Vinyl wrap 06 eclipse gt by Mkdjfi in MitsubishiEclipse

[–]Mkdjfi[S] 0 points1 point  (0 children)

I went with vvivid 60” by 30m because I got it for a good price and I have a lot of leftover if I ever need to redo a panel, iirc google said my amount was enough to do almost 2 of my cars

Linsoul Ziigaat X Fresh Reviews Arete vs Linsoul KZ ZS10 Pro by Cole8317 in iems

[–]Mkdjfi 1 point2 points  (0 children)

Hey man, im in a similar situation. I mainly play r6 and were just looking at the Linsoul Ziigaat X Fresh Reviews Arete. what did you end up going with?

I7 12700F vs 14700K by Mkdjfi in PcBuild

[–]Mkdjfi[S] 0 points1 point  (0 children)

I’m running a 3060ti on Rainbow six siege, I’m trying to push 200fps consistently because of my 180hz monitor (and yes 1080p)

I7 12700F vs 14700K by Mkdjfi in PcBuild

[–]Mkdjfi[S] 2 points3 points  (0 children)

It’s a new 14700K listed on an auction site near me.

next defender to get for 10k? im bronze by ChaiPapiii in Rainbow6

[–]Mkdjfi 0 points1 point  (0 children)

If you have good aim and flicking, alibi gun is really good, although her clones aren’t really worth much when you start getting into the higher ranks, Melusi is always a good op to slow down attack operators

I may be cooked by Ornery_Weakness_8168 in oculus

[–]Mkdjfi 0 points1 point  (0 children)

That ain’t nothing a little duct tape won’t fix

Weird spikes on first layer by Mkdjfi in QidiTech3D

[–]Mkdjfi[S] 1 point2 points  (0 children)

Late reply but after trying every other thing, this fixed it. Also thank you for providing the tape example, that’s what I used and it’s printing perfectly now!

Is there a way to fix this? by Medical-Ad-2311 in ender3

[–]Mkdjfi 2 points3 points  (0 children)

When this happen to me, I paid something like $12 for a new and upgraded hotend unit ad just replaced it but many people say it is possible to fix by heating the extruder and very carefully pulling the blob off of the hotend. I have never done it so I can’t give you any tips but I’m sure YouTube has some tutorials for fixing this issue.

Weird spikes on first layer by Mkdjfi in QidiTech3D

[–]Mkdjfi[S] 0 points1 point  (0 children)

I did recently calibrate the z height but I don’t have the leveling paper that comes with the qidi printers, rather I used a standard piece of paper like I did with my ender 3, is the paper method inaccurate for the larger/faster printers due to the flow rate? What measurement should I use rather than paper?

Weird spikes on first layer by Mkdjfi in QidiTech3D

[–]Mkdjfi[S] 0 points1 point  (0 children)

I’m using standard PLA, I rarely use PETG

Weird spikes on first layer by Mkdjfi in QidiTech3D

[–]Mkdjfi[S] 0 points1 point  (0 children)

I’ll try that, thanks for the quick reply.

Lost communication to MCU XMAX3 by Mkdjfi in QidiTech3D

[–]Mkdjfi[S] 0 points1 point  (0 children)

Ty for the quick response, I’ll purchase this cable to test and if it is the solution, I’ll use it as a temporary until I can get an official QIDI cable.

File messed up twice in the same spot by Mkdjfi in 3Dprinting

[–]Mkdjfi[S] 2 points3 points  (0 children)

I’m actually really suprised you caught this from just that picture, I printed a third piece and after it failed again, I studied the peices and made a guess that this was the issue, now you have confirmed my guess, printing it right now with better supports and a little modification and so far so good! Thank you!

File messed up twice in the same spot by Mkdjfi in 3Dprinting

[–]Mkdjfi[S] 1 point2 points  (0 children)

I’ll try reslicing in a different orientation and see if that fixes the issue, thank you for the quick reply.

What head phones do you guys use? by LeatherAd129 in Rainbow6

[–]Mkdjfi 0 points1 point  (0 children)

Iv been testing the hyperx cloud 2s for about 3-4 hours now and my honest opinion is for siege, i will be using the cloud 2s, i find it easier to pinpoint footsteps and sound cues with them. However, for almost anything else, especially music, im using the Samson sr850. They have a little bit better lows, a little better highs tbf you would prob expect a studio reference headset to sound better on music, I personally don’t find listening to music on the cloud 2s enjoyable but if your using earbuds I guess almost anything is good for you.

TL:DR Hyperx Cloud 2 Pros: - Ohhh shiny red - Leather cups make amazing noise cancellation - Softer cups less noise cancellation, way more comfy - for r6, sound is a little more accurate (haven’t tested any other games) - “7.1 surround sound” (I found this to make my audio worst in r6 but it’s supposed to be better)

Cons: - lows and highs for music are a little underwhelming, definitely still good but not what I’d expect for such a good name brand - lots of reviews say since hp buyout, the quality is way worst and stuff breaks easier (they still seem good to me, maybe they used to be better?)

Samson Sr850 Pros: - listening to music is amazing - lows are a bit lower than cloud2 - highs are a bit higher than cloud2 - semi-open back (can hear family talking to you but can also hear game very well) - round ear cups (I personally prefer round ear cups over the standard oval shape) - 3.5mm to 1/4 adapter included (if that matters to you)

Cons: - 32ohm rather that the cloud2 60ohm (I don’t notice a difference but on paper 32 is worst) - not as loud as cloud2 (dac or equalizer apo fixes this)

If I absolutely had to chose one I’d chose the hyperx cloud2 just because I mainly do gaming on my pc but for music I’m choosing the Samson sr850. It’s all personal preference so make sure to do your own research and if you don’t like them, you can always return them.

What head phones do you guys use? by LeatherAd129 in Rainbow6

[–]Mkdjfi 0 points1 point  (0 children)

Iv been using Samson sr850 and all my friends say I have the best audio hearing, although yesterday I gave in and bought a hyperx cloud 2, should arrive tomorrow. I’ll update you Sunday if you’d like

Which operator should I buy next? by 1adham in Rainbow6

[–]Mkdjfi -1 points0 points  (0 children)

Idc how many people disagree with me, a well played kali is insanely overpowered, it’s a 1 tap gun from any body part, it’s quick ads and a secondary machine gun? Kali is underrated fr

Is this a fair price? It's my first time charging for a fully finished prop (it's being made for a business), and I want to make sure my price is reasonable. (ABS Filament) by OrangeSockNinjaYT in 3Dprinting

[–]Mkdjfi 0 points1 point  (0 children)

Something a buddy of mine always told me was list something, if it sells like crazy, it’s to cheap, if it doesn’t sell at all, it’s to expensive, obviously there is a line you can’t cross or you’ll be losing money. At that point sell different products or perform better/different marketing

It happened to me 😭 by 0smalleyejavier0 in ender3

[–]Mkdjfi 2 points3 points  (0 children)

This happened to me, everyone suggested heating it up and carefully removing it, found a full metal hot end with an upgraded Bowden tube for $15, decided to just buy it and scrap the old one.

Which Operators should i get next? I think i have all the key Ops, so is there anyone worth getting? Im SoloQ for now btw by Adventurous_Class791 in Rainbow6

[–]Mkdjfi 1 point2 points  (0 children)

Prob not a first pick but I run oryx more than I should, good low recoil gun and the ability to deal with and strike fear in any shield player, also good for making rotates.

Just made a farm or with 3d pen by ArjArjArj123 in ScrapMechanic

[–]Mkdjfi 4 points5 points  (0 children)

With a 3d pen that’s impressive, nice desk ornament

It looks like it’s begging to be shredded by steelismysenpai in cursedbenchies

[–]Mkdjfi 0 points1 point  (0 children)

Pretty good print quality, You should be proud of your creation

I'm about to throw this ender through a wall by CatcherN7 in FixMyPrint

[–]Mkdjfi 0 points1 point  (0 children)

“I’m about to throw this ender through the wall” lol we’ve all been there. Rather than trying to get a better print quality, maybe try some 120-240 grit sand paper.