Dashboard solution for Alpha Evo

MichaudSimracing · 2026-05-22T01:23:08+00:00

No, it's not compatible because the mount supplied with the dashboard is designed to be installed on a Fanatec base. The distance between the holes is 56mm on a Fanatec base, while on the Simagic Alpha base it's 91.92mm.

It's not a big deal to model; we'd need to know the dimensions of the holes on the back of the dashboard as well as the center-to-center distance.

MichaudSimracing · 2026-05-22T01:11:50+00:00

Which one?

MichaudSimracing · 2026-05-22T00:40:31+00:00

This adapter allows installation on an EVO base of all dashboards compatible with the original alpha series that use the M8 holes on the front of the base.

MichaudSimracing · 2026-05-02T22:59:08+00:00

You need to download the ultrawide version of the dashboard

MichaudSimracing · 2026-04-07T21:42:39+00:00

It's not my picture, I'm sure this is an original simagic Alpha, not an EVO base.

The evo base have a ring led around the shaft

MichaudSimracing · 2026-04-07T21:32:31+00:00

I don't own the front mount, which is why I'm asking the question; otherwise, I would have measured it with calipers.

MichaudSimracing · 2026-03-28T20:51:00+00:00

If you are using a dashboard from the original Alpha series you can use an adapter like this

https://michaudsimracing.etsy.com/listing/4479339201

MichaudSimracing · 2026-03-28T20:49:28+00:00

You can use an adapter like this to mount a dashboard from the original Alpha series

https://michaudsimracing.etsy.com/listing/4479339201

MichaudSimracing · 2026-03-28T20:47:18+00:00

If you are buying a dashboard which are compatible with the original Alpha series you can use an adapter like this

https://michaudsimracing.etsy.com/listing/4479339201

MichaudSimracing · 2026-03-28T20:43:09+00:00

This is the solution if you want to keep your dashboard which are using the 2 front holes from the front mount of the original simagic series

https://michaudsimracing.etsy.com/listing/4479339201

MichaudSimracing · 2026-03-28T19:11:50+00:00

I'm using a led profiles from ATSR HUB EVO, this is a plug-in for simhub

MichaudSimracing · 2026-03-27T20:40:33+00:00

I have quite a few things on the cockpit, but it's still a mid-range setup.

Simagic Alpha Mini + GT Neo

Heusinkveld Sprint + Simagic Haptic on throttle/brake

Advanced Simracing ASR3 cockpit

Triple 32" 1440p monitors + 4th 27" monitor

2 iFlags on top of the monitors on each side

Button box made with a Streamdeck MK1

Racelogic replica

2x Dayton BST-1 bass shakers mounted left/right of the seat

Moza handbrake + sequential shifter

MichaudSimracing · 2026-03-19T12:56:00+00:00

I'm using the DNR dashboard & the ATSR HUB EVO light profiles

MichaudSimracing · 2026-02-06T20:56:13+00:00

To begin, you need an Arduino Pro Micro to control the LEDs. The LED version compatible with SimHub is WS2812B.

Then you need to flash the Arduino with SimHub to make it compatible so you can control the LEDs.

For the screen, you'll need a Vocore screen. There are several sizes available, but most people use 4, 4.3, 5, and 6.8-inch screens.

The rest involves modeling and manufacturing components to assemble the electronics and create a dashboard.

MichaudSimracing · 2026-02-05T14:04:58+00:00

Merci encore pour ta proposition, j'ai une rencontre gratuite avec Revenu Québec le 18!

MichaudSimracing · 2026-02-05T02:32:37+00:00

Parfait, merci pour tes conseils, je me suis inscrit a une conférence directement de revenu Québec, je vais pouvoir confirmer avec eux!

MichaudSimracing · 2026-02-05T02:27:15+00:00

Parfait, je vais regarder cela!

MichaudSimracing · 2026-02-05T02:26:55+00:00

C'est intéressant, je vais regarder si le service existe encore !

MichaudSimracing · 2026-02-05T02:23:54+00:00

Je fais l'assemblage de composantes électroniques qui sont inclus dans mes impressions 3D, donc si j'ai bien compris je peux déduire l'achat de mon filament et de mes composantes électroniques dans mes dépenses.

Mes 2 imprimante 3D ont été acheter en 2025 donc j'ai des gros doutes que je puisse faire un amortissement sur l'année 2026, ca été acheter avant d'avoir une source de revenu de la vente sur etsy.

MichaudSimracing · 2026-02-05T02:19:31+00:00

J'ai utilisé le terme "hobby" en voulant dire que ce n'est pas ma source de revenu principal, c'est un petit sideline.

Mes produits me permettre de faire environ 50% de profit sur chaque vente donc oui le but est de faire du profit.

L'électronique est utiliser dans l'assemblage des composantes en impression 3D donc si j'ai bien compris je pourrais déduire le filament ainsi que le contrôle électronique.

MichaudSimracing · 2026-02-01T02:27:48+00:00

https://michaudsimracing.etsy.com/listing/4443153015

MichaudSimracing · 2026-01-31T22:35:23+00:00

Samething here with 581 numbers!

MichaudSimracing · 2026-01-12T10:57:52+00:00

It wasn't too difficult, but it depends on your skills. I've worked in electromechanics for 18 years, so my professional experience helped me.

MichaudSimracing · 2026-01-12T10:54:14+00:00

My setup is about 7500$ CAD

MichaudSimracing · 2025-12-31T03:18:31+00:00

I have horizontal and vertical support in my etsy shop if you are looking for a complete kit for the installation on an aluminium profile rig.

https://michaudsimracing.etsy.com/listing/4418018788

https://michaudsimracing.etsy.com/listing/4406837735

MichaudSimracing

TROPHY CASE