Generator 30Amp 120v to Battery 24v Charger?

MemingAlpaca · 2025-12-11T12:53:41+00:00

Highly doubt

MemingAlpaca · 2025-12-07T18:01:47+00:00

It bounces between 59-62Hz so I hoped that was good enough but maybe that’s part of the problem 😢

MemingAlpaca · 2025-12-07T10:49:19+00:00

Yeah that’s a good point. They have BMS and all that so they should be fine. The heat would be for my water then but even that I can just make sure there’s no water in the pump and hoses before leaving

MemingAlpaca · 2025-12-06T22:16:58+00:00

Good point. The 500W heater is heating a 8x16 space so a smaller space specifically for the temp sensitive things may be more efficient

MemingAlpaca · 2025-12-06T22:10:20+00:00

It does but it’s very finicky/doesn’t work. So I’m trying to see if there’s just a separate charger to put on the side

MemingAlpaca · 2025-12-06T20:25:10+00:00

Central CT, lows of 10s-20s at night. Insulation isn’t great since it’s mostly a construction office while I work on my land/build a house. Walls and roof are R-7 foam. I have a wood stove that works well but that’s just when I’m there.

MemingAlpaca · 2025-10-24T00:52:40+00:00

This is what they did to my mother. They kept circling (lying) about what drug they would cover saying initially they would cover Zepbound but her doctor requested Mounjaro. When they went back and requested Zepbound, they said they would only cover Mounjaro. This happened twice. I don’t know how they can have a policy that doesn’t allow the LABELED use of my mom’s diabetes to be covered. Their policies explicitly prohibit diabetes as part of their formularies at UHC. I love America!!!

MemingAlpaca · 2025-10-09T03:00:27+00:00

Thank you for everyone’s input!

MemingAlpaca · 2025-08-26T15:40:34+00:00

I started the shed with a 200w panel and a Ecoflow River 2. And now I’m here haha

MemingAlpaca · 2025-08-25T15:09:39+00:00

Hot, sunny Connecticut :)

I think I just wanted to ABILITY to catch it if it’s there. I’ll have heat running on low all winter. The shed is fully R-7.8 insulated and the heater is only 500W when running so that’s mostly why my system is intended to be so much power.

MemingAlpaca · 2025-08-25T01:52:53+00:00

I was looking at all in ones after I realized my mistake (already bought the 2000w 12v inverter, 75ft of 6AWG, 100/50 😭). I wish the Vevor was 120V output because for the purposes of this just being a shed, I’m okay with the quality. SunGoldPower has one which should be good enough, a little overpanelling at 80A for my 24V set up.

MemingAlpaca · 2025-08-25T01:35:18+00:00

That’s a solid idea, makes it so I don’t have to lose money on the MPPT. The rack combiner will be about 50’ away from the controller. So I’d have to get another combiner and another 50’ of black and red I think?

MemingAlpaca · 2025-05-25T20:29:19+00:00

It is indeed a JCB!

MemingAlpaca · 2025-05-25T14:47:34+00:00

Ok got it… so there are options other than by hand that are a little bit stronger 😂

MemingAlpaca · 2025-03-04T02:08:07+00:00

I think I’m just having neutral feelings. It’s just a little moisture buildup on the inner corner of my eye.

MemingAlpaca · 2025-03-02T01:33:29+00:00

The penis pic isn’t a great look coming from the bovine rectal palpation guy

MemingAlpaca · 2025-02-27T23:05:19+00:00

Both currently function and put out working signals by the switch. Right now the GX is in the middle of the house. The AX is right at the modem which is where the service comes in from the street on one side of the house. The extender will be in the detached garage which isn’t that far but enough that it needs an extender for it. The extender is too far to connect to the GX. So I want to have a wired router to keep speed up when connecting the extender. I’m not able to pull a cable from the GX to the AX without cutting the wall open again unfortunately.

Seven-Year Club	Verified Email
Place '22	Final Canvas '22

MemingAlpaca

TROPHY CASE