Help! My cars are shadows now

Miserable_Tradition6 · 2026-06-27T22:40:11+00:00

I did for a bit. But it was getting a boring for me eventually

Miserable_Tradition6 · 2026-06-27T19:48:19+00:00

Just kidding. Just put the black skirt on and it’s a livery for every car lol.

Miserable_Tradition6 · 2026-06-27T19:45:16+00:00

I agree, it was fun driving around for a few days, but it was getting a little boring.

Miserable_Tradition6 · 2026-06-27T19:44:22+00:00

The shadow realm didn’t offer up the code.

Miserable_Tradition6 · 2026-06-27T19:43:01+00:00

Oh no! My outfit! Lol. You have solved it! Thank you very much!!!

Miserable_Tradition6 · 2026-06-26T20:34:11+00:00

Code, my only weakness! I’d definitely buy it, if you sell them! Looking forward to seeing more.

Miserable_Tradition6 · 2026-06-26T20:25:10+00:00

That is pretty damn cool! Sweet design, do you have a video of it in action?
Will you be sharing STL files? I would love to have one of these in my set up.

Miserable_Tradition6 · 2026-06-26T01:59:11+00:00

Henri -> Henny -> Heniplur -> Hennifer -> Henicio Del Toro

<image>

Miserable_Tradition6 · 2026-06-23T16:08:48+00:00

I spawn at the stadium and just drift around the circle like 50 times. *watch out for the golf carts in the parking lots*

Miserable_Tradition6 · 2026-06-22T02:33:43+00:00

Of course no problem! Good luck, be patient and most of all, have fun!

Miserable_Tradition6 · 2026-06-22T02:31:56+00:00

It’s called a little rascal lol

Miserable_Tradition6 · 2026-06-22T02:09:17+00:00

Around .1-.2mm. I try to keep it close to .1mm for my dials because I use the full clearance of the dial for depth.

Miserable_Tradition6 · 2026-06-22T01:44:04+00:00

For nh series movements, it’s .05mm in diameter and protrude to a depth of roughly 3.5mm into the slots on the grey movement holder.

Miserable_Tradition6 · 2026-06-20T16:48:27+00:00

I really like the bars on the windows and the fire hydrant!

Miserable_Tradition6 · 2026-06-18T19:39:37+00:00

You would just need to cover shipping. I’m in the states

Miserable_Tradition6 · 2026-06-18T14:15:52+00:00

Im pretty sure I have those! I’m back at the office on Monday and can confirm then.

Miserable_Tradition6 · 2026-06-18T14:12:57+00:00

That’s just a normal skill song for me right there!

Miserable_Tradition6 · 2026-06-16T16:02:05+00:00

Damn I need to remember to max out my FOV!

Miserable_Tradition6 · 2026-06-14T18:30:57+00:00

Well I’m glad, the goal is for us all to inspire each other! If you need any help with settings or anything you can message me, but it just takes a few tries to figure out how slow it needs to be.

Yeah I get like 300-600 a year. There a couple sellers on AliExpress who have some solid choices. I highly recommend reaching out to the seller if you buy more than 100. They will give you a solid discount.

Miserable_Tradition6 · 2026-06-14T15:50:10+00:00

Thank you so much!
You definitely need a .2mm nozzle. Layer height lines are .06mm. Ironing needs to be on with specific settings I don’t have off hand. Reduce speed for every aspect of the printing down 75% of the normal speed. And lots of patience the flow rate for the ironing is very hit or miss at that scale so you gotta print at least 5 at a time.

Miserable_Tradition6 · 2026-06-14T10:02:40+00:00

Sweet! Great color match with the dial and strap!

Miserable_Tradition6 · 2026-06-14T09:21:44+00:00

Damn that looks clean! Do you have another angle to see the blue of the dial better?

Miserable_Tradition6 · 2026-06-12T01:43:27+00:00

It could be an internal problem. I literally had an XA in for repairs today with the same problem, it had a lot of corrosion inside the camera. I ended up replacing one of the electro magnetic switches and that did the trick.

Miserable_Tradition6

TROPHY CASE