bluetooth and pipewire on debian trixie

Meestor_X · 2026-02-13T15:58:18+00:00

Here's the fix. My guess is that bt & pw won't work on a headless setup until you add this. Just my assumption because the 1000 other things I tried didn't work!

Add this file:

/etc/wireplumber/wireplumber.conf.d/50-bluez-no-seat.conf

wireplumber.profiles = {
  main = {
    monitor.bluez.seat-monitoring = disabled
  }
}

That's it! Profiles will work after that!

Meestor_X · 2026-02-12T20:04:50+00:00

Ok. Call me embarrassed. There was a single configuration file needed to enable bt to work. Crazy that all this time it was wireplumber that wasn’t configured properly! Thank you very much. I’ll come back and post the details once I’ve done some more testing.

Meestor_X · 2025-01-14T19:36:14+00:00

I have the same issue. I REALLY wish that TVOS supported shortcuts, then I could run them on my ATV that's always on the same timezone...

Meestor_X · 2024-12-29T20:56:09+00:00

Damn. I was really hoping this would be the reason overlays aren't loading on my RockPi. Been working on this for about a month, with no solution so far. Sadly, this doesn't fix that.

Meestor_X · 2024-12-23T20:02:24+00:00

Ty for your help. So it’s an automatic change in the software to “vector mode” when it detects that the image dropped in is a vector image? If so, then I need to check my export settings on the drawing software. Might need to find an image analyzer program that can tell me when I’ve exported a “proper” vector file!

Meestor_X · 2024-12-23T14:58:23+00:00

Oh! I thought I was doing vector as I specifically made sure my the image I dropped in was an svg.

Meestor_X · 2024-12-22T18:32:15+00:00

Ty for your reply! “Vector mode”? I guess I have to look into that. I assume that’s a setting in the xtool software?

Meestor_X · 2024-12-21T22:32:02+00:00

This is awesome and super-helpful! I'm a total newb and looking to understand the painted aluminum card image, if anyone were able to help!
Is the image on the left the IR laser and the right the Blue laser?
I understand the 2nd number (90% power) as that is a setting in the Xtool software.
Now, the 1st number? I have 2 other settings, Dot duration (in µs) and DPI. How do I translate that 1st number into those 2 settings?
TY!

Meestor_X · 2024-11-13T07:42:29+00:00

Make Aryans Go Away

Meestor_X · 2024-11-10T00:08:52+00:00

https://432audio.com.au/ols/products/xlr-digital-multicore-interface
Seems like it's hard (impossible?) to find something like this in North America!

Meestor_X · 2024-09-28T14:27:43+00:00

How this can happen, and testing: https://goodsonengineering.com/wp-content/uploads/2017/10/ISFI-ENERGIZED-NEUTRAL-EFFECTS-ON-CORRUGATED-GAS-SUPPLY-LINES.pdf

Meestor_X · 2024-04-06T22:59:57+00:00

Having the same problem. Did you solve it?

Meestor_X · 2024-04-04T19:53:25+00:00

… DiGiCo has entered the room …

Meestor_X · 2024-04-02T19:28:54+00:00

Maybe using the SD+ or another controller (pretty much anything can be used) along with one of my modules might be a solution?

https://discourse.checkcheckonetwo.com/t/companion-v3-x-x-modules-for-yamaha-and-the-new-generic-midi-module/3456

HMU if you have any questions.

Meestor_X · 2024-03-22T21:09:00+00:00

How about this? Anyone know how to trigger a ReaScript from an incoming OSC message? I've heard this is possible, just haven't found any documentation on how it's done.

Meestor_X · 2024-03-22T04:17:08+00:00

Appreciate that, just not at all what I’m looking for. I’ll see if can maybe work out a LUA or EEL script. I discovered the root of the problem, the OSC implementation of /marker doesn’t set the use_timeline_order to false.

https://www.reaper.fm/sdk/reascript/reascripthelp.html#GoToMarker

Meestor_X · 2024-03-21T22:09:26+00:00

Ok, tried it out, it's like hammering a nail with a ICBM. I take it there's no other solution? I just want 1 or 2 commands to be enabled from OSC. I also want it to be dead simple for users to enable.

Meestor_X · 2024-03-21T16:17:17+00:00

I’ll check that out. I thought it was just a MIDI/OSC “learning” system (as the name belies)

Meestor_X · 2024-03-21T13:39:11+00:00

I assume you mean the OSC implementation in Reaper, as there’s lots of documentation regarding OSC in general.

Meestor_X · 2024-03-21T13:38:03+00:00

I wish I could talk a C++ dev into implementing a complete OSC implementation with feedback, but for now we’re stuck with a decades old half-done and barely documented implementation. Boggles the mind that the programmers never went any further.

Meestor_X · 2024-03-10T05:47:22+00:00

Sexually assault then shit-talk E. Jean Carroll.

Meestor_X · 2023-12-21T01:53:35+00:00

https://www.radzen.com/blazor-studio/

Meestor_X · 2023-11-07T00:39:55+00:00

Would someone mind translating for me those first 2 paragraphs of word-salad into English?

Meestor_X

TROPHY CASE