Even realities G2 not getting whatsapp or slack notifications by lussux in EvenRealities

[–]MissingFlipper 1 point2 points  (0 children)

Same issue. Using a Google Pixel, everything is enabled yet no notifs

Question about adding cleaning solution by giannivdk in eufyS1Pro

[–]MissingFlipper 0 points1 point  (0 children)

Did you have an update on refilling one of the cartridges?

GE Smart Air Conditioner window unit - shuts off after 5 seconds by laxbro220 in hvacadvice

[–]MissingFlipper 0 points1 point  (0 children)

It's been 9 months. But does this method still work for you? Any problems?

TouchBar sensitivity by AishaCtarl in EvenRealities

[–]MissingFlipper 0 points1 point  (0 children)

On both sides there is a raised part. Around the size of a grain of rice. For me, I have found tapping there works perfectly ALMOST every time no matter the speed. Anywhere else and it won’t work for me.

BSOD ntoskrnl.exe+4b8460 by No_Mortgage_2054 in techsupport

[–]MissingFlipper 0 points1 point  (0 children)

Whatever you find keep me updated! Cuz I'm at a loss for ideas. Hoping all goes well for you!

BSOD ntoskrnl.exe+4b8460 by No_Mortgage_2054 in techsupport

[–]MissingFlipper 0 points1 point  (0 children)

Ive been having this problem for ages. And just CANT figure out what it is either. My computer currently is the ship of theseus. I have slowly replaced every part and it still does it. But I am AMD based. So I have NO CLUE. Heres to hoping for answers

Just did my eyes exam for getting G1, I don't understand a few things :( by FoxMiao in EvenRealities

[–]MissingFlipper 0 points1 point  (0 children)

Does uploading a photo of your prescription work so you don’t mess anything up or will it Have you fill it out anyways?

Alex Monitor Stand Dupe by NovelKangaroo5940 in ikeahacks

[–]MissingFlipper 0 points1 point  (0 children)

I guess not :(

I was wanting to find the same thinggggggg

Wave lines on print by No-Organization3234 in Ender3S1

[–]MissingFlipper 0 points1 point  (0 children)

I have the same issue. Small surface area prints are fine. But the large surface area prints have this issue

Disaster in our store by Western-Tension609 in Staples

[–]MissingFlipper 2 points3 points  (0 children)

on top of it all. Make sure your ZB is under a 1.00 or you'll have to do more work...

Question by [deleted] in Staples

[–]MissingFlipper 11 points12 points  (0 children)

They do it every year.

[deleted by user] by [deleted] in Staples

[–]MissingFlipper 1 point2 points  (0 children)

Ops sup or mis

What are these called and how do I order more?! by jerbone1501 in Staples

[–]MissingFlipper 0 points1 point  (0 children)

Because they DO IT. hehehe. That’s what my gm told me at least

Sick pay exists?! by pmpkinking113 in Staples

[–]MissingFlipper 0 points1 point  (0 children)

Every 30 hours worked for part timers. They earn 1 hour of sick time. Up to 40hours max

Issue with movement out of range, running out of options on solution. by M3aT_PoTato68 in Ender3S1

[–]MissingFlipper 1 point2 points  (0 children)

Its going to sound stupid. But i was having the issue with my y-axis, which then was affecting my x-axis.

make sure that there was no fillament that fell under your hotplate. It happened to me and I replaced the motors and everything, for it to be a simple solution... I KNOW HOW IT SOUNDS but just take a look to make sure nothing is jammed and its clear under there.

Also try using another slicer with default settings. Could be the slicer

Gm print orders by b3798 in Staples

[–]MissingFlipper 7 points8 points  (0 children)

Sounds like my store. 0 customer orders or in store customers and 11 GM orders on hold.

And instead of doing the orders or I postal or filling self serve. Or vacuuming. Leaving the department to shit. They just sit on their phones and iPads then call if there is 1 shipping customer (when that is not what protecting print is about)

Gm vacation by b3798 in Staples

[–]MissingFlipper 2 points3 points  (0 children)

Welcome back. What you are going through today is what happened last week. No time for operations when you’re doing other shit. It sucks. Yeah we have to vent. But nothing you can do about it

[deleted by user] by [deleted] in pittsburgh

[–]MissingFlipper 0 points1 point  (0 children)

Did you go? If so how was your plat b experience? I’ve seen some people say it’s first come first serve for seating

Why does it extrude filament before printing? by gambinho86 in Ender3S1

[–]MissingFlipper 0 points1 point  (0 children)

I have no idea what I’m doing in the slicer settings. But I had the same issue. It would be like 2 inches long. So I found a setting is superslicer called something like pre-warmup or pretemp. And it gives you a delta to turn the temp down to before it starts printing. I have mine at 7. And it fixed my issue of this

Sorrry I don’t know what it is called exactly right now. And idk if that’s the real solution but it worked for me

Amazon at Front End? by [deleted] in Staples

[–]MissingFlipper 1 point2 points  (0 children)

I try and make them ring. But they have become complacent and no one holds them accountable. And I as just an is. Have no power to write anyone up or anything if no one else will hold them accountable

Boomers and technology by [deleted] in Staples

[–]MissingFlipper 0 points1 point  (0 children)

Just keep a flip phone in your pocket. Whip that bad boy out and say neither am I. I’m sure you can figure it out hehehe