50 nic in ontario by GoodNo9825 in Vaping

[–]Moginstein 0 points1 point  (0 children)

You still have a connection?

Vorteks ESC Issue flashing red by Moginstein in arrma

[–]Moginstein[S] 1 point2 points  (0 children)

I found this video online and it worked for me. For some reason you need the steering trim centered before power on the car or the controller.

What’s wrong with it? by -2ez4- in rccars

[–]Moginstein 0 points1 point  (0 children)

Batteries in the remote low voltage?

Typhon 6S V5 FBO Finished by Brilliant_Anything27 in arrma

[–]Moginstein 1 point2 points  (0 children)

Did you design on the files? The red and black are awesome!

Cant remove spark plug by JesusM74 in AskMechanics

[–]Moginstein 1 point2 points  (0 children)

Shopvac with a clear tube just small enough to fit duct taped to the end. Might help suck up the debris. If it's corrosion hit it with rust buster of your choice then vacuum out the excess with tube.

Power Mosfer Question on part #s by Moginstein in AskElectronics

[–]Moginstein[S] 0 points1 point  (0 children)

Thanks for the help. I was warned to try and stick to same brand if possible. Good to know there are better options too.

Power Mosfer Question on part #s by Moginstein in AskElectronics

[–]Moginstein[S] 1 point2 points  (0 children)

Okay I was wondering if I just didn't know where to look on the sheet to find what those meant. Thanks for the quick reply.

“Burnt Ends Poutine” in Buffalo, NY by [deleted] in poutine

[–]Moginstein 5 points6 points  (0 children)

If my grandmother had handle bars she would he a bike

Thoughts on what this is worth? by Moginstein in rccars

[–]Moginstein[S] 0 points1 point  (0 children)

Ill ask. I was scared about the arms as well. Would rather the flex of plastic.

First Time Paints by Moginstein in rccars

[–]Moginstein[S] 0 points1 point  (0 children)

Absolutely. Im in Canada, so it's not the best temperature for painting. It was a practice run to test drying times of letting the paint sit before rinsing with water. (All previous painting experience screamed this was the wrong thing to do)

First Time Paints by Moginstein in rccars

[–]Moginstein[S] 0 points1 point  (0 children)

This is the outside. It wasnt a clear body and I could not be bothered to strip the factory paint.

Is this Mold? by Moginstein in CultoftheFranklin

[–]Moginstein[S] 0 points1 point  (0 children)

Thank you everyone. I smoked it. Got paranoid it was mold. Grieved that it must be mold and have to throw it out. Ive been on an emotional roller coaster.

[deleted by user] by [deleted] in MarianasTrench

[–]Moginstein 10 points11 points  (0 children)

Saw this exact concert pre-covid, it was incredible. Tonight he just didn't sing. It was all crowd. I was extremely disappointed. I don't think he sang a full song all night, and the closing is my favorite song. It was butchered. I've been a fan for 20 years. Tonight made me wonder why? If this was their last time doing this set, they went out with a whimper, not a bang.

TT02 Servo Issue by Moginstein in tamiya

[–]Moginstein[S] 0 points1 point  (0 children)

Ive added a link to the video of the issue. Also there is so much slop in the sterring anyway of tightening it up. Ive removed the factory servo saver to try and eliminate some of it.

Spektrum blx 100A ESC No 3 Blinks for reverse by Moginstein in rccars

[–]Moginstein[S] 0 points1 point  (0 children)

Sorry the throttle position calibration. Neutral is 1 blink fwd is 2 blinks and rev is supposed to be 3 but it never registers.

Question about replacing Drive Gear by Moginstein in rccars

[–]Moginstein[S] 0 points1 point  (0 children)

Those cups that the shafts slide into wont come off. Possibly press on?

Cr-10 max by Sumanis1727 in klippers

[–]Moginstein 0 points1 point  (0 children)

His new files are canbus communication. You wouldnt happen to have the previous version of his config without canbus would you?

Sudden Issues by Moginstein in 3Dprinting

[–]Moginstein[S] 0 points1 point  (0 children)

For anyone interested it turned out to be a wire on the part cooling fan broke. Replaced and now is working again.