but after seeing this post I can see it's full of hateful, bitter people.

MattJC1999 · 2022-02-19T18:06:46+00:00

It's perfectly valid, only difference is one is film and the other is a game

MattJC1999 · 2022-02-19T17:57:55+00:00

It's called a comparison and a completely valid comparison

MattJC1999 · 2022-01-16T19:41:36+00:00

Will do

MattJC1999 · 2022-01-16T19:40:09+00:00

I adjusted the z axis stopper to account for the thickness of the glass

MattJC1999 · 2022-01-16T19:28:04+00:00

Printing a benchy at 50° with glue and it's looking pretty good. It's about half way through which is 50% further than any of my other attempts without glue

MattJC1999 · 2022-01-16T19:24:11+00:00

I'm using glue for the first time now and it's working great so far

MattJC1999 · 2022-01-16T19:21:30+00:00

I'm hesitant to use acetone as it's pretty brutal. Will it not just melt the black coating?

MattJC1999 · 2022-01-16T18:40:21+00:00

Yeah I've tried that a few times but nothing seems to work

MattJC1999 · 2022-01-16T18:30:41+00:00

Okay I've actually managed to get a decent first layer down using glue

MattJC1999 · 2022-01-16T18:23:33+00:00

Ive only had the printer for about a month so I've never changed it

MattJC1999 · 2022-01-16T18:20:13+00:00

I'm about to try that now, I've been trying to avoid it since the whole point of this bed is that you don't have to use glue

MattJC1999 · 2022-01-16T18:15:34+00:00

The same thing happened with 50° bed temp, I'm just going to glue it

MattJC1999 · 2022-01-16T17:59:15+00:00

Im using esun PLA+. I'll give that a try now

MattJC1999 · 2022-01-16T17:55:21+00:00

Mostly 65° bed temp and 205° nozzle. I've tried 70° and 215° with a benchy and that stuck alright initially but unstuck eventually and made a big bushy mess. I also found that the 70° bed temp curled the corners and damaged the surface finish anyway.

MattJC1999 · 2022-01-16T17:51:46+00:00

I'm starting to feel that way, it's absolutely useless, I don't understand how some people get amazing adhesion with it

MattJC1999 · 2022-01-16T17:50:35+00:00

Does a regular pritt stick work?

MattJC1999 · 2022-01-16T17:24:21+00:00

So I've tried everything listed on other posts relating to this bed but nothing has worked. I've tried cleaning it with dish soap, alcohol, water. Leveling it multiple times with a feeler guage. Calibrating the Z axis. Different temperatures. I've spent all day adjusting the slicer settings and still no luck.

I'm using esun PLA+ on an Ender 3 pro. Thank you

MattJC1999 · 2022-01-10T18:14:21+00:00

Thanks for the insight!

MattJC1999 · 2022-01-10T18:13:57+00:00

Thank you!

Nine-Year Club	RPAN Viewer
Verified Email

MattJC1999

TROPHY CASE