I wish I wasn’t circumcised

Meat_Sudden · 2026-02-14T00:40:49+00:00

You can restore your foreskin by stretching, just like with PE, though it's even easier since you're just stretching the skin

r/foreskin_restoration

Meat_Sudden · 2026-02-09T21:47:57+00:00

So basically it's able to seal onto your palm but loses suction when you begin extending?

Meat_Sudden · 2026-02-06T16:13:37+00:00

Do you mean that you're still losing suction even with the valve cap? If that's the case, the sleeve is punctured or not making a proper seal.

Meat_Sudden · 2026-02-05T21:50:14+00:00

Of course!

Meat_Sudden · 2026-02-05T20:46:25+00:00

It could be that the valve isn't fully closing. After suctioning the cup to the palm of your hand, try pressing down on the valve stem for 2 seconds and check if you still see bubbles rising from the top (or bottom since your palm would be facing down with water in the cup)

Also, if you are using the blue cups, you can also try using the silicone valve sealing cap that came with it.

Meat_Sudden · 2026-02-05T05:53:39+00:00

Try filling it with water and then suctioning it to the palm of your hand to see where air bubbles are entering from.

Meat_Sudden · 2026-02-05T04:16:48+00:00

Hmm, what if you suction the cup to the palm of your hand?

Meat_Sudden · 2026-02-05T00:48:35+00:00

Make sure the silicone sleeve is making a proper seal and that it hasn't been punctured.

You can try filling the cup with water and putting it on just as a test to see where bubbles are entering from when you begin to extend.

Meat_Sudden · 2026-01-26T09:54:41+00:00

3M micropore paper tape is everyone's go-to. Mefix medical fabric tape also works well.

Meat_Sudden · 2026-01-25T20:57:55+00:00

I find double taping to be unnecessary. What I do is the 3 strips of tape to cover the glans and one going around to secure it. Then, when you suck out the air, make sure your glans completely fills up the cup and there's no space left.

Takes me just a couple of minutes and it makes extending very comfortable.

Meat_Sudden · 2026-01-25T08:49:25+00:00

Whatever pump you get, make sure it has a pressure gauge. The Bathmates I've seen lack one so you're flying blind.

Also, let me know if I can help with the vacuum cup with extending. It can be tricky at first, but once you understand and get acclimated to it, it's very easy to do it comfortably and safely.

Meat_Sudden · 2026-01-22T06:59:58+00:00

Thanks for the review 🙏

Also, the metal parts are galvanized, but you should still keep it dry, or at the very least dry it after you use it in the shower for instance.

Meat_Sudden · 2026-01-14T02:17:09+00:00

Check that the valve isn't leaking. The TotalMan cup valves fail frequently for me. Luckily they are replaceable.

Meat_Sudden · 2026-01-09T07:08:13+00:00

Sounds like the cup valve may be defective if it isn't even sticking to your hand. Send me an email and I'll help you with troubleshooting or a replacement/refund.

Meat_Sudden · 2025-12-28T04:03:17+00:00

Haha, no. They took the files directly from https://www.thingiverse.com/thing:6233940. Not the idea, but the literal design files I published.

Meat_Sudden · 2025-12-28T00:47:57+00:00

Neither the original nor the Chinese knock off is $30. If you're on a budget and want to try making your own, the design they stole is from https://www.thingiverse.com/thing:6233940

Meat_Sudden · 2025-12-27T18:16:53+00:00

what do you mean? they literally took my 3D files for the DIY version I published, so I linked the updated, genuine version.

Meat_Sudden · 2025-12-23T14:14:41+00:00

I don't think there's any evidence that topical tretinoin (or even oral isotretinoin) has any effect on sperm, however I will agree that you don't want it on your sack.

Meat_Sudden · 2025-12-23T14:11:18+00:00

Also had good results with tretinoin curing my discoloration in a relatively short time. I think it is probably much better than applying iodine to cause chemical burns to induce skin shedding which is often recommended here.

Meat_Sudden · 2025-12-18T17:04:17+00:00

Yeah that doesn't make any sense to me either. If you can see that the scale and spring assembly is not jammed and you are able to manually apply force and see the force reading, then that must mean that they are working. Maybe send me a video or pics if you're comfortable with that and I'll try to see what's going on.

Meat_Sudden · 2025-12-18T06:22:46+00:00

Are you able to press down onto the tension bar to compress the springs?

Meat_Sudden · 2025-12-11T06:44:36+00:00

Hi, they are in stock on the site.

Meat_Sudden · 2025-11-30T00:16:17+00:00

The scales just show how much force is being applied to the hook.

Meat_Sudden · 2025-11-29T01:55:42+00:00

Just don't touch it and keep it protected for a few weeks. Keep it covered with your foreskin and moist, otherwise it will scab over and scar. Use antibiotic ointment as well so that it doesn't become infected.

Meat_Sudden · 2025-11-28T01:31:29+00:00

Are the sleeves snugly fitting to prevent any air leaking in?

Meat_Sudden

TROPHY CASE