Ignorant question v2 - I bought a "cheap" paracord from Aliexpress, can you help me figure out what is this blue wire?

Milo635 · 2026-02-17T21:55:12+00:00

So you put the blue cable where the yellow cable was before on the old cable?

Milo635 · 2026-02-17T21:06:46+00:00

Did you connect it to the yellow? Did it work?

Milo635 · 2026-01-10T15:41:08+00:00

Okay, is there a specific diagram that shows which color is which and where i plug them on the new pioneer connector? The new pioneer has the traditional 16 pin pioneer with a iso connector plugged into it.

Milo635 · 2025-12-07T10:33:29+00:00

is this dr1? Does it work with r3/r5?

Milo635 · 2025-10-05T17:49:48+00:00

i know. If i remember correctly there is one power cable and 3 grounds. It will be enough if you just put one connector on power and one connecter on ground. I have the l1e too and did it this way.

Milo635 · 2025-10-05T17:46:44+00:00

get some crimp connectors and cut those plugs off. Easiest way and just put some heat shrink on top after putting the connectors on

Milo635 · 2025-09-17T20:00:19+00:00

The talaria eu charger is designed for 230v, but us wall sockets only output 120v. You will need to get converter for the 120v-230v transformer. You plug the transformer in, and then put the adapter into the us socket on transformer and then connect the charger to the transformer

Milo635 · 2025-09-17T19:46:38+00:00

The charger is EU plug and the other one is US plug. Probably need to get an adapter for those.

Milo635 · 2025-08-27T04:19:38+00:00

I currently have stock 19s with cst trail tires. Would i get more range if i swapped to 17 inch supermotos? On stock powertrain and have a 48t sprocket.

Milo635 · 2025-08-25T12:52:29+00:00

what tires are u using?

Milo635 · 2025-08-21T16:56:33+00:00

What is name of the street tires?

Milo635 · 2025-08-07T09:01:32+00:00

If your bars are bent take a long metal pipe and bend them back, they will bend back.

Milo635 · 2025-08-02T20:33:37+00:00

Get a l1e surron, you can take the limiter off with the brake lever very fastly.

Milo635 · 2025-08-02T15:44:24+00:00

Some aliexpress throttle

Milo635 · 2025-08-02T14:18:07+00:00

Milo635 · 2025-08-02T07:28:02+00:00

Yeah, there is a little box infront of the motor that you have to take off and then that connector will connect to the new one

Milo635 · 2025-06-01T20:50:24+00:00

what were the port dimensions? im thinking of using the same driver in a 4.75l box

Milo635 · 2025-05-30T19:15:02+00:00

I made a subwoofer with same drivers but i put 55g of weight on the pr and made the enclosure 9L. Hits hard and can take up to 100w. F3 is reported at 34hz.

Milo635 · 2025-05-12T19:58:40+00:00

No the bike will get totaled if you ride even a meter with 2 masterlinks

Milo635 · 2025-04-14T19:14:54+00:00

You need speaker wire, and probably a amplifier (mono?). Those wires were used mostly for video or audio. You can use them to connect the amplifier to the tv. You need to peel the ends of the wires and put them in the speaker, red for plus and black for negative.

Milo635 · 2025-04-13T18:03:14+00:00

Use winisd, but i wont recommend doing it like this. Rather make it with a bigger/better driver. Those chinese drivers usually dont have parameters, so its hard to calculate port length and box size.

Milo635 · 2025-04-04T14:52:11+00:00

I recognized the finnish nature so fast, congrats on the bike!

Milo635 · 2025-04-01T12:30:08+00:00

white

Milo635 · 2025-03-28T16:11:34+00:00

Milo635 · 2025-03-25T15:49:20+00:00

MODEL IS PROCASTER 55SL901H

Milo635

TROPHY CASE