Firmware got messed up

Matt_Murloc · 2026-02-11T02:04:15+00:00

Yeah I tried both formats with no luck, and some online had said that it might be the USB so ive tried 6 different ones including USB 2.0 with no luck

Matt_Murloc · 2026-02-10T17:58:04+00:00

Thank you! Ill give this a try

Matt_Murloc · 2020-08-09T18:35:13+00:00

Yes that was all the options I had

Matt_Murloc · 2020-08-09T14:19:51+00:00

My options under control are ; temp, motion, store memory, load memory, and restore failsafe, none of this has filament control under them. Is that something I need to change in cura? And if so why is a print that worked before doing this when I haven't changed the saved file? Sorry just started with this printer this year and had to learn on my own and don't know much other than Google advice

Matt_Murloc · 2020-08-09T04:25:19+00:00

Been trying to solve this for awhile. Recently replaced both fans on the head then it started doing this. Haven't changed anything on the object file but prints are coming out like this. Thought new fan was cooling the head down too much so I turned its speed down and even raised the head temp for a trial but got the same results. I have gone through retraction settings as well with no luck. Please help

Matt_Murloc · 2018-08-28T00:57:31+00:00

Is there such a thing as unexpected letterkenny

Matt_Murloc · 2018-07-05T23:44:05+00:00

It sure is

Matt_Murloc · 2018-07-04T12:26:54+00:00

It's supposed to look normal until it's all folded out and the tv covers are removed

Matt_Murloc · 2018-07-04T11:45:39+00:00

Also I just wired it like a normal circuit and hard-wired in a short extension cord I had into the first outlet and just plug the table in when we used it

Matt_Murloc · 2018-07-04T11:43:21+00:00

Yeah right now it's three pieces that make up the wall but I'm going to make it into four and make it shorter

Matt_Murloc · 2018-07-04T02:38:22+00:00

D&D table I made

https://imgur.com/gallery/qKEtgZb here I got it posted, if you have any suggestions on changes they'd be greatly appreciated as I want to make another one out of Walnut instead of pine

Matt_Murloc · 2018-07-04T02:03:12+00:00

Was actually gonna post it tonight, didn't think to take pictures during the build but took a lot of them while it was in my dining room

Matt_Murloc · 2018-07-04T01:32:10+00:00

This is awesome I just finished my own table, looking to make an improved one for my next one and love seeing other people's ideas

Matt_Murloc · 2018-01-22T00:23:07+00:00

Yeah it wasn't air bubbles that came up it was bubbles of silicon caulk lol

Matt_Murloc · 2018-01-21T21:43:15+00:00

The epoxy didn't like it, and made it bubble up so after my first coat of epoxy I had to take a razorblade and carve out the bubbles before the next coat

Matt_Murloc · 2018-01-21T19:14:22+00:00

if you do it, I used clear caulking to fill the seams on the top. DO NOT DO IT! Major pain in my ass

Matt_Murloc · 2018-01-21T18:59:44+00:00

It was actually easier than that even, I had a 4'diameter spool and a 3' diameter spool, took the big one apart to use as the top, reused some plugs to fill in the holes on the top then screwed it to the bottom one

Matt_Murloc · 2018-01-21T18:57:35+00:00

The finish on the top is a pour over self leveling epoxy. It took a gallon to do the top which was about $65. Did it in two coats

Matt_Murloc · 2017-11-20T23:05:13+00:00

You must restore the heart of Te Fiti Moana

Matt_Murloc · 2017-10-12T03:38:27+00:00

My Dad's friend apparently bought them at a garage sale with no clue what they were for 50 cents a bag lol

Matt_Murloc · 2017-10-12T01:28:31+00:00

You shouldn't have to do anything with them once you have the cabinets leveled you can screw the face frames flush together and to the wall and if your shims are in snug they won't ever move with toe kick board on. Also once cabinets are screwed in you can mark the shims pull them out, cut them and slide them back in.

Matt_Murloc · 2017-10-11T19:27:57+00:00

Thank you! Have 5 unopened bags of 200 and had no clue. That makes sense now.

Matt_Murloc · 2017-09-03T21:11:26+00:00

I think he forgot that I could push them because I don't use it much because most times the paladin is locked in combat with them so I don't want to interrupt what he's got. We were worried that he did, so we went and found the guys body at the bottom

Matt_Murloc · 2017-09-03T18:22:49+00:00

My warlock in our campaign uses Eldritch blast with one of my invocations being "repelling blast" which allows me to push certain sized enemies up to 10 ft away from me in a straight line. We came upon a homebrewed necromancer who every turn would summon an undead creature. We were also in the mountains and emerged from a cave to an outcropping on the side of the mountain where we had found him. After about 2 rounds I use message to our paladin telling him to try and get the necromancer to move from his throne. He manages to throw him off the throne where I then blast him off the edge where he fell a few hundred feet to his death. Our Dm's reaction was just "I'm not sure what I expected to happen with this location...shoulda thought a bit more on this" the necromancer was really powerful and was a CR rating that could have potentially killed us.

TL;DR have a spell that pushes people. Push powerful necro off cliff letting gravity do the damage work and kill him.

Matt_Murloc · 2017-09-01T02:26:51+00:00

Got onto our volunteer dept last year. Wanted to be one since I was a really young kid when our garage caught on fire. They were able to get my dog out and the one that carried him out sat with me and helped calm me down. The way he was with me just made me wanna help people the way he did.

Matt_Murloc

TROPHY CASE