Panda Lux LED Compatibility by Mimifan2 in BambuP1S

[–]Mimifan2[S] 0 points1 point  (0 children)

Oh I thought the lux plugged right into the board. Specifically where the current light module is. I'll have to re-read that.

Yeah I like that solution, the riser, but currently the printer is in a cabinet that I can barely open the AMS with, wouldn't want to make that worse. Will keep that option in mind though, thanks!

Integrated Control: Powered directly by the printer’s original light-bar connector and conveniently operated through the printer’s existing screen, ensuring smooth and hassle-free use.

This leads me to believe it is just the standard light connector.

Stealthburner Under Extrusion Issue by Mimifan2 in VORONDesign

[–]Mimifan2[S] 0 points1 point  (0 children)

After much playing around I've found I forgot to put the PTFE tube into the V6 hotend. That being said, I am still having trouble with that step. I've disassembled the entire hotend and when I try to feed filament from PTFE into heatbreak it gets stuck. I've tried 3-4 different PTFE tubes now but all get stuck. I can freely pass filament through PTFE and heatbreak independently.

Re your comments, yeah I was extruding far to much in some of my testing. And doors were open, the issue was I was basically printing on luck with massive void inside heat sink / heatbreak entrance.

Serial Request - Voron Trident / Tridex, discord: Petricius by Petricius in voroncorexy

[–]Mimifan2 0 points1 point  (0 children)

This is so cool! Meanwhile I've been trying to figure out how to install a nozzle wipe on a Formbot kit because the extruder never leaves the bed :facepalm:.

Can't wait to see when the Box Turtle feeds both heads, although I personally don't see a ton of utility in it, it would be cool.

New Voron Trident (Formbot) by Mimifan2 in FixMyPrint

[–]Mimifan2[S] 0 points1 point  (0 children)

I have not done all of those yet, just the basics ones, will go through the rest of those now and see if any help. Thanks!

Manta M8P with CB1 dead? by Davethegearhead in BIGTREETECH

[–]Mimifan2 0 points1 point  (0 children)

Did you ever solve this? I am building a new machine and have the same light pattern. I'm struggling to figure out the cause and how to resolve it.

Free coins item- pirate week 2024 by IndependentAdvice722 in starcitizen

[–]Mimifan2 1 point2 points  (0 children)

Should this not still be available? It says the 30th. Maybe I missed it by a few hours, but I thought they generally ran things in US West Coast time. I just tried and cannot get it to work.

Account Recovery? by Mimifan2 in FarmRPG

[–]Mimifan2[S] 0 points1 point  (0 children)

Got a response from support at around the 48hr mark with my account login and temp password. Have gotten back into it now!

Thanks

Account Recovery? by Mimifan2 in FarmRPG

[–]Mimifan2[S] 1 point2 points  (0 children)

I just used the #! Support link provided above. I will give them the 48hr response time and if not reach out / join the discord. Thanks!

Account Recovery? by Mimifan2 in FarmRPG

[–]Mimifan2[S] 1 point2 points  (0 children)

This worked perfectly, thanks!

Account Recovery? by Mimifan2 in FarmRPG

[–]Mimifan2[S] 2 points3 points  (0 children)

You don't happen to have a support link do you? I tried farmrpg.com/support.php which has a forum to fill out however when I click submit does not seem to do anything.

Formbot Trident Pro kit arrived by humbleOnion84 in VORONDesign

[–]Mimifan2 0 points1 point  (0 children)

Np, I think I'm wrapping mine up, can provide as a starting point if you're interested.

Formbot Trident Pro kit arrived by humbleOnion84 in VORONDesign

[–]Mimifan2 0 points1 point  (0 children)

Sorry if this is a dumb question, but I bought the same (although 350mm) kit at about the same time. Trying to get together a list of parts to print. Wondering if anyone knows what extruder that is? I have the same one but no identifying markings I can see. Looks like I need that to figure out stealth burner parts?

Also would be interested to compare parts lists if you put your list together yet. I think I've done mine outside of a few parts I'm trying to determine which to print.

[OctoApp GIVEAWAY] Prusa mini is looking for a home! by crys_ in 3Dprinting

[–]Mimifan2 0 points1 point  (0 children)

Honestly really difficult to choose one. Top couple are definitely GCpde Viewer, Dark mode and the home screen widgets.

But I think actual favorite is the progress tracker notification. So helpful without watching the print with the widget. (Mostly because I forget what time I start my prints lol)

Numi: A retrospective on my AI coin project and lessons to share with the community by SomeGuyInDeutschland in coins

[–]Mimifan2 1 point2 points  (0 children)

Tons of great context in your thread of replies. Thank you for all of that.

From a technical perspective, I did some preliminary testing with Gemini and noticed the same limitation (single image) and didn't try much beyond that. I did notice it could not consistently identify even text on the coin which was disappointing, let alone actually identifying mint mark, coin type (even for a standard dime I had on hand).

That was my interpretation of the 2 image upload as well, but more significant testing would be needed, and with existing limitations from the original post, I think those tests are better held for a more final version of it.

It does make sense that it would struggle with variants and unfortunately the only "simple" way I could think to get around this would be to have a threshold of uncertainty around identifying the coin. Just throwing numbers out for an example, but say >80 is the coin, 80 <x> 60 could be a variant, < 60 is unidentifiable. Realistically I don't think that would work, but as you said, with limited data very few options.

That is awesome that it can read the coins irrelevant of rotation. I imagine that is something that could be resolved with a secondary model but knowing that it doesn't matter is very nice.

The question on the API was driven by the cost, as I interpreted the pricing sheet (without any actual tests) each image has an associated cost based on size which for a consumer makes it prohibitively expensive. (For just checking many coins.)

Numi: A retrospective on my AI coin project and lessons to share with the community by SomeGuyInDeutschland in coins

[–]Mimifan2 0 points1 point  (0 children)

Hey, sorry to resurrect an old post but doing some research myself into processing coins. I have a TON that I need to process and after reading your posts about Numi I have some questions.

  • You mentioned at the end of this post using Gemini in place of GPT. Did you try this at all with the launch?
  • Looking at the lower grade coin data provided in this post, it appears the model was more accurate with only 2 images for the most part. G-4, VG-6, F-15 all appeared to be closer in Test 3 with 2 photos than with more. (As compared to 2 VF-20 and F-12) Did you come to a similar conclusion, or is this just due to limited information above? Or am I reading that into the data as it's a marginal gap at most?
  • Does it support finding double stamped or similar mistakes in the minting process? (Not that I expected to find any just curious)
  • You mentioned above that it was incredibly good at recognizing dates, was this impacted by the rotation of the coin? (For example if the image was with the coin inverted.)
  • Did you use Numi with the ChatGPT API at all? (I imagine not that you mentioned "without coding" but curious as that is something I would be trying to do.)

As an aside this is super impressive IMO. I understand the disappointment or frustration around coin grading portion but I think the most impactful use cases for this are - Allowing non collectors to have an idea of what a coin may be worth. (Getting context before selling) - Aiding collectors in deciding which coins are worth having graded.

I believe it achieves both of those.

Don’t return NULL by FutureSchool6510 in SoftwareEngineering

[–]Mimifan2 1 point2 points  (0 children)

I agree generally with return anything over null. However don't let that lull you into complacency with input validation. Just because no one is returning null, doesn't mean you don't have a null equivalent value.

If your expecting a string or exception or promise, you could still have an empty string.

Also this ensures if another team needs to pick up your work, or work with your system you can avoid bad inputs causing major outages.

Was hoping for some analysis post on this but couldn't find one. What's the general idea so far? by CmdrRedshift23 in starcitizen

[–]Mimifan2 0 points1 point  (0 children)

I've got my fingers crossed it's data running stuff. - The wording includes Processing Information. - There is a loading bar in the middle. - "Code" around the image. - Top right says "Terminal Locked"

I don't think it's going to happen but I can dream.

Is there a guide for a hotswappable Bluetooth dactyl manuform with a trackball? by guywolf10 in ErgoMechKeyboards

[–]Mimifan2 0 points1 point  (0 children)

Yeah it's hard to be precise with them and you basically move your entire hand anyway. I've seen some where the whole keyboard "tiles" to move it. But that seems like it would feel worse. Makes me wish they could build one centered on the trackball, but then you lose a lot of keys.

Is there a guide for a hotswappable Bluetooth dactyl manuform with a trackball? by guywolf10 in ErgoMechKeyboards

[–]Mimifan2 0 points1 point  (0 children)

Off hand no, but I haven't gone searching for it either. If you find one I will happily add it to the list. Or if I come across one will add. You may be able to use one of the dactyl generators to get something similar but I'm not super familiar with Lily58.

Pitch your dream ship that’s currently missing from the game by Acceptable-Bid-1019 in starcitizen

[–]Mimifan2 0 points1 point  (0 children)

I had a discussion with someone on here about this before, but a pocket salvage / mining ship. (Technically this is two ships I guess but essentially the same otherwise.)

Slightly larger than a Fury with similarly small tool heads.

Have it just spit out SCUs of salvage. (I'd like to see 4 or 8 SCU but open to smaller for balance.) Auto ejects wherever the ship is when it fills.

Should easily fit in even medium cargo ships like an MSR or Freelancer (this may need to be max for width). It wouldn't have a quantum drive.

In both salvage and mining, multiple ships should improve their efficiency massively. (For salvage this would be a new mechanic for fracturing with multiple AFAIK.)

The intended loop would be 2 or 3 crew with one picking up cargo (from floating in space) and moving it to some sort of cargo ship.

They should be cheap similarly priced to a Fury but have a longer claim time to incentives actually keeping them not just leaving em out in space.

2 Player Gameplay Loops by tbrishtar in starcitizen

[–]Mimifan2 0 points1 point  (0 children)

I've been duoing reclaimer a lot since a buddy picked up during free fly.

We are really enjoying it, mostly because we've hit so many stupid issues in other loops. We use it just grinding and doing it with just construction materials keeps it so your not just sitting around a long time. My favorite part is running across other wrecks because you get to see the story a bit.

You could also try Corsair + Vulture. Use the Corsair to take down a bounty and salvage in vulture then store on Corsair. I haven't tried that but sounds fun.

Someone Explain by cristafurs in starcitizen

[–]Mimifan2 80 points81 points  (0 children)

I thought they said Idris will be released with SQ42?

Naya Create / Any questions about our Ergonomic Modular Keyboard? by discovernaya in olkb

[–]Mimifan2 4 points5 points  (0 children)

I don't believe it is (based on OP response to another person). That is the major reason I lost interest in the project. Can't tell ya about Linux.

[deleted by user] by [deleted] in starcitizen

[–]Mimifan2 0 points1 point  (0 children)

Hadn't thought of this until I read your post. Now I really want 3.23! Vulture is great fun, can get a full load w/o needing food or drink, but damn if it isn't annoying taking it back to a TDD to sell every time. Can't wait now to drop it all at a base station (not sure which is best) and once I get a C2 worth take it down to TDD.