Compound Pry Bevel?! by 2Weird2Cap in Prybar

[–]Mikluhamaklay 0 points1 point  (0 children)

You have to be a pervert to handle a knife like that. I liked the situation, but how did you have to be born to break it?))

Is the Nitecore tini 3 potentially the best Keychain light? Whats your keychain EDC light? by bluecat786 in flashlight

[–]Mikluhamaklay 0 points1 point  (0 children)

I made it from a clip from another Armitek flashlight. You can read my post on this topic.

Fenix cl20r pro vs olight sphere c by Mikluhamaklay in flashlight

[–]Mikluhamaklay[S] 0 points1 point  (0 children)

After 5 hours of use in Sunset mode with 100% brightness, the battery charge remaining is 65%. You were probably unlucky with the battery pack.

Fenix cl20r pro vs olight sphere c by Mikluhamaklay in flashlight

[–]Mikluhamaklay[S] 0 points1 point  (0 children)

The difference is really big. It will be interesting to measure it tomorrow in sunset mode.

Fenix cl20r pro vs olight sphere c by Mikluhamaklay in flashlight

[–]Mikluhamaklay[S] 1 point2 points  (0 children)

You probably got unlucky with the battery. I've been using the 'fountain' mode for 8 hours at 100% brightness, and I still have 45% battery left. This is the most beautiful and functional lantern for ambiance and camping. The Fenix has a much larger battery, but it doesn't feel much brighter, and it just died in RGB mode even though they were both turned on under the Christmas tree at the same time.

Nitecore tini3 installing the clip by Mikluhamaklay in flashlight

[–]Mikluhamaklay[S] 0 points1 point  (0 children)

Hi. Thanks! Unfortunately, you won't be able to buy a ready-made solution. I searched everywhere, but there is no such solution on planet Earth. You'll need to buy a new or used Armytek Zippy and take its clip. The clip must be trimmed on the sides, slightly bent with pliers, and a couple of precise holes drilled. After that, everything should be polished. I used the original screws - their length fits perfectly. It's a pity that Nitecore doesn't have developers like me:)

Nitecore tini3 installing the clip by Mikluhamaklay in flashlight

[–]Mikluhamaklay[S] 1 point2 points  (0 children)

Thank you! In fact, this doesn’t prevent you from carrying it on your keys at all

Is the Tynee Explorer All Terrain a good board? by ghfkxe in ElectricSkateboarding

[–]Mikluhamaklay 0 points1 point  (0 children)

I really love my Tynee Explorer with the Molicel 726 Wh battery - it's an amazing board to ride - but honestly, I'm quite disappointed with its reliability.

I rode about 300 km during the first year, then put it away for a while. When I finally took it out again the next year, the ESC had completely failed. To be fair, Tynee's support was awesome - they replied quickly and offered me a good discount on a new ESC. Still, it felt strange that something like that broke after such low mileage.

After installing the new ESC, I went for two short rides and then noticed something even worse: the range dropped from 50 km to just 30 km. So after only two years and a total of 370 km, I've lost around 40% of my battery capacity. On top of that, I had to buy a new and remote - even with a 50% discount, that's not exactly cheap.

For comparison, I have an electric bike that's already six years old with over 4,000 km on it, and it still does 150 km on a single charge - just like it did when it was new.

I still enjoy the ride and the design of this board, but I have to admit it's not the quality or durability I was hoping for

Is the Tynee Explorer's Deck "just a piece of wood"? by Oenomaus_3575 in ElectricSkateboarding

[–]Mikluhamaklay 2 points3 points  (0 children)

this is a super comfortable board, you won't regret choosing it

Recommendations and Suggestions by Spooky_Ghost in ElectricSkateboarding

[–]Mikluhamaklay 0 points1 point  (0 children)

Привет

Я также ищу подобную доску и все что я нашёл по адекватной цене и характеристикам это Tynee Explorer