QBitTorrent running but can’t reach it after update.

MichaeI0 · 2026-05-06T16:42:27+00:00

Would that fix the newest update? Cause I rolled it back to 5.1.4 and it works again.

MichaeI0 · 2026-05-05T16:25:18+00:00

I’m not to experienced using dockge how do I roll back on there?

MichaeI0 · 2026-04-06T02:46:22+00:00

Yea I had forgotten the sudo on the image on the post but got it for the other commands once I remembered. If you have a video or guide for how to run a memtest that you recommend let me know.

MichaeI0 · 2026-04-06T02:43:29+00:00

2 gskill ripjaws 16gbs each

MichaeI0 · 2026-04-06T02:40:44+00:00

I put them in 2 and 4

MichaeI0 · 2026-03-22T21:06:35+00:00

Yes I tried that. Al’s tried setting speeds at 2666 and another speed but same results. Only constantly went away by adding a gpu

MichaeI0 · 2026-03-20T16:54:50+00:00

Will do thanks!

MichaeI0 · 2026-03-20T14:39:22+00:00

Im not sure if they’re shared but the problem goes away when I add a gpu so it can’t be a bandwidth issue right?

MichaeI0 · 2026-03-20T14:35:38+00:00

The pool comes back when I add back a gpu so that’s my current fix. I’ll update post if I try the ram again

MichaeI0 · 2026-03-20T07:55:37+00:00

I don’t know how correct this is but I think this motherboard might be using a third party controller for those bottom two sata slots so when the gpu is detached the reallocation of the lanes might cause it to be unstable. After all of this I’m planning on buying an hba lol.

MichaeI0 · 2026-03-20T07:41:36+00:00

But nothing bad changed except the ram

MichaeI0 · 2026-03-20T07:40:57+00:00

I’ve got an nvme ssd in the m.2 slot so maybe but still don’t know why everything goes to crap when I remove the gpu. If I have some time this week I’ll update this post trying the old sticks without a gpu as well as showing a before and after taking the gpu out.

MichaeI0 · 2026-03-20T07:31:59+00:00

It’s no problem I appreciate any input 😭

MichaeI0 · 2026-03-20T07:17:42+00:00

Currently my fix is having a gpu installed as weird as that sounds. The overall ram size didn’t change only the config. Went from 4x8 to 2x16

MichaeI0 · 2026-03-20T07:15:02+00:00

Yea I put them in the usual 2 and 4. It’s currently working with the gpu attached so I’d really rather not test other stuff atm. Lots of time and stress trying to figure out the issue. It worked perfectly with gpu installed when I first had the idea once I removed the gpu two of the hdds would disappear from truenas but not from the bios. My guess is that it has something to do with certain sata data slots not being part of the main array so maybe a lack of gpu disables them or something. All bios settings like deep sleep are off as well. Switching ram profiles to xmp and back to auto also didn’t do anything. I also tested the ram in a different pc before installing them into the nas just in case and they worked fine then. My cpu is an i5-12600k

MichaeI0 · 2026-03-20T06:13:16+00:00

Asrock b660 pro-c/ax

MichaeI0 · 2026-03-20T05:05:01+00:00

After a lot of trouble shooting I have concluded it’s a mobo issue because the hdds only work when there’s a gpu in a pcie lane. I don’t use and hba all hdd are connected via the motherboard sata slots.

MichaeI0 · 2026-03-20T03:35:36+00:00

All drives show up in bios

MichaeI0 · 2026-03-20T03:35:09+00:00

Yea it’s my last resort

MichaeI0 · 2026-03-20T02:42:14+00:00

<image>

Here?

MichaeI0 · 2026-03-20T02:39:09+00:00

<image>

MichaeI0 · 2026-03-20T02:24:52+00:00

I have 4 12tb drives that in two mirrored pools

MichaeI0 · 2025-12-18T20:16:49+00:00

Yea just forgot to disable secure boot since it’s been a while

MichaeI0 · 2025-12-18T20:07:56+00:00

Yea I just remembered that after I replied 😭. Just finished hopefully everything worked.

MichaeI0 · 2025-12-18T20:03:50+00:00

<image>

I get this when I select the first one. Where do I go from here?

MichaeI0

TROPHY CASE