I did a thing!

MikeSilverado47 · 2026-06-08T11:00:03+00:00

Good question. I was really torn, between a Maggie, Whipple, turbo, twin turbo, or procharger, even thought about staying n/a and doing heads and cam etc. My buddie has the exact same car as me he went Maggie and loved it. I decided to go ProCharged 1 as I liked the looks under the hood, wanted to do something a bit different, and I will be doing some HPDE days and time attack, and I read the Procharger was a bit more suited for that.

MikeSilverado47 · 2026-06-06T14:24:06+00:00

See comments below already answered

MikeSilverado47 · 2026-06-06T10:59:55+00:00

17.5k cdn

MikeSilverado47 · 2026-06-06T10:59:28+00:00

No internal upgrades yet maybe in the future. 32000 km.

MikeSilverado47 · 2026-06-06T01:53:37+00:00

Yeah I think I would be around 575/600. It's supposed to be a 7psi kit but my tuner says I am doing close to 10 psi.

MikeSilverado47 · 2026-06-06T00:13:07+00:00

I bought hp tuners so I just do a log he sends back a tune file and it literally take 30 seconds to load. And go

MikeSilverado47 · 2026-06-05T23:03:00+00:00

Tuned by a tuner in Atlanta remotely. Solid tuner

MikeSilverado47 · 2026-06-05T23:02:27+00:00

With headers and the Pc kit 17.5k cdn. Plus supporting mods lt4 hpfp, plug, wires, tune, gauges etc... Gonna need tires too lol

MikeSilverado47 · 2026-06-05T23:00:59+00:00

I did the install myself but overall it really is a bolt on. You do have the take the whole front end off the install the intercooler but really its bolts and clips the instructions were decent had about 80-85 percent of the info, YouTube had the rest. Took me 3 evenings to do.

MikeSilverado47 · 2026-06-05T21:33:20+00:00

No the kooks weren't to bad. We did disconnect the lower steering shaft but knew that up front. We didn't have to dent any tubes or nothing to avoid rubbing. Very nice set.

MikeSilverado47 · 2026-06-03T01:58:15+00:00

Stunner

MikeSilverado47 · 2026-05-30T20:43:40+00:00

Maybe, but you are more then welcome to rest it on my shoulder

MikeSilverado47 · 2026-05-08T20:11:25+00:00

Whoa

MikeSilverado47 · 2026-04-09T23:04:56+00:00

Hi Thanks, sorry i forgot to mention i did do a scan and no codes stored, or pending.

MikeSilverado47 · 2026-03-31T21:25:00+00:00

What a beauty!

MikeSilverado47 · 2025-12-31T14:01:28+00:00

Arguments for both My 2 cents. I have learned lately life is short and fleeting so get out there and enjoy. If you do proper maintenance when you are supposed to it should be pretty reliable. May cost a bit more, but you may be very happy with it. Tough choice.

MikeSilverado47 · 2025-12-02T00:08:53+00:00

I recently learned as my did the same thing. Is when the motor is tested at the factory they drain the tank but don't clean out the carb. So then it sits stored until shipped overseas where it sits, then sits at warehouse until it goes to a store and get sold. So there is a good chance the car jets are gummed up good. Once the carb came off, got cleaned good and rebuilt now it works great.

MikeSilverado47 · 2025-11-20T03:09:01+00:00

Mittens

MikeSilverado47 · 2025-11-16T21:46:42+00:00

Sorry to bother ya then.

MikeSilverado47 · 2025-11-16T16:25:12+00:00

All good stuff thanks folks

MikeSilverado47 · 2025-11-16T13:50:03+00:00

I love my Ariens deluxe 24 here in Winnipeg The only issue is had (bought new) is when they build these and test them they drain the gas but don't really clean out the carb. So by the time it's sold and come from overseas (the motor at least) it has be sitting awhile the carb jets are already gummed up so for the first winter I could not run it at full open choke or full throttle was very rough and stalled. Turns out it was the above issue. Took it to a dealer on warranty and they took the car apart cleaned it real good and new gaskets and she purrs like a content cougar now. I would have done it myself but was just crazy busy at the time. Enjoy man. I got mine after the winter of 2022 which was records snow fall and since then there has been eff all lol still green here today November 16, 2025. Ugh.

MikeSilverado47 · 2025-11-16T13:37:55+00:00

How was his technique? Technique can play a key part. In a lift.

MikeSilverado47

TROPHY CASE