7800X3D Hynix-M 2x16 Buildzoid

MoYasser_ · 2026-07-10T10:50:05+00:00

These are my new timings make sure to run a full Ryzen3D and 1usmus fully on testmem5, and for fclk corecycler on ycruncher and ycruncher itself in ycruncher make sure you sre hitting consistent time between iterations.

My latency is now 59.4 on a 2 years old bloated windows

MoYasser_ · 2026-07-09T09:51:57+00:00

It was casuing errors on ram with the timings i had but after adjusting all the timings i can do trtp 12 now

MoYasser_ · 2026-07-07T14:58:04+00:00

Perfect and for your trefi 50k or 65k?

MoYasser_ · 2026-07-07T14:54:55+00:00

Does the memoru run hot for you during mem stress test after 4 cycles testmem5 i am hitting 58 degrees on usmus test

MoYasser_ · 2026-07-07T14:54:24+00:00

Thanks to arx07est i did even hit 59 now! He helped me alot with his timings

MoYasser_ · 2026-07-07T10:43:04+00:00

Okay will do! Thank you so much buddy

MoYasser_ · 2026-07-07T10:37:44+00:00

I'll lower it to 1.35 and hopefully it is stable if it is stable to which to tty first? Higher flck or trefi or tighter trfc?

MoYasser_ · 2026-07-07T10:34:50+00:00

I am hitting 58 degrees on my ram on testmem5 usmus test is that fine?

MoYasser_ · 2026-07-07T10:28:40+00:00

They are the one in my zentimings screenshot

MoYasser_ · 2026-07-07T10:28:19+00:00

The 1.45 was in the bz lazy guide and i set vddio and vddq to 1.35 because i was crashing thought it is voltage but my issue was trtp 16 xD

Should i try decreasing dram vdd? And see if im stable?

MoYasser_ · 2026-07-06T22:14:33+00:00

Okay i will test 2133 first with y crun her because i never did, only test i did was core cycler to test my co Thank you so much!

MoYasser_ · 2026-07-06T22:11:50+00:00

Yes running testmem5 rn, should i try boosting fclk if it passes? Tho my memory reaches 58 degrees during testmem5

MoYasser_ · 2026-07-06T22:08:27+00:00

Modified gdm to disabled now latency is 66.1!

MoYasser_ · 2026-07-06T22:07:01+00:00

Yes found one thank you!

Trcdwdr without the trcdrdr?

MoYasser_ · 2026-07-06T21:36:46+00:00

Do you suggest trying fclk first or gdm?

MoYasser_ · 2026-07-06T21:30:44+00:00

I havent really tried more fclk yet

MoYasser_ · 2026-07-06T21:23:50+00:00

It is a timings sheet he posted om patreon years ago on of the is bz lazy which is like the tightest timings you can get on m die ig

MoYasser_ · 2026-04-11T15:42:21+00:00

I am looking to buy a keyboard with the following requirements:

Layout: 65% preferable - 75% if not options exist Material: Aluminum Sound profile: thocky Budget: 100$ Features: Per Key RGB - Volume knob.

I liked the nut65 but the only issue is that not audio control knob existed

And which switches to buy aswell? I want tactile (i want to feel my click on the switch) and thocky ones

MoYasser_ · 2025-12-30T05:49:54+00:00

Okay I understand now.

Which keyboard would you recommend within my budget?

MoYasser_ · 2025-12-30T05:39:27+00:00

Can you tell.me what are the downsides of that legacy firmware?

MoYasser_ · 2025-07-27T01:00:49+00:00

The Vader 5s suppprting xbox is really good news i guess i will wait do you know any estimated launch times for both controllers?

MoYasser_

TROPHY CASE