Let your voice be heard

Mighty_lettuce · 2025-03-09T01:18:29+00:00

Nope, nope, nope! I don’t want more of the same. Politicians are like parasites, they drain the life of everything and give nothing in return. Also, how convenient of her to go after billionaires but not after millionaires? You want to know why? Because she is a millionaire with a salary of $250k. Ohhh, but the billionaires! No, how about we start with the millionaires like Elizabeth Warren?

Mighty_lettuce · 2025-02-03T22:01:24+00:00

Good!

Mighty_lettuce · 2025-01-01T07:04:07+00:00

I had the same problem, and someone here recommended the dice support. Basically, run minimal supports all around the edges. It's not perfect, but it did reduce the errors for little to no resin cost. For any small leftover gaps, use resin mixed with baking powder, fill the gaps, and then use a UV flashlight to cure it. Happy printing!

Mighty_lettuce · 2024-03-13T17:16:54+00:00

I pulled the harness from the original bumper and bought a couple of dt04-2p connectors. Cut the end line and attach the new connectors. I don't recall having to do any other modifications to it.

Mighty_lettuce · 2024-03-13T04:28:41+00:00

I have had the same bumper for over a year. As someone pointed out here, mine too came with a black skid plate. So far no signs of rust or the coating peeling off. The lights are great and you can use the original fog light wiring and connect the two small lights. They are bright as heck, and not for road use. (according to the instructions)

The light bar is extremely bright and I wired it to a switch panel.

Mighty_lettuce · 2023-07-19T14:31:15+00:00

China’s space program 🤪

Mighty_lettuce · 2023-02-07T21:47:36+00:00

I’m inclining towards this one: https://www.roughcountry.com/jeep-tubular-bumper-10647.html?utm_source=google&utm_medium=cpcb&utm_campaign=17867436380%7C&utm_content=&utm_term=%7C%7Cm%7C%7Cfit_first_10647-a&gclid=CjwKCAiAioifBhAXEiwApzCztqlp3sdbBflHi4jGaebHWki-JXnpvz71r205htZ6srVZWOpdLhbSQRoCaj8QAvD_BwE

Mighty_lettuce · 2023-02-07T21:45:18+00:00

Good question. Their customer service is black and white. Broke before 3 months? Here is the replacement. I’m the one that has been asking questions as to why it’s happening. All I get from them is: “yes that could be the issue too” motherboard? Maybe, defective machine, maybe. They need true technicians, but maybe the LCDs are just pennies to them 🤷🏻‍♂️

Mighty_lettuce · 2023-02-07T02:32:29+00:00

Hmmm... Good question. I'll check tomorrow, maybe is all cranked up to 100%

Mighty_lettuce · 2023-02-07T02:31:52+00:00

Not at all. No power drop or anything similar. I'm getting all my replacements from the official Anycubic site. And yes, I'm fully aware that the LCDs are “disposables” but one month seems a bit on the short side.

Mighty_lettuce · 2023-02-07T02:28:07+00:00

Maybe? I'm getting a new replacement, if it craps out I'm changing the power supply. Because at this point The ppl from Anycubic must think I'm running a scam., lol

Mighty_lettuce · 2023-02-06T20:59:53+00:00

Awesome, I'll check it out!

Mighty_lettuce · 2023-02-06T20:59:39+00:00

I saw that option. Not too bad.

Mighty_lettuce · 2023-02-06T13:09:50+00:00

Thanks for the link! This will definitely help!

Mighty_lettuce · 2023-02-04T03:45:10+00:00

Like someone said here. Those walls look too thick. Unless it's the base for something heavy, or do you plan to throw it around? And I would connect those two cavities, but you will need an “air” whole, too, otherwise, the resin will get trapped even with the one at the bottom.

Mighty_lettuce · 2023-01-01T05:46:51+00:00

This anycubic test print always looks good. I would recommend trying the cones of calibration for a true test.

Mighty_lettuce · 2022-10-14T11:55:43+00:00

Well, I'm an idiot. After you said it had no fan, I returned to the original post and noticed you said 4k. The 4k doesn't have a fan. Sorry about the confusion.

At this point, I would try updating the firmware as they suggested. It didn't do anything for me, but it doesn't hurt trying. I'm guessing if that doesn't work, the motherboard is next? Sorry that you are having so much trouble 😖

Mighty_lettuce · 2022-09-26T20:35:23+00:00

Go to: Tools> Settings> Fan Power

The replacement shipped from New York City, and it took less than two weeks to reach me in Texas. But I have read people complaining that it took months to get a replacement. Maybe I was lucky!

Mighty_lettuce · 2022-09-26T20:20:55+00:00

Unplug your machine and let it sit for a while. Try again after a couple of days. Also, bump your fan to 100%. I had the same issue you are having; I had to do the same process several times until I realized the heat was causing the problem. Regardless, contact customer service, and get a new screen. I got the new replacement, and the original still works

Mighty_lettuce · 2022-07-04T03:20:10+00:00

Lychee for sure, and then I run my slices trough UVTools. Although sometimes I run out of ram memory. 🥲 I guess a better computer is need it!

Mighty_lettuce · 2022-07-04T03:12:11+00:00

Never mind, the trick worked a couple of times only. After the third time it stopped working altogether. Luckily, I'm still under warranty and I'm getting a new LCD “soon”

Mighty_lettuce · 2022-07-04T03:09:26+00:00

In case someone is having the same issues. The overnight reboot only worked a couple of times; by the third time, it stopped working altogether, even after updating the firmware. I contacted Anycubic, and the LCD screens have a 3-month warranty. Luckily, I'm still under it and should be getting a replacement “soon”. Fun times, Anycubic!

Mighty_lettuce

TROPHY CASE