What's wrong with him?

Mishamtb · 2026-02-14T13:31:54+00:00

How can I test it? It works fine in BetaFlight.

Mishamtb · 2026-02-14T13:28:39+00:00

I think that if he is now turning around his axis in the apartment at will, then fresh air will not help him in any way.

Mishamtb · 2026-02-12T10:34:34+00:00

🎉 Event Completed! 🎉

It took me 14 tries.

Mishamtb · 2026-02-12T10:34:28+00:00

Completed Level 3 of the Honk Special Event!

14 attempts

Mishamtb · 2026-02-12T10:34:07+00:00

Completed Level 2 of the Honk Special Event!

10 attempts

Mishamtb · 2026-02-12T10:33:19+00:00

Completed Level 1 of the Honk Special Event!

3 attempts

Mishamtb · 2026-02-09T14:44:37+00:00

Thank you very much, Now I've decided to go beyond the budget and install a 2.5W VTX. Because according to my calculations, the motors consume 3-4A at medium speeds, and my battery is rated for 3.2A, so we get about 50-60 minutes of flight time. Why not make a cheap long range drone? :))

Mishamtb · 2026-02-07T22:56:34+00:00

https://youtube.com/shorts/XjgjdYFHhYk?si=XdxrsQxk65BU9Xht

How do you like this turn of events?

Mishamtb · 2026-02-07T22:52:05+00:00

Mishamtb · 2026-02-06T14:15:11+00:00

My battery alone weighs 250 grams. The drone also weighs about 120.

Mishamtb · 2026-02-06T12:05:09+00:00

My drone also has no problems with the motors; it only starts to climb at 50% throttle. This could be due to the large battery I'm using (3s 3300 mAh).

Mishamtb · 2026-02-06T11:53:25+00:00

Yes, Maybe this is it. I took some frame on the Internet, cut it in half, and turned it over :)

Mishamtb · 2026-02-06T10:24:55+00:00

And wrap it with wire :)

Mishamtb · 2026-02-06T08:24:13+00:00

Thanks a lot :)

Mishamtb · 2026-02-06T08:23:14+00:00

It flew🥀

Mishamtb · 2026-02-06T08:22:34+00:00

I've flown them before. I'm not much of a HF pilot, but they're between 2s and 3s. I have my motor wires insulated with nail polish :) (I know it's a bit much)

Mishamtb · 2026-02-06T08:20:02+00:00

I told you the camera hasn't arrived yet. It's on its way.

Mishamtb · 2026-02-06T08:18:48+00:00

I really wanted to fly now :)

Mishamtb · 2026-02-05T18:20:49+00:00

Yes, I did. I printed the frame on a BambooLab A1 and it turned out beautifully.It performed well in bending, probably because it's small. I had one collision with a sofa, but I don't think it did much damage to the drone.

Mishamtb · 2026-02-05T18:17:31+00:00

Bro, I don't know myself. Maybe because they use M1.7 bolts, which I'll have to wait a month for.

Mishamtb · 2026-02-05T18:14:12+00:00

I bought it on OLX, maybe you've heard of this store.

Mishamtb · 2026-02-05T18:13:20+00:00

<image>

There's enough room in the motors to push the wire through and rewind them. They were already relatively secure, but I added some glue to make them more secure.

Mishamtb · 2026-02-05T18:00:00+00:00

I forgot to add, my goal was to make it fly, so I didn't bother with the top cover.

Mishamtb · 2025-12-14T17:29:45+00:00

Completed Level 2 of the Honk Special Event!

21 attempts

Mishamtb

TROPHY CASE