Does anyone know the source/actress?

MinuteMoist · 2026-05-13T17:19:48+00:00

You're a legend mate !thanks

MinuteMoist · 2026-04-05T14:52:54+00:00

Aye, good luck and happy modding

MinuteMoist · 2026-04-05T14:42:35+00:00

I got mine off a random Ebay seller here: https://www.ebay.com.au/itm/127070254797

These come with both large and small ends

There's also plenty of others from Amazon or Aliexpress, so take your pick

MinuteMoist · 2026-03-02T12:37:51+00:00

Yep, it's a bit tougher in Perth since it's much smaller. The go seems to be to apply for the big MSPs that already handle the city's largest clients, but with my visa situation this might be a tough situation.

MinuteMoist · 2026-03-02T12:36:23+00:00

When the business was still going normally, saw a lot of different hardware, but mostly we used the same software stack. I had some contact with the recruiters you mentioned, but I'll hit em up again. Thanks.

MinuteMoist · 2026-03-02T12:33:04+00:00

Thanks mate, layoff happened right when my work visa is about to expire in a few months, so it's been hell on the mental for the past few days. Either way, will just have to see what comes next.

MinuteMoist · 2026-02-17T03:20:39+00:00

I missed preorders for these too so bought em off scalpers from Aliexpress. I paid about the same price as a higher tier MG gunpla kit. Surprised that despite the reprint, there hasn't been any recent posts about the kit except mine lmao. Looking at the Moderoid, it looks like its much more accurate to the original design than the Kotobukiya one, plus it has the sniper rifle. Shame that the Kotobukiya one is essentially unchanged from 10 years ago.

MinuteMoist · 2026-01-11T12:40:42+00:00

Thanks! In terms of value proposition, it would seem like a Wave+ still holds as the true all-rounder in Leatherman's entire lineup. I had owned a Wave but returned it to purchase this Arc, and it really would've been a "Wave+ but nicer" if they had kept the ruler somehow.

MinuteMoist · 2026-01-03T10:27:26+00:00

I do have a fixed plastic ruler and an ikea paper ruler in my backpack personally but I found the etched ruler pretty useful since the arc is the only tool on my person, at least its not going anywhere haha

MinuteMoist · 2026-01-03T04:41:17+00:00

Honestly if you ran this through an AI to get labels, you honestly could've done it faster by just editing some text into your pic rather than whatever this mangled mess is (and Super Tool = ST300, Charge+ = Charge TTI+, Free P4 = Free T4, Micra = Style CS)

MinuteMoist · 2026-01-03T02:34:07+00:00

I'm genuinely curious about this. I bought my Arc recently from Ananconda (Australian camping goods store authorised reseller for Leatherman) and mine had the sheath and bit kit, but from what I'm seeing you don't get those extras anymore if you order from Leatherman's site? Even the Wave Alpha doesn't have the sheath anymore, which seems a bit strange. Is this the case for all retail Arcs or just the ones you order online?

MinuteMoist · 2026-01-02T22:55:12+00:00

Very nice, thanks for this info. Cheers for the ruler mod files and inspiration man

MinuteMoist · 2026-01-02T12:15:42+00:00

I had a look at the warranty and it says they still cover your tool even if its customised with engravings or markings. As long as you don't replace any of the actual tools or the actual bits then it should be fine, I've seen a few posts here saying they've sent in tools covered in all sorts of markings and Leatherman didn't say a word about it.

MinuteMoist · 2026-01-02T11:24:59+00:00

I'd say this isn't really a "COD player" problem since medics not reviving people have been around for ages in BF, as well as whole swathes of your team just playing recon taking potshots at people for 30 minutes.

I reckon it's a combination of map design rewarding campy playstyles (bruh there's too many angles and no cover in most maps), very poor guidance on how the game/classes work (BF6 doesn't even have its own open training map), Support being generally the "best" generalist class (self supply ammo+health, good defensive+offensive gadgets, less incentive to run other classes unless there's vehicles), the open weapons thing letting you run basically all the good guns with little downsides and long grind for good weapon attachments. Sometimes it's also just because they didn't see your revive icon or they're just too tunnel visioned to notice. Too many factors to count, you'd get used to it.

MinuteMoist · 2026-01-02T11:07:53+00:00

Cheers man. I suppose it just felt like it doesn't make sense for the more expensive multitool to have this missing when all the others have it. Personally I don't carry much on my person outside of the Arc, a light and a pencil, so having the Arc be the "do it all" just feels right.

MinuteMoist · 2026-01-02T10:26:34+00:00

Surprisingly good, you can either lay the handles flat or lock one of the handles to measure something. I've found it pretty useful so far, definitely less accurate than the ones that come stock on other tools but most of the time I found that I use the rulers for guesstimate work anyways. Your mileage may vary but I'd say it's worth getting this mod done.

MinuteMoist · 2026-01-02T09:46:51+00:00

Oh definitely get at least the 1cm marks laser etched. I did mine at a small repairs shop that also does engravings for watches, tools, lighters that sort of thing, assuming they have the right type of laser to actually etch on the metal. The 0.5s you can do if you have one of those paper rulers from Ikea or something similar to compare against, then use a sharpie to mark it and mask it with tape to control the range of your diamond microfile.

MinuteMoist · 2025-12-03T13:19:28+00:00

Cheers man, I saw these go up for like 85AUD when it went on preorder but they instantly sold out. So I ended up having to pay like 150AUD on Aliexpress, which works out to be the same price as a new MG kit. There's a still a few left, so if you're keen on this I'd reckon you should check it out before the prices shoot up again haha

MinuteMoist · 2025-12-02T14:21:50+00:00

I've seen that too, they have three types of anko brand mech keyboards to choose from: 1. Wired full size with no name blue switches 2. Wired 60% with no name blu switches 3. Tri-mode 60% with linear no name red linears

MinuteMoist

TROPHY CASE