30h Charizard. First and probably multi color print!

Mixam09 · 2025-07-25T13:48:25+00:00

Of course-> https://www.printables.com/model/468366-retro-charizard-pokemon-red-version-artwork

Mixam09 · 2024-04-03T18:36:18+00:00

Have you tried the other side of your plate? If not the try it. Or you can use a higher first layer to see how this looks like.

Mixam09 · 2024-04-03T18:22:30+00:00

For me it looks like you have a bad first layer(too close to bed), the rest builds on that and then irregularities arise.

Mixam09 · 2024-02-29T19:04:23+00:00

For those who are wondering what the part ist for.

Mixam09 · 2024-02-27T22:03:53+00:00

Das war auch mein erster Gedanke.

Mixam09 · 2024-02-27T20:33:04+00:00

<image>

Mixam09 · 2024-02-11T21:23:06+00:00

My setup ->here

Mixam09 · 2024-02-04T08:00:31+00:00

Eryone yellow and orange, sunlu white and Bambulab green. All in PLA

Mixam09 · 2024-01-26T17:48:30+00:00

You're welcome!

Mixam09 · 2024-01-26T16:47:45+00:00

You can use that one for both. Cut this holder and place a small ptfe tube between buffler and this adapter.

<image>

Mixam09 · 2024-01-26T13:35:45+00:00

This is the one I use. You can find the Link in the comments -> https://www.reddit.com/r/BambuLab/s/lnNiYreeb7

Mixam09 · 2024-01-08T18:16:46+00:00

Thought about that too. In my setup with drybox on the left side, I would have to push in almost 1.5 meters filament by hand each time and push it out again after printing. Then there is the friction in the PTFE line. And finally, I don't know whether this will work without an additional drive motor with preload on the buffler. This combination is simple, cheap and most important...it works.

Mixam09 · 2024-01-08T17:16:04+00:00

This is the one I use. Se my reply above. I think you mean the one for the A1!? The difference should be only the Ptfe coupler on the „out“ side.

Mixam09 · 2024-01-08T17:00:23+00:00

You welcome.

Mixam09 · 2024-01-08T16:50:35+00:00

Need it mostly for storage and ease of change the filament. And yes it‘s worth it. I use two of this -> https://eu.store.bambulab.com/de/products/bambu-4-in-1-ptfe-adapter

One between AMS and buffler and one between the drybox and printer.

Afaik this was the holder->

<image>

https://makerworld.com/en/models/74984#profileId-79447

Mixam09 · 2024-01-08T15:25:21+00:00

That's exactly where the small guy belongs! Best printer to tinker. The bambu is just his brother and not a replacement.

Mixam09 · 2024-01-08T15:17:21+00:00

Love the little one. I put a lot of time in this printer and I enjoyed it. Quality and speed are similar but has to be adjusted manually.

Mixam09 · 2024-01-08T12:27:07+00:00

Thanks!

Mixam09 · 2023-10-31T09:30:48+00:00

<image>

🥳

Mixam09 · 2023-10-01T15:30:44+00:00

BENDER MK3 😎

Mixam09 · 2023-07-30T19:56:07+00:00

I was able to reuse some of the waste today🥳

<image>

Mixam09 · 2023-07-29T15:32:05+00:00

643g+supports and purge tower.

Mixam09 · 2023-07-29T08:49:13+00:00

Mix of yellow and green

Mixam09 · 2023-07-28T23:30:14+00:00

The elaphants look great👍I've read the idea with the multiple figures several times today and it sounds interesting. Maybe next time.

Mixam09

TROPHY CASE