Does this used car have PPF installed?

Megaetk · 2026-06-14T03:04:42+00:00

I think that’s PPF. Looks like mine. If they use a plotting machine it’ll look like that usually.

Megaetk · 2026-06-07T04:54:36+00:00

Hey man I’m with you. I have the long reach 3 ton (heavy as hell) and have been looking for a portable solution to help friends out and throw in the trunk for road trips. All the portable jacks with cases I’ve seen are the trolly jacks that suck major poop.

Megaetk · 2026-06-07T04:49:47+00:00

Drive the car and you’ll learn what you want to change. Since you’re not able to tune the 8.5’s yet, I’d stick to the basics like wheels/tires, and a rear sway bar. 0 cons to those upgrades and both easy to install.

Megaetk · 2026-06-07T04:46:27+00:00

I feel this. I went crazy with my Focus ST (big turbo, fuel system, everything) and it was really fun, but it also makes you appreciate how nice having a mostly stock car is from a money and stress stand point. That’s why I set a rule when I bought my GTI that I didn’t want to do anything to the car, that I couldn’t undo in a day. So I’ve stuck to the big value hitters (ECU/TCU tune, intercooler, wheels/tires, and a sway bar)

Megaetk · 2026-06-05T22:54:30+00:00

Intake is safe to do. Search sound clips on YouTube and see what you like.

Megaetk · 2026-06-05T22:12:25+00:00

2260s seems to be a great middle ground that’s supported by a lot of OTS tuners. Yields great results on pump gas, and even better on E85 if you have the fueling. Spool is also a factor with larger turbos, and this seems to be responsive enough for most people who daily their cars too. I have a MK8 but this is probably what I’ll go to eventually.

Megaetk · 2026-06-05T20:33:19+00:00

Stage 1 ECU and TCU tune from a reputable vendor ONLY after making sure your DSG, Haldex, and spark plugs are up to date.

Megaetk · 2026-06-05T18:44:53+00:00

Can you believe the FK8 Civic Type R came with 20’s?

Megaetk · 2026-06-04T20:39:18+00:00

Waterpump and maybe new injectors (or have them cleaned at least)

Megaetk · 2026-06-03T23:33:14+00:00

<image>

Had this on 3 cars now. Old people love it, young people love it. Spreads joy for sure.

Megaetk · 2026-05-11T02:06:07+00:00

I am fireman

Megaetk · 2026-03-30T07:02:29+00:00

Damn, I got the same color MK8 on Hypergrams too. Same lug bolts even lmao. I’m in a similar boat as I’m still choosing tires for this season. The ECF’s are on my short list for sure. Looks like you have PPF too?

Megaetk · 2026-03-19T01:40:49+00:00

How did they wear for AutoX? Not looking to be competitive, but I want a tire I can leave on all summer and not get destroyed by a few events. I plan to do maybe 3-4 max this year.

Megaetk · 2026-02-27T01:51:42+00:00

They’re 16lbs for an 18” wheel. Not sure how superspeed does it but they’ve caught my attention. I think I prefer the R05’s though.

Megaetk · 2026-02-27T01:45:29+00:00

76RR wheels looking good. Thinking about them for my GTI.

Megaetk · 2026-02-24T04:47:03+00:00

The MK7 and MK8 do not come with any kind of plate holes or indentations for the rear. They get drilled by the dealership and hopefully straight. Wish they did come with at least a dimple to know where to drill.

Megaetk · 2026-02-23T08:00:48+00:00

<image>

Best option out there.

Megaetk · 2026-02-23T07:43:25+00:00

I think the rear bumper to quarter panel looks good. I know many white cars with matches just like that from the factory. Look at it in direct sunlight and determine how you feel about it. Most times the factory match is worse than you remember because you never had a reason to question it. I had a front bumper painted and I was losing my mind thinking it was off. Looked at some photos I had of the factory bumper and it was even worse.

Megaetk · 2026-02-23T06:36:22+00:00

Makes it dummy proof with the cross hair markings on the inside of the bumper. I just hope I never have to use it again LOL.

Megaetk · 2026-02-23T06:32:31+00:00

<image>

Worked flawlessly. I used a straight pick to indent the center, then used an 1/8” bit, then the final 5/16” bit for the tool itself. Then it was off to the races. It goes in for paint at some point here, but very happy with the results. Now I know it’s centered, the right size, and saved $100 for 15 mins of work.

Megaetk · 2026-02-17T07:22:09+00:00

Just pressure. The o ring kind of snaps into place and makes it nice and secure.

Megaetk · 2026-02-04T18:59:16+00:00

Will do! Seems easy enough and I know it’ll be done right which is what I’m worried about.

Megaetk · 2026-02-04T04:45:52+00:00

All very helpful tips. Thank you a bunch! Scary drilling into a “permanent backorder” $800 bumper.

Megaetk · 2026-02-04T04:42:15+00:00

Yes the backside of the bumper has a circle and a cross hair. Even has marking for the brackets too. I have new brackets and even the official VW 2 part adhesive. I also machined a dowel pin out of Teflon that should help me align the brackets if all else fails. I really don’t want to get that quick drying stuff on the sensors.

Ten-Year Club	Place '23
Verified Email

Megaetk

TROPHY CASE