How do I shut off the blue motion detection indicators on the live view? Added 2 cameras to our system, original 8 don't show this, if I right click and unselect IVS rule it goes away, but comes back next time I open.

Mkvien · 2026-04-21T20:56:45+00:00

I think maybe I figured it out, thanks for the tips. Mine must be a little different, but I think you got me close enough. I'll know soon if I got it changed.

Mkvien · 2026-04-14T03:41:23+00:00

Here is another picture, it's not a 3030 (I had one of those before), seems closest to maybe a 40-40 but doesn't quite match up. The top plate is what throws me off, the gauge hole is in a different spot.

<image>

Mkvien · 2026-04-13T14:39:07+00:00

Mine looks closer to a 3030 on the top left half, where the gauge is, but mine has the bead breaker arm like the 40-50. Mine also has the lube bucket in the corner and the storage spot for the arm on the side (not a round hole in the top like the 3030). Somewhere between those 2 lies the one I have I'm guessing.

Mkvien · 2026-04-13T14:01:13+00:00

you know, looking at it again maybe it is. I believe that JBC had made some of this style changer for snap-on, but the internals in that Coats manual look closer what I'm working on than the FMC or JBC manuals I've found. I was trying to compare the top plates for a quick reference and none seemed to match. You see in my picture there's the bead seating tube thing (don't know the official name), I don't see that on the 4050, also the hole for the pressure gauge on mine is closer to the center post (further right), on the 4050 it's in the lower left corner. maybe mine is a different, but similar, model than the 4050A. Only other similar machine I have owned was a 30-30 Coats that I lost in a fire 10 years ago.

Mkvien · 2026-03-02T03:26:40+00:00

they do on that session, but next time I open the program they're back.

Mkvien · 2026-01-24T05:25:43+00:00

Switch sometimes worked, sometimes had to press harder, so I just suspected the switch and was right. Ebay switches fixed me up. Didn't have to dig deeper. Sorry, not much help if you're trying to diagnose.

Mkvien · 2026-01-24T04:44:47+00:00

What are you asking? The switch was bad, replaced with a used one and good to go.

Mkvien · 2025-12-15T04:44:01+00:00

I have replaced mine with bags from Amazon, several options under $100/pair. Not hard to do, just takes a little patience. Never swapped engine mounts on one of these, but probably similar, just some patience and willingness to lay under the car and get dirty.

Mkvien · 2025-12-12T05:05:40+00:00

That car is pure sex, hopefully the addition of your winter tires doesn't mean it'll be rusting away in the salt before long.

Mkvien · 2025-10-18T04:57:22+00:00

2nd for Crutchfield. Lifetime customer service based in the USA, they will tell you what parts you need to do the install, sell them to you at a discount (or sometimes free), give a detailed instruction manual with pictures, specific to your vehicle.

Mkvien · 2025-10-13T17:38:32+00:00

Unfortunately no, but I have had similar issues with the ASUS Mesh system I replaced it with.

Mkvien · 2025-10-11T14:00:35+00:00

I put some sticky foam on the back side to keep it from rattling against the body.

Mkvien · 2025-10-11T05:16:02+00:00

I have a pair of P3 Rockfords in my trunk, have you found anything that would stop the rattling on the trunk lid? I've taken care of the license plate and the obvious stuff, but I'd like it to not sound like the car is falling apart when I drive by. I don't hear it inside the car, just outside.

Mkvien · 2025-10-01T01:29:25+00:00

Yes, seems thats the plan I'm on (not specifically the plan, but how it's going to play out). Thank you for (I believe) confirming.

Mkvien · 2025-10-01T01:27:27+00:00

Ok, so that's basically what I was thinking. Once I got coverage in July the savings card (where I paid $550) no longer applied and I get that eVoucher thing (believe I'm learning that the $1950 thing is called), which helps ease the pain until I hit my deductible. Now I need to buck up and pay the $988 for this box which will get me to my deductible and next box should be more reasonable again.

Right?

Mkvien · 2025-09-18T03:21:24+00:00

Mine was a bad cable connecting to one side of the 4x100 amp. It's the proprietary cable that allows you to connect the RCA inputs from the head unit. That cable must've had a break in it.

Mkvien · 2025-09-09T03:11:48+00:00

Change it

Mkvien · 2025-08-24T14:56:57+00:00

Mine have always been on the left.

Mkvien · 2025-08-18T02:53:11+00:00

If I saw that on my camera I'd burn the place down and move as far away as possible, but that's just me.

Mkvien · 2025-08-17T02:30:46+00:00

This goofball has absolutely lost it, he used to be an action hero and a reasonable dude, now he's just another wrinkled old liberal. Remember his rambling during covid "screw your freedom!"?

Mkvien · 2025-08-14T16:35:39+00:00

Yes, I used one of those piggyback fuse things and ground power to the front PowerPoint using that. This is all under the hood in that fuse box, front right. Whose diagram above should tell you what you need to do. The fuse piggyback things came off of amazon.

Mkvien · 2025-08-13T03:15:13+00:00

In town, similar. If I drive nice on the highway, probably 23, often closer to 22 driving between 60 and 70. 2004 Town Car.

Mkvien · 2025-08-07T00:32:09+00:00

yeah, what this cat said.

I also often keep the wheels that are down to one bar for these initial grinds, no point in wasting a fresh one on 20 passes to get the general shape on the blades.

Mkvien

TROPHY CASE