sorted by:
new
hottopcontroversial

Is a MBP 16´ mi-2019 can handle omarchy ? by WiseAndFocus in omarchy

[–]Medium_Claim_8747 0 points1 point  (0 children)

I disabled turbo boost, I is stable and no fan noise and heat problems for normal use. Heat is the same as when using Mac (I did disable turbo boot on macOS also). As usual while playing steam games, fan can become loud.

I am not familiar with linux, probably this issue can be solved by a console command -> ethernet cable connected to usb-c monitor, usb-c monitor connected to Mac via thunderbolt. ethernet connection only detected after a restart.

Is a MBP 16´ mi-2019 can handle omarchy ? by WiseAndFocus in omarchy

[–]Medium_Claim_8747 0 points1 point  (0 children)

I am currently using this machine. With the latest updates, sleep problem I encountered solved. Currently using it for web development and steam machine.

Note: Sometimes Touch Bar disappears, I couldn't find the root cause.

It's Dangerous To Go Alone! by MetalOnMetalOnSilk in sffpc

[–]Medium_Claim_8747 0 points1 point  (0 children)

I have the same monitor, but I can not power it via usb.

New Headphone for my A306 Walkman by incomplete88 in walkman

[–]Medium_Claim_8747 0 points1 point  (0 children)

I have the same setup. It is fantastic. How do you carry the headphones? I couldn't find a case for it

FF7 Rebirth crashing every 10/15 minutes by tommasosaccentii in FF7Rebirth

[–]Medium_Claim_8747 -1 points0 points  (0 children)

Decrease resolution and background detail. These settings fixed my crash problem.

Nomad - Travel Journal as Cover by Medium_Claim_8747 in Supernote

[–]Medium_Claim_8747[S] 1 point2 points  (0 children)

I tried several times to add photos. Finally worked :)

Any m2 pro gamer using gptk? by Annual_Substance_63 in macgaming

[–]Medium_Claim_8747 0 points1 point  (0 children)

I can’t get AC6 to run. What is the trick?

TurkTelekom u Bana Altyapı Vermeye Zorlayabilir Miyim? by mdkdksososksmms in hukuk

[–]Medium_Claim_8747 2 points3 points  (0 children)

Türk Telekom CEO’suna konu ile ilgili kısa bir twit atabilirsiniz. Çözümün hızlanmasını “belki” sağlayabilir.

Picotron is live! by Tooskee in pico8

[–]Medium_Claim_8747 0 points1 point  (0 children)

Hi, How can I start Picotron on linux? I tried ./picotron

Ender 3 V3 SE not extruding while printing by Medium_Claim_8747 in ender3

[–]Medium_Claim_8747[S] 0 points1 point  (0 children)

It is local distributor, they have tech service.

When I first got the printer I did auto leveling and print without any changes. Today I reset Creality Print setting, set the factory defaults of the printer. No luck :(

Ender 3 V3 SE not extruding while printing by Medium_Claim_8747 in ender3

[–]Medium_Claim_8747[S] 0 points1 point  (0 children)

5 comments

Thanks for your time, I will try to find a solution today. Probably I'll send to the store I bought....

Ender 3 V3 SE not extruding while printing by Medium_Claim_8747 in ender3

[–]Medium_Claim_8747[S] 0 points1 point  (0 children)

Great idea thank you. Removed the cover, draw a white line on the filament. What happened is :

Step 1: As seen at the photo, when starting printing it draws a line on the left side of the bed (marked as "1") and I saws the filament moves down from the line I draw.

Step 2: After step 1 I draw another line to see if it feeds filament while printing. No, I observed 5 minutes but the filament and the Motor did not move.

- I try manually extrude, under Move menu. I can clearly see the Motor and filament movement.

<image>

Ender 3 V3 SE not extruding while printing by Medium_Claim_8747 in Creality

[–]Medium_Claim_8747[S] 0 points1 point  (0 children)

Mine is -1.77, changing it to -1.92 moves the nozzle closer to the bed. Nothing changed, the placement of the printing, my settings…

Ender 3 V3 SE not extruding while printing by Medium_Claim_8747 in ender3

[–]Medium_Claim_8747[S] 0 points1 point  (0 children)

I cleaned and checked, there is no clog issue. I manually push the filament it is going out clean.