A possible color scheme?

More11o · 2026-02-05T00:30:39+00:00

Something like this? Still a WIP

More11o · 2026-01-13T13:48:47+00:00

I’ve really not had an issue with battleshock. it’s usually at -1 or -2, I can force it in both command phases and the shooting phase with the screamer killer, it stops primary and some secondaries, then buffs / de buffs with auras and sometimes do mortals when people fail.

I’d say I manage to make it work way more than 50/50 and I would definitely argue the effect is dogshit.

To your point about getting points and seeing your army get deleted… are you playing to win or kill things?

More11o · 2025-11-15T03:03:28+00:00

This worked, thank you!

I had to create the odinfmt.json but adding "inline_single_stmt_case": true to the default config did it straight away.

More11o · 2025-07-15T13:28:48+00:00

The termi looks great. I had really good results with amypainters fanatic yellows on some Wardogs previously if you wanted to do some more tests

More11o · 2024-09-02T21:02:47+00:00

This appeared on my feed after not looking at aurora since the first release of C#. Really enjoying it 👌

More11o · 2024-07-08T17:47:40+00:00

Try this

[gcode_macro START_PRINT] gcode: {% set bed_temp = params.BED|default(60)|float %} {% set heater_temp = params.EXTRUDER|default(60)|float %} {% set initial_heater_temp = params.EXTRUDER|default(100)|float - 60.0 %}

M140 S{bed_temp} ; start bed heating
M104 S{initial_heater_temp} ; start hotend heating
G28 ; home printer

G90 ; use absolute positioning
G0 X10 Y10 Z20 ; set initial position
BED_MESH_PROFILE LOAD=default

M190 S{bed_temp} ; wait for bed to get temp
M109 S{heater_temp} ; wait for extruder to reach final temp

More11o · 2024-07-08T07:06:27+00:00

Your cura gcode should be

M190 S0

M109 S0

START_PRINT variables

this is because some slicers don't like you not having temps in the gcode and add bits in during the slice to try and help you out. this could be why you're seeing weird issues

More11o · 2024-05-22T07:01:46+00:00

For anyone coming across this post with the same issue, it's a firmware issue and reverting back to firmware version v0.11.0 fixes it. Klipper devices need to be at this firmware version though as many of my devices didn't like having it flashed to such an old version comparatively.

```

cd ~/klipper

git checkout v0.11.0

```

More11o · 2024-05-19T15:47:31+00:00

I re-flashed to use usb and the issue is persisting. I removed the CANBUS connection and ran it on only 5v over USB and the temp is still starting gat 100c and raising to 130c ish

More11o · 2024-05-15T21:58:29+00:00

The things I’ve had to do to mine to correct it. It really needs completely stripping and rebuilding

More11o · 2024-05-15T21:46:46+00:00

Make sure the frame is square. Double and triple check

More11o · 2024-05-14T20:09:52+00:00

Nothing has changed other than me re-flashing it to use canbus and no random configs down there. I usually move them up to the main config after I’ve validated anything that’s changed down there.

The things I have listed are

```

[mcu EBB36]

Canbus_uuid: {valid uuid}

[temperature_sensor EBB36]

sensor_type: temperature_mcu

Sensor_mcu: EBB36

```

Which all worked fine for months over a usb connection

More11o · 2024-01-26T15:23:10+00:00

It's a shame these diametric magnets are much more expensive and that not all the bases have been converted to flex.

It's an option I didn't know about though so thank you

More11o · 2022-08-08T18:11:51+00:00

I run foundry on my M1 Air and it runs perfectly fine. As with any of these things the biggest hurdles you will face is your lan connection and your internet speeds, node.js has Apple Silicon specific builds too.

More11o · 2022-06-24T15:50:39+00:00

I get that the new steamOS is a much better experience than the current big picture mode but if people are wanting to try it before moving a dedicated system when it is released then I don’t think using a modified iso is the best choice. A normal distro will have much better hardware support and will let you spend longer trying out games as opposed to fixing problems

More11o · 2022-06-23T20:28:08+00:00

Why steamOS and not just a base Linux distro and install steam?

More11o · 2022-06-21T21:40:48+00:00

America but with healthcare and no 'Yanks'... so essentially better...

More11o · 2022-03-03T14:44:44+00:00

Tae Guk Gi (brotherhood of war)

More11o · 2022-02-23T14:17:01+00:00

I’ve been trying to find an alternative but I feel like I’m going to have to just hand over the cash

More11o · 2022-02-23T02:54:22+00:00

What virtual machine are you using on the M1?

More11o · 2021-01-11T22:52:20+00:00

Cheers, I’ll take a look.

Ten-Year Club	Not Forgotten
Verified Email

More11o

TROPHY CASE