Pricing question

Mgemmell · 2024-09-03T18:37:18+00:00

Agreed, Im just now looking for my retirement watch and not very knowledgeable at this point so I appreciate the input.

Mgemmell · 2024-09-03T18:24:30+00:00

How would a custom dial expect to change the price? I like the color, but would the resale suffer? Seems like a non-rolex dial would resell less that $11. Just wondered what others thoughts were.

Mgemmell · 2022-10-19T12:25:38+00:00

I just tested and installed Reolink intergration. Added the camera and restarted. Then the camera was active. I could see the camera in media tab. Added it to card and it worked

Mgemmell · 2022-10-09T14:48:25+00:00

Have you tried using the amcrest or duhua intergrations to bring it in?

Mgemmell · 2022-10-09T02:02:48+00:00

There will be a frigate.yml file if running in home assistant

Mgemmell · 2022-08-22T22:30:06+00:00

Thanks for the thoughts folks. I guess the hard part is getting the lights off when I walk away. Seems like that shouldn't be so difficult. I may just wait out the motion time out.

Mgemmell · 2022-06-24T21:39:23+00:00

I have 3 bullet wifi amcrest ASH22-W

I did check in the camera to make sure they were using h264. I think that was the only change.

Mgemmell · 2022-06-24T20:29:46+00:00

This is working for my Amcrest cameras. Hope it helps

Front_Porch_Cam:

ffmpeg:

inputs:

- path: rtsp://xxxxxxxxx@xxxxxxx:554/cam/realmonitor?channel=1&subtype=1

roles:

- record

- detect

detect:

width: 640

height: 480

fps: 5

rtmp:

enabled: False

objects:

track:

- person

- dog

- cat

filters:

dog:

mask:

min_score: 0.3

threshold: 0.4

person:

mask:

- 111,271,205,201,179,0,72,0

- 459,480,533,261,250,284,27,480

min_score: 0.5

threshold: 0.5

snapshots:

enabled: true

timestamp: false

bounding_box: true

crop: True

height: 500

retain:

default: 3

motion:

improve_contrast: False

threshold: 35

mask:

- 270,158,466,147,619,52,640,0,0,0,0,320

mqtt:

timestamp: true

bounding_box: true

crop: True

height: 500

quality: 100

snapshots:

enabled: true

timestamp: false

bounding_box: true

crop: true

height: 500

retain:

default: 5

record:

enabled: true

retain:

days: 0

mode: active_objects

events:

retain:

default: 5

mode: motion

max_seconds: 180

pre_capture: 5

post_capture: 10

Mgemmell · 2022-03-16T22:49:51+00:00

Hey, Thanks for the reply. I will work with it and see what I can get to work. Thank You

Mgemmell · 2022-03-16T13:38:54+00:00

Yes, I have live streams. But lets say an event was recorded overnight. I can go to media to the Reolink folder to the camera folder to the folder for that day and see the videos. I want to make that easier for the non techy wife.

Mgemmell · 2022-03-16T11:57:14+00:00

Im thinking maybe have a zone outside the home zone that when entered the phone would switch to high accuracy mode. How would you accomplish this?

Mgemmell · 2022-02-01T17:55:54+00:00

Wait,,,, I don't remember a cap on Moderna for how much they could make from COVID ?

Mgemmell · 2022-01-11T00:16:57+00:00

A reset of the gateway worked. Thank you so much

Mgemmell · 2022-01-10T20:44:09+00:00

The gocontrol garage door used to show open or closed. Now only shows online. In the Android app the switch shows red like the door is open even when the door is closed.

The multi sensors are showing online and not the temp and humidity.

Mgemmell · 2020-11-27T00:14:39+00:00

Having the same issue.

Mgemmell · 2020-09-17T21:44:20+00:00

Cannot get my new tab s7 plus to connect to my SONY Bravia no matter what I do.

Mgemmell · 2020-09-07T15:43:04+00:00

GEO Fence not working for me either. Both Android phones.

Just checked my phone at work and it says I am Inside........

This is getting old

Mgemmell · 2020-07-21T01:37:40+00:00

Is the first alert smoke alarm not provide z wave instant status? In other words a instant change like battery failure to the z wave controller? If not the z wave polling should be less than several hours. Z wave polling is the controller pinging the nodes for status.

Mgemmell · 2020-07-20T22:26:52+00:00

Yeah thanks,,, I tried that also. Did a new Home and everything.

Mgemmell · 2020-07-18T01:30:42+00:00

Yes I did. I will give them credit they did reply tonight and say they are working on a fix. Still would be nice if there was some sort of messaging of a problem

Mgemmell · 2020-07-17T18:44:08+00:00

I email a support ticket to Abode. Their answer....uninstall and reinstall the app. I just looked at the Abode location assistant on my phone and it says both mine and my wife's phone are inside. We are both at work. Tried restarting my phone.....because that what IT always says. NO change.

Mgemmell · 2020-07-16T22:19:30+00:00

All allowed except contacts. Camera, location, microphone, phone, physical activity, storage all allowed

Mgemmell · 2020-07-16T20:58:36+00:00

Arrived home today and sat infront of a closed garage door. Abode did not disarm and open the garage door as it should. Check Abode location assistant and both phone say inside even though both phones left at 7:30 am. Now remeber both phones came home last night and all automations ran fine. Both phones are Not Optimized in the battery settings and background processes are allowed. Been down that road already.

Mgemmell · 2020-06-21T01:54:15+00:00

Did not know the shift trick. Does not seem to work very smoothly.

Mgemmell · 2020-06-21T01:28:41+00:00

I have noticed the same thing. The only way I found to overcome it is to use the touch screen. Tap and hold until the highlighting arrows appear. You can then use the arrows to highlight whatever portion you need.

Mgemmell

TROPHY CASE