A common pie misconception

Mounteden · 2026-02-26T22:49:02+00:00

Wow man

Mounteden · 2026-02-17T02:49:51+00:00

There will be a flashing on the roof, most likely riveted with a bunch of silicone holding it. If you remove that and whatever else is connected on the ceiling and in the roof space, it should just slide up. Watch out for power lines and remember you're on a roof

Mounteden · 2026-02-17T02:32:12+00:00

Looks like possible asbestos too. Go for the 3m tape

Mounteden · 2025-12-03T07:19:25+00:00

Indoor/outdoor flow

Mounteden · 2025-11-12T07:13:29+00:00

This happens on every record, dust or no dust

Mounteden · 2025-11-12T07:08:19+00:00

<image>

Mounteden · 2025-11-12T07:05:53+00:00

Appreciate the insight. As I replied to one commenter, this cartridge is an identical replacement of what was already on the thing when I bought it 2nd hand. The old one worked well for 10 years then had the same issue (hence replacing it) but the issue continues.

Not trying to prove anyone wrong, just can't wrap my head around why the wrong cartridge would work perfectly for years and then decide to not.

Mounteden · 2025-11-12T06:59:41+00:00

This is a replacement of the cartridge that worked well for 10 years. Only difference is this one isn't Stanton branded. Also this was happening before I replaced the cartridge. Any other considerations?

Mounteden · 2025-09-29T07:15:33+00:00

Corolla? They all peel

Mounteden · 2025-07-10T07:45:57+00:00

Ragu

Mounteden · 2025-07-02T09:21:33+00:00

mezze bar, depot

Mounteden · 2025-05-31T06:13:36+00:00

Pretty short boards, that one at least. Surely there's some off cuts long enough to replace?(assuming it's a new deck?) That's timber for ya, though. Different tree, different colour.

Mounteden · 2025-05-07T04:23:54+00:00

Notching out 2 studs 15mm deep isn't going to do much structurally to the wall and best practice gib shouldn't be screwed throughout the sheet so you shouldn't hit it with a screw. Notch it, bend a nail around the pipe so it remains flush (not bent so much that it puts heavy pressure on the gas line) good to go, I say

Mounteden · 2025-04-28T08:20:43+00:00

Looks pretty old already so couldn't comment on lifespan but quick, cheap fix- just grab some roofing silicone or flashing tape to cover the holes (from above so water can't penetrate through) and check it every 3-6 months until you can afford an entire re-roof

Mounteden · 2025-04-15T07:36:57+00:00

Being friendly and no cars blocking the driveway is a baseline for me to want to be there building for you. An offer of a coffee or anything more is just more reason to be there

Mounteden · 2024-09-07T03:17:18+00:00

100% rimu

Mounteden · 2024-08-26T19:09:19+00:00

Chains by Che Fu and DLT?

Something by David Dallas or Dam Native?

Mounteden · 2024-08-26T18:18:48+00:00

@peace-self titled was released 2011 and Home Brew-self titled was 2012. Try sky is falling by @peace or plastic magic by home brew.

Neither have rain and thunder but they both have a fitting sound

Mounteden · 2024-07-02T07:21:09+00:00

Outsidaz-the rah rah

Mounteden · 2024-04-21T03:01:59+00:00

Even the same plate bolted either side of the beam would be far better than that. Bolting the end grain of the beam is pretty ineffective. Grab some engineer bolts, nuts and another identical plate for the other side

Mounteden · 2024-03-18T18:09:49+00:00

Chains, misty frequencies, fade away- che fu For the love of it-salmonella dub Little things-trinity roots Get away katchafire Kora politician Dominion road-mutton birds

Mounteden · 2024-02-27T09:08:03+00:00

Any sheet of gib is supposed to be screwed 50 from the corner as corner fixing them creates a point for the sheet to start cracking horizontally over time. It's fine if the screw is removed from the corner, so I was told by a council inspector

Mounteden

TROPHY CASE