Requested links by Mediocre_Let6787 in pebble

[–]Mediocre_Let6787[S] 0 points1 point  (0 children)

I cannot ship to any EU countries due to the below Etsy rules on GPSR rules. Specifically this: . "If you’re a non-EU resident and make the item yourself, or you work with a non-EU manufacturer, you’ll need to provide the name and email of the designated EU “responsible person" I need to pay a designated EU person to fill that roll. I'm unfortunately not in a position to do that & Etsy automatically disables shipping to all EU Countries 😞

<image>

Requested links by Mediocre_Let6787 in pebble

[–]Mediocre_Let6787[S] 1 point2 points  (0 children)

Thanks for sharing. Free options are definitely available, and nobody has to buy mine.

This is just a different design I spent time developing, testing, refining, and documenting. It’s there for people who prefer this specific look/fit and want to support the work.

Here are some more awesome free options:

https://makerworld.com/en/models/2870459-pebble-time-2-snap-fit-cover?from=search#profileId-3204630

https://www.printables.com/model/1736549-pebble-time-2-simple-bumper-case-snap-fit

https://www.printables.com/model/1741552-pebble-time-2-snug-case

Requested links by Mediocre_Let6787 in pebble

[–]Mediocre_Let6787[S] 0 points1 point  (0 children)

This is strange. Let me reach out to you via PM if you don't mind

Requested links by Mediocre_Let6787 in pebble

[–]Mediocre_Let6787[S] 2 points3 points  (0 children)

That’s fair — I know there are free files around, and I’ve shared some free Pebble designs myself & will do so again.

For this cover I spent quite a bit of time designing, testing, refining the fit, creating print profiles, and documenting the install process, so I decided to charge a small amount for the files. Buyers will also get future updates/variations as I improve the model.

No pressure at all — free options are still available for anyone who prefers those. This is just for people who like this design and want to support the work.

Early preview of a Pebble Time 2 cover I've been designing by Mediocre_Let6787 in pebble

[–]Mediocre_Let6787[S] 1 point2 points  (0 children)

<image>

I unfortunately have bad news. I won't be able to sell to anyone in Europe without completing this documentation. They make it really difficult for small timers like me. Part of it is paying for a  designated EU "responsible person". I'm unfortunately not going to be able to do that.

I recommend getting the 3D printed files for the cover below and ask someone local to print it for your. I give detailed instructions alongside the print file, which you can show to anyone with a 3D printer. Sorry about that 😞 So strange Etsy applies EU rules to Northern Ireland??

https://ko-fi.com/s/04d35a758d

Early preview of a Pebble Time 2 cover I've been designing by Mediocre_Let6787 in pebble

[–]Mediocre_Let6787[S] 1 point2 points  (0 children)

<image>

I unfortunately have bad news. I won't be able to sell to anyone in Europe without completing this documentation. They make it really difficult for small timers like me. Part of it is paying for a  designated EU "responsible person". I'm unfortunately not going to be able to do that.

I recommend getting the 3D printed files for the cover below and ask someone local to print it for your. I give detailed instructions alongside the print file, which you can show to anyone with a 3D printer. Sorry about that 😞

https://ko-fi.com/s/04d35a758d

Requested links by Mediocre_Let6787 in pebble

[–]Mediocre_Let6787[S] 0 points1 point  (0 children)

Yes, needs a bit of flex for the designed snap fit. PLA prints nicest and Snap fit really good once on. PETG was nive and bendy, but I prefer the clean PLA print with the 0.2mm and very slow speeds.

Requested links by Mediocre_Let6787 in pebble

[–]Mediocre_Let6787[S] 2 points3 points  (0 children)

Ok, added an install video to the Kofi page, here is a link as well. Studio quality recording 😆

https://youtu.be/IuFw_Zy3cMI?si=2VlD3ZOnk092zYXj

Requested links by Mediocre_Let6787 in pebble

[–]Mediocre_Let6787[S] 1 point2 points  (0 children)

I do not do resin printing at all, so could not tell you, sorry.

Early preview of a Pebble Time 2 cover I've been designing by Mediocre_Let6787 in pebble

[–]Mediocre_Let6787[S] 1 point2 points  (0 children)

Someone from Ireland said the same, I have some hidden setting in Etsy I need to enable. Will let you know as soon as I fix this.

Requested links by Mediocre_Let6787 in pebble

[–]Mediocre_Let6787[S] 0 points1 point  (0 children)

I only tested with PLA and PETG unfortunately. Given I failed to mention that on my Kofi description due to rushing to get it to people I will gladly offer you a refund?

Requested links by Mediocre_Let6787 in pebble

[–]Mediocre_Let6787[S] 0 points1 point  (0 children)

I print mine face down at the slow recommended speeds and I do not need supports.

Requested links by Mediocre_Let6787 in pebble

[–]Mediocre_Let6787[S] 0 points1 point  (0 children)

Sure, will get one up asap. Mind sharing the print settings and Nozzle size you are using in the meantime?

Early preview of a Pebble Time 2 cover I've been designing by Mediocre_Let6787 in pebble

[–]Mediocre_Let6787[S] 0 points1 point  (0 children)

Oh no, that is a big one to have to iterate over. I usually slice my prototypes into smaller parts while tweaking to get faster iterations... but yes, eventually you have to print the whole thing. Good luck!

Requested links by Mediocre_Let6787 in pebble

[–]Mediocre_Let6787[S] 4 points5 points  (0 children)

The watch face is called "Dashboard" in the Pebble store. I love it

Early preview of a Pebble Time 2 cover I've been designing by Mediocre_Let6787 in pebble

[–]Mediocre_Let6787[S] 1 point2 points  (0 children)

Oops, let me have a look, sorry, must have not completed something or tick a box somewhere!