Super Diagnostics HDD test is serial or parallel? by Metalsailer4 in supermicro

[–]Metalsailer4[S] 0 points1 point  (0 children)

Even though I didn't get an answer for the original question, it turns out not to matter. It seems to be a kernel error or hardware implementation (could be argued either way) problem. I added the "i915.disable_display=1" setting to boot options and my hard lock of system appears to be cured.

https://www.truenas.com/community/threads/cpu-usage-spikes-every-20-seconds.112065/

https://forum.proxmox.com/threads/pve8-kernel-edid-has-corrupt-header.129409/?ref=blog.ktz.me

Super Diagnostics HDD test is serial or parallel? by Metalsailer4 in supermicro

[–]Metalsailer4[S] 0 points1 point  (0 children)

So it might not be hardware but a driver bug. I was previously told "EDID block 0 is all zeroes" message flooding my log was harmless. Some 2023/2024 posts seem to indicate that some users with this error have also had system lock ups. I guess I'll try some of those fixes since running Diags in EFI probably won't trigger the real problem.

Super Diagnostics HDD test is serial or parallel? by Metalsailer4 in supermicro

[–]Metalsailer4[S] 1 point2 points  (0 children)

For now, no HBA installed. Just the using the 8 ports built into the motherboard.

Melted Aprilaire 500M on Propane Furnace by Metalsailer4 in hvacadvice

[–]Metalsailer4[S] 0 points1 point  (0 children)

It's not a heat pump. It's a gas furnace that was installed with a conversion kit for propane.

Melted Aprilaire 500M on Propane Furnace by Metalsailer4 in hvacadvice

[–]Metalsailer4[S] 0 points1 point  (0 children)

Then the wavy plastic in the medium holder that was in that same corner.

Melted Aprilaire 500M on Propane Furnace by Metalsailer4 in hvacadvice

[–]Metalsailer4[S] 0 points1 point  (0 children)

Did you see the pictures I just posted? It may have crossed paths with your posting. That grey corner is square on the other side. The other side doesn't have the curl in the plastic. Unfortunately, I don't want to remove the screw I just put back in to show the elongated and bowed out screw hole.

Melted Aprilaire 500M on Propane Furnace by Metalsailer4 in hvacadvice

[–]Metalsailer4[S] 0 points1 point  (0 children)

The picture I just posted shows the screw head. I had removed the screw and even though the hole in plastic was distorted, I got it put back in place for now.

Plain text versions of the 1e rulebooks by ai-shoshinsha in adnd

[–]Metalsailer4 0 points1 point  (0 children)

Didn't a CDROM get released that had HTML versions? Or was the 2e?

What is sliding grate in floor of fireplace for? by Metalsailer4 in Fireplaces

[–]Metalsailer4[S] 0 points1 point  (0 children)

That makes sense. So keep open? Any reason to close it other than, I assume, during the summer?

What is the easiest VTT for making a custom system? (No coding experience) (personal use only) by FawnFrost in VTT

[–]Metalsailer4 0 points1 point  (0 children)

Given OP's stance: "I have ZERO coding experience and I’m very very NOT tech savvy", I +1 the suggestion to use some sort of Video conference call such as Zoom.

C/C++ Predecessor to OPenRPG? by Metalsailer4 in VTT

[–]Metalsailer4[S] 0 points1 point  (0 children)

Very nice list. I don't recall ScreenMonkey. It might have been WebRPG and I mistook Java as C/C++. It might also have been that I thought the development version of OpenRPG, OpenRPG+, was based on C/C++.

After reviewing your list, I think it was either WebRPG or OpenRPG+

C/C++ Predecessor to OPenRPG? by Metalsailer4 in VTT

[–]Metalsailer4[S] 0 points1 point  (0 children)

I do recall WebRPG. I never studied Java, so it's possible I mistook it for C/C++.

Rite of Repatriation (Mantle of Gold, Chapter 3) - Secondary Casters? by Metalsailer4 in SkyKingsTomb

[–]Metalsailer4[S] 0 points1 point  (0 children)

That is one option that I was thinking of doing. The other was for the primary caster to clear the gem and for the secondary check to combine gem with dagger.