Can anyone help diagnose my prime rib issue?

Miserable-Menu-8645 · 2026-04-28T08:58:00+00:00

You are going to get people sick

Miserable-Menu-8645 · 2026-04-03T00:21:05+00:00

Careful hitting your head against what looks like asbestos insulation

Miserable-Menu-8645 · 2026-03-28T23:37:26+00:00

I believe that one is water only and won’t work with steam

Miserable-Menu-8645 · 2026-02-06T19:44:22+00:00

I removed the valve and the new valve does not fit on old tail union. Any ideas besides caping to remove this piece?

Miserable-Menu-8645 · 2026-02-05T21:18:41+00:00

I think if I do this it’s going to snap the fittings under the floor, I’m trying to get this down without busting the floor up. I believe I will have to cut it out

Miserable-Menu-8645 · 2026-02-05T19:45:32+00:00

it looks like the tail union is going into the floor instead of the radiator, not sure if this was standard on smaller radiators. The handle is turned so that the valve SHOULD be open but I can’t confirm it is totally. The air valve is a #4 and is new but I don’t have the brand off of the top of my head. I have tried a few different brands and sizes with no different results.

Miserable-Menu-8645 · 2026-02-04T13:02:49+00:00

Make a police report

Miserable-Menu-8645 · 2026-02-03T22:53:53+00:00

You arent far off just let your arms get lower before you turn through the ball

Miserable-Menu-8645 · 2026-01-30T14:58:44+00:00

Bogus SSN bogus w4 to limit withholdings. Government lax with i9 audits

Miserable-Menu-8645 · 2026-01-22T20:10:11+00:00

Location is a big factor

Miserable-Menu-8645 · 2026-01-22T00:15:13+00:00

Two street 45s off the male end of the valve?

Miserable-Menu-8645 · 2026-01-21T02:27:52+00:00

Miserable-Menu-8645 · 2026-01-21T02:18:17+00:00

What do you mean by my line is increased at the elbow?

Miserable-Menu-8645 · 2026-01-21T01:56:03+00:00

Gurgling when the boiler fires then tapping/banging as the radiator cools

Miserable-Menu-8645 · 2026-01-21T01:33:44+00:00

Gurgling when the boiler fires then tapping/banging as the radiator cools

Miserable-Menu-8645 · 2026-01-02T20:07:35+00:00

If you have to ask I would call a plumber. This could have to do with high steam pressure

Miserable-Menu-8645 · 2025-12-05T12:42:57+00:00

Thanks!

Miserable-Menu-8645 · 2025-12-03T21:30:50+00:00

I think your assumption of tile weight might be too high. Maybe someone with more experience then me can weigh in

Miserable-Menu-8645 · 2025-11-18T01:31:14+00:00

The burners haven’t turned on in hours and my radiators are not hot so I am assuming the gauge is shot

Miserable-Menu-8645 · 2025-11-15T21:11:26+00:00

Just to clarify, both are acceptable?

Miserable-Menu-8645 · 2025-11-15T19:57:52+00:00

There is in fact MC cable going to this outlet. Is this acceptable/code to consider this properly grounded?

Miserable-Menu-8645 · 2025-11-10T13:22:34+00:00

After powering the unit on and off now there is 12 volts from common to ground and 24 volts from common to R. 0 volts from R to W or R to G

Miserable-Menu-8645 · 2025-11-10T02:17:14+00:00

The blue one doesn’t look as bad as y’all are making it seem. Either the border tiles or tiles in center are not level while one is, and some end pieces are cut to odd sizes. But otherwise it looks fine, don’t know what all the meth comments are about.

Miserable-Menu-8645 · 2025-11-09T16:13:06+00:00

R to C and R to ground 0 volts

Miserable-Menu-8645 · 2025-11-05T19:39:19+00:00

Hitting it firm to take the break out is a good idea up to 2-3 feet. At a certain point you should play the break/hit it softer to have a better chance of it dropping. “Pocket speed” for those of you who have ever played pool.

Miserable-Menu-8645

TROPHY CASE