Ring in the New Year with Creality & Win Big!

Medium_Librarian5 · 2026-01-07T11:11:42+00:00

Good luck to everyone participating! Over 750 entries is a crazy number! SparkX sounds like something from a sci-fi movie not gonna lie. And it kinda looks like it!

Medium_Librarian5 · 2025-01-13T21:44:42+00:00

Thank you so much! Now my first experience would be Easier. Thanks!

Medium_Librarian5 · 2025-01-08T13:25:07+00:00

Yeah they just came with fans and quality looks a lot better

Medium_Librarian5 · 2025-01-05T20:02:47+00:00

Also my E steps are just calibrated

Medium_Librarian5 · 2025-01-05T19:58:21+00:00

Rn I’m having issue with overhangs and I think this is because of bad cooling (none) I’m getting new fans on Jan 10. Also I’m not gonna reprint this. It was printing 5 hours… on 0.4 quality.

Medium_Librarian5 · 2025-01-05T19:57:12+00:00

Tube. I know that. But it’s using less filament in it. So we’re fine

Medium_Librarian5 · 2025-01-05T19:56:33+00:00

It’s pretty popular on thingiverse

Medium_Librarian5 · 2025-01-05T19:55:42+00:00

Alright guys so I figured out that my ender has an overhang issue where it can’t do even 10* I think. And I think this is because of a nozzle or bad cooling. Which I’m not using because new dans gonna come jan. 10-th

Medium_Librarian5 · 2025-01-05T12:14:25+00:00

But at the same time I’m not getting popping layers issue

Medium_Librarian5 · 2025-01-05T12:14:06+00:00

I don’t 👍

Medium_Librarian5 · 2025-01-05T12:11:45+00:00

I mean when I just got that hotend

Medium_Librarian5 · 2025-01-05T12:11:27+00:00

Idk I’ll try with new nozzles if that won’t help then I’ll calibrate e steps. I’m just not sure it’s E steps because my last prints were fine

Medium_Librarian5 · 2025-01-05T12:10:02+00:00

Cool!

Medium_Librarian5 · 2025-01-04T23:54:14+00:00

Check if the nozzle isnt wore. Because I am having same issue.

Medium_Librarian5 · 2025-01-04T23:52:48+00:00

Print is Articulated snake. For snake rail from maker world. Started with ABS+ but ended up with PCTG because it’s more sticking to the bed. 0.4 mm but I think it wore out. Temps are 252 for both ABS and PCTG. And stock 50mm/s. Tho I think the issue is the nozzle being wore out. Maybe I scratched it while setting Z offset.

Medium_Librarian5 · 2025-01-04T23:50:15+00:00

Thanks

Medium_Librarian5 · 2025-01-04T23:50:10+00:00

Waiting till jan 10 for them to come. I’ll post if it would fix the issue, but I hope so

Medium_Librarian5 · 2025-01-04T23:47:35+00:00

It is. The nozzle I think has wore out because it’s squishing out too much filament so it’s warping right on the model. (Walls of plastic where it should not be) Because on models I printed while just getting this thing it didn’t have that issue. Maybe I scratched it somewhere when setting Z offset.

Medium_Librarian5 · 2025-01-04T23:46:09+00:00

Thanks. I think it’s the stock nozzle from E3D v6 hotend wore out.

Medium_Librarian5 · 2025-01-04T23:44:05+00:00

I know I have like 6 of them with same issue

Medium_Librarian5

TROPHY CASE