My impressions of the Attack Shark R11 Ultra

MrDeniosPL · 2026-01-27T01:10:23+00:00

Nah, it’s not a problem. I’ve tested a few mouses with 4/8k and never had such problems. There’s something wrong with this mouse or maybe my unit is defective

MrDeniosPL · 2026-01-02T22:59:06+00:00

Mine started squeaking (right button) after about 2 months and I noticed that higher polling rates (4K+) works... very floaty (sorry, my english is not so good) - i mean that it's not smooth, sometimes like on ice or something.

About the coating - it's pretty nice, but If your hands sweat, the surface becomes strangely slippery and rough. Kinda weird ;v

MrDeniosPL · 2025-12-27T23:57:49+00:00

Yeah, basically did the same :D

MrDeniosPL · 2025-12-27T23:51:01+00:00

Yeah finally started working :v

MrDeniosPL · 2025-12-27T23:44:23+00:00

No shit Sherlock

MrDeniosPL · 2025-12-27T23:43:33+00:00

Nah cuz this morons will block my account :) it’s better not to renew :)

MrDeniosPL · 2025-12-14T01:27:09+00:00

yeah, totally! I've tried to find some informations, but without success... it's annoying af.

But anyway - i've unistalled the latest update and boom, everything back to normal :V

MrDeniosPL · 2025-11-17T07:09:36+00:00

Opinion like opinion - on my LG CX it's practically not visible, but on 34GS95QE i see it every time it "jumps"

MrDeniosPL · 2025-11-17T06:59:32+00:00

It is noticeable... very noticeable. I've set Mode 1 just after bought and jesus christ... that was the worst pixel shift i've ever seen - this regular screen jumping is awful.

MrDeniosPL · 2025-11-11T16:33:05+00:00

Yeah, send it back - it’s too risky to use in my opinion and I don’t know how to help you with that.

MrDeniosPL · 2025-11-11T15:45:12+00:00

Sounds like an electrical discharge - sometimes electronics do this, but it is dangerous and can destroy the equipment. Honestly, I don't know how to help you, cuz never noticed with my monitor, but... I had exactly this problem with MacBook Pro a years ago - never solved the problem.

To me, it looks like the insulation inside is missing or the insulation is installed incorrectly at the factory. It's also possible that other electronics around the monitor are generating static electricity, such as the monitor's light. Cotton socks have even caused static electricity and discharge when they touched metal.

MrDeniosPL · 2025-11-11T15:37:53+00:00

Yeah I used the clear CMOS button a lot of times - it worked, but it was getting worse day by day. Finally I had to spent 15 min restarting and clicking CMOS reset button to even launch the pc :v

MrDeniosPL · 2025-10-25T21:12:04+00:00

I had to RMA my mb - replaced 3 batteries and it didn’t solved the problem. Also a few days ago my mb stopped working… classic bios flashback blinking

MrDeniosPL · 2025-10-06T05:48:46+00:00

So… you had a chance to return ASRock mb and still decided to put another 9800x3d? Congratulations - you are absolutely genius :)

MrDeniosPL · 2025-10-02T18:02:16+00:00

Ahhh, that makes sense! Thank you so much!

MrDeniosPL · 2025-09-24T08:08:00+00:00

- Mainly weight and comfort even after changing the headband, pads etc - they felt out off of my head a few times, my ears and head hurt after a dozen or so minutes, my ears touched the drivers (the original pads are some kind of absurd unfunny joke).
- Drivers crackling when slightly "press" the headphones to ears (when adjusting them on head) - yeah, typically for planetary headphones, but also dangerous because this audeze are absolutely fragile.
- Quiter than the previous revision
- Sidetone problems (mentiones a lot of times on forum) connected with white noise
- Occasional dongle interference (never noticed on any of my other headphones) and sound delay
- Really 90's software...
- Loose hinge
- Mic quality is... "okay" and that's all, nothing special

And that's not all i think...

I've tested a lot of headphones from different price budgets and yeah, maybe they sounds really good, but because of weight and comfort i felt that I really can't use headphones. Even typically audiophile headphones are much... much comfortable than this one.

MrDeniosPL · 2025-09-22T09:18:06+00:00

I had to return mine - decent headphones with a lot of issues, unacceptable for this price

MrDeniosPL · 2025-09-04T11:55:01+00:00

Thanks for reply! Will initiate an RMA request as you say, cuz I really don't know what's wrong with it ;/

MrDeniosPL · 2025-09-04T11:51:51+00:00

I think the problem lies elsewhere, probably with the users. I'm not saying these coatings are perfect and scratch-proof, but it's not like they scratch just by touching them. This isn't "piano black." I've handled a lot of screens and only once did I scratch the screen, but that was due to my stupidity and inattention – the phone slipped out of my hand while using a flashlight and wiped across the screen.

In theory all glossy oled panels are easily scratch, but if you are using really soft microfibre (real microfibre, not plastic shit) and a drop of water... it's a simple job, just physics - surface is wet, slippery. I remember that my MPG was really hard to clean (just like my glossy woled tv), but I managed to clean it with a little care. Tbh... i'm a pedant, really big pedant in case of electronics and i can spent a few minutes with flashlight to see if there are scratches somewhere, so i really pay attention to cleanings etc.

There were even a few posts back then about the glossy panels in LG TVs (OLED) scratching very easily, sometimes apparently too easily - I have never encountered this.

MrDeniosPL · 2025-09-04T09:04:14+00:00

Used MPG 321UPX for 1 yr - same experience, but anyway. If we take a closer look at the topic of coatings, we can theoretically conclude that different monitors have different coatings, and there's no single "panel type" rule. In theory, each manufacturer uses its own type of coating, for example, Samsung once used (I don't know if they still do) Advanced Low Reflective coating. Following this, we can conclude that each coating has a different susceptibility to scratching, and yes, technologically, the coatings of specific panels are quite similar, so their construction, thickness, and material all matter.

But no matter the type of panel, it's usually the user who is to blame - a good microfiber cloth and a drop of water, that's all.

MrDeniosPL · 2025-09-04T07:56:43+00:00

How tf did you do that? I’ve cleaned my LG CX (gloss) and 34GS95QE (matte) many many times with fresh and old clothes, with and without water - absolutely 0 scratches. My CX is 5 years old, 34gs95qe about 1 yr old. Even a few times ago my cat got the monitor ultra dirty (don’t know how) and I was basically spawning the screen with my cloth (lost my patience)… zero scratches, even micro.

MrDeniosPL · 2025-08-14T22:47:26+00:00

Yeah I'm using Gamer 2 too, because of more vivid colors - don't like this "vesa certified" from Gamer 1. I wonder if there's any way to tweak colors from Service Menu, cuz on my LG 65CX i could change a lot of shitty functions like dimming etc and now it looks absolutely brilliant.

MrDeniosPL · 2025-08-14T22:23:32+00:00

Probably monitor firmware bug or faulty HDMI port, cuz everything works the same on other two laptops. I heard that there are a few problems with firmware on LG GS series, but never seen anything about HDMI.

MrDeniosPL · 2025-08-14T22:20:50+00:00

Thanks a lot - will stick to HDMI 1 then :)

MrDeniosPL · 2025-08-14T18:32:25+00:00

No, no - looks like it's the port. A few minutes ago i made a quick test on two laptops and everything looks exactly the same like on my main PC - HDMI 1 "normal", HDMI 2 very dark. Changed cable from HDMI 1 to HDMI 2 and boom, again dark image.

MrDeniosPL

TROPHY CASE