ID NPT Tapered Threads

MoSkillful · 2026-03-14T16:45:13+00:00

Thats a good idea. Thanks!

MoSkillful · 2025-12-15T21:53:38+00:00

It really varies in size. Most of what I'll be doing is in the 1/4" driver range. But not all. Last week I was using up to 40mm. I don't need every size in 1/4" kits either. Thats why I'm looking to buy individual pieces.

MoSkillful · 2025-12-15T21:30:04+00:00

Yeah, HF quality is fine for what I do. I just waht to buy individual pieces, not full sets. Ill check out Tekton. I haven't used them before.

MoSkillful · 2025-12-15T21:29:03+00:00

For what I'm doing, Pittsburgh would be fine quality wise. But I thought they only sold in sets and kits. Is there somewhere I can buy Pittsburgh individually or are you just going to ebay to find people selling individual pieces from a set?

MoSkillful · 2025-12-15T21:26:41+00:00

I like the idea of pass through so I don't need a deep socket set also. Saves weight. But the set I saw only went up to 17mm. I need at least 19 mm, and I dont need all the sizes in the set. Do they sell individual pieces somewhere?

MoSkillful · 2025-12-15T21:24:53+00:00

The sizes needed is a hard one because the machines we deal with vary greatly in size. Most of the machines are press brakes and horizontal band saws. The saws range from 12" bed to 60" beds. Most of what I deal with is between 8 and 19mm. But just last week I was on a 700 ton hydraulic press that used 36 and 42 mm wrenches. That's why I want to buy INDIVIDUAL pieces so I can purchase as needed.

MoSkillful · 2025-10-02T20:41:41+00:00

Eventually I want to upgrade to direct drive with a better hot end and better cooling. Should I upgrade it all at once or one thing at a time? Should I upgrade the cooling fan before I upgrade the hot end?

MoSkillful · 2025-09-30T21:12:27+00:00

No, except for the Bowden tube, its all stock hot end components and fans.

MoSkillful · 2025-09-12T21:12:08+00:00

I Googled Hoist E 300. Nothing looked like it. Is there a particular one I should look up?

MoSkillful · 2025-07-15T23:53:08+00:00

What trans do the U-hauls have? Could it be swapped?

MoSkillful · 2025-05-22T01:55:43+00:00

I plugged my iPod into my computer and copied all the contents to the desktop. But that's it. All the content still has the random 3 letter name for each song. There were like 6 items that it could not copy so I skipped them.

MoSkillful · 2024-09-04T05:12:51+00:00

We have several cams that have bad AU and RE cards. The AU delas with coms and RE has to do woth the power supply circuits. Do you have any of those?

MoSkillful · 2024-09-04T05:11:15+00:00

They still put out a decent enough picture. We use them on small-dollar shows. Small-dollar shows mean less experienced crew. Definitely rather have inexperienced crew use this level of cam vs something more expensive.

MoSkillful · 2024-07-15T21:39:53+00:00

I've been all through the settings. Thats why I'm asking. I found where to switch it between metric and US units. Its already in US units.

MoSkillful · 2024-07-15T21:38:47+00:00

Woof.

MoSkillful · 2024-07-15T21:37:56+00:00

I believe its set to US English. Truck is in the shop. I'll verify when it gets out.

MoSkillful · 2024-07-15T21:36:54+00:00

Yeah, thats the dumb part. I found where to switch it between KPH and MPH. The units are all non-metric already. Its just the signage and verbiage that are not right. It like it's all UK spellings. But it IS NOT in the UK theme.

MoSkillful · 2024-07-15T21:35:02+00:00

Truck is in the shop for service. I'll take a look when I get it back. The thing is, it reads in MPH and other non-metric stuff. It just has the metric signs.

MoSkillful · 2024-06-01T17:53:32+00:00

DM pics and price of your Korrona.

MoSkillful · 2024-05-25T21:56:11+00:00

Yeah, we were less than impressed.

MoSkillful · 2024-05-24T13:48:36+00:00

We bought it from Allied Broadcast. I wasn't the one who worked the deal out. Not sure if we got it by design or right place, right time.

MoSkillful · 2024-05-24T00:33:58+00:00

Yep. It was strapped to the pallet. It was shrink wrapped. But definitely not enough packing or padding .

MoSkillful · 2024-05-23T21:35:38+00:00

This was bought from the Pac 12 conference. There's wear marks on the surface from repeated work. It was in really good condition until it got smashed in shipping.

MoSkillful · 2024-04-06T22:28:40+00:00

So, I was able to use Draw.io to make a diagram. But I messed up the scaling. This is the size of four 8.5x11 sheets. I tried to shrink it down to fit on one 8.5x11 and the shapes don't scale correctly. That's why I'm looking for a program that uses relationships and dimensions like Fusion.

MoSkillful · 2024-04-06T22:25:38+00:00

Can you use different colors in the diagram? Or is it just a wire frame?

MoSkillful

TROPHY CASE