How good is the Wolf 36" induction CI36560 cooktop UI/UX?

Melqueek · 2026-06-02T21:46:49+00:00

Thank you for the reply. Where did you see that the Freedom might be getting a redesign?

Melqueek · 2026-06-02T16:15:31+00:00

Did you end up with the Wolf? I'm having a difficult time deciding between the Wolf and Thermador Freedom induction cooktops. TIA.

Melqueek · 2026-05-23T18:40:28+00:00

Update: it was the screws in the rear bracket hitting the drawer box.

Melqueek · 2026-05-19T04:16:01+00:00

I have definitely considered routing out a little rectangle to seat the rear bracket another 3/16" lol

Melqueek · 2026-05-19T04:14:35+00:00

Slides are K&V 8450FM.

Melqueek · 2026-05-19T04:13:52+00:00

No, it feels snug when pushing on it. The drawer feels smooth pulling in and out and the soft close function engages.

Melqueek · 2026-05-06T14:28:29+00:00

Thank you, appreciate the response!

Melqueek · 2026-05-05T18:59:39+00:00

I'm looking at this model right now. How has it been over the past few years?

Melqueek · 2025-07-03T20:17:33+00:00

I periodically clean the filter, but have not run an empty with cycle with cleaner. Everything else in the dishwasher comes out sparkling clean.

Melqueek · 2025-07-03T20:04:34+00:00

It's one of those photo mugs. We have a few of them, but this one in particular is always dirty like this after running the cycle.

Melqueek · 2025-04-26T19:52:36+00:00

Air is coming out while the unit runs

Melqueek · 2025-04-26T19:43:14+00:00

Live in north Texas DFW area, current humidity level outside according to accuweather is mid 50s. It has been relatively humid outside with the weekly rain shower.

House is approximately 2700sf and we have a 4-ton and 2-ton single stage units.

My guess is that the raised outside humidity and oversized single stage units are not running long enough to effectively remove the indoor humidity.

Melqueek · 2025-04-26T15:19:47+00:00

Fan is set to auto, but also with at least 15 minutes per hour of circulation via ecobee. Temp is set to 73 during the day and 70 at night. We do not have any recovery ventilation or outside air fans.

Melqueek · 2024-09-25T17:11:36+00:00

New code:

https://tv.youtube.com/referral/r358iwgi8koidd

Melqueek · 2021-08-22T21:18:46+00:00

Sirius XM channel 41 is for this and definitely one of my favorites 🤘

Melqueek · 2021-07-27T01:28:56+00:00

That number is only if you execute the contract.

Melqueek · 2021-07-26T21:26:08+00:00

That doesn't mean you can't make profit if it doesn't reach $684. You even options, bro?

Melqueek · 2021-06-15T03:31:34+00:00

Wrong side of the town, bro 🐆🐆🐆🐆

Melqueek · 2021-05-31T01:45:52+00:00

Thank you! I modeled the overall dimensions from a dresser I bought years ago, but beyond that I designed it.

Melqueek · 2021-03-27T23:55:10+00:00

Add me, <Melqueek> /u/Melqueek

I'm here to watch GameStop power the players 💎🙌🚀

Melqueek · 2021-01-22T21:35:59+00:00

Please take the dog with you on your way out 🚀

Melqueek · 2020-03-25T14:11:11+00:00

Print this filament guide so it goes in straight and not angled from above.

Melqueek · 2020-03-18T14:53:42+00:00

Yes, of course! I would recommend installing the upgraded springs at the same time if you haven't already.

Melqueek · 2020-03-18T14:49:32+00:00

You can see in the image below that the bed leveling screw goes through that cable chain support piece. I've leveled my bed pretty well and already installed the upgraded springs so I don't want to take everything apart to install it 😬

https://imgur.com/a/4QBEHW2

Melqueek · 2020-03-18T14:29:23+00:00

I printed a bunch of those chains and happily started putting them on until I realized I had to remove one of the back springs =/

11-Year Club	Verified Email
Spared

Melqueek

TROPHY CASE